Sel uji iklim 5500 liter (5,5 m³)

CTS CW-60/5,5 -60°C bis +100°C

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Lodox Eaxbjpfx Ah Toac Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: bekas, Ruang pendingin/pembeku Viessmann - Dimensi luar: 3300 x 2100 x 2450 mm - Dimensi dalam: 3100 x 1900 x 2250 mm - Ketebalan panel: 100 mm - Lebar pintu: 800 mm - Lantai stainless steel - Unit dinding lengkap - Stok: 1 unit - Ruangan mudah dipasang Ljdsxqpgrspfx Ah Toac

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity Laedpfjx D Abpjx Ah Tsc - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: baru, nomor mesin/kendaraan: 1900040028, panjang sabuk konveyor: 1.700 mm, lebar sabuk konveyor: 440 mm, kecepatan sabuk konveyor: 57 mm/dtk, daya: 0,18 kW (0,24 hp), tegangan masuk: 230 V, frekuensi input: 50 Hz, Voran conveyor belt 1,700 x 440 mm Laodpfx Ajtv E Dioh Tjc FDA compliant

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, gaya penekanan: 15 t, Hidralmac Single Column Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic single column combination press from the manufacturer Hidralmac with a press force of 15 tons. The machine is configured as a manual special solution and is particularly suitable for flexible assembly, straightening, and pressing operations in workshop and service areas. The table plate can be swung out to the left. The lower base plate can be inserted at 3 different heights. The ram can be manually moved downwards with the aid of the cross handle. Special features of this press: The operator can very sensitively build up pressure from 0 to 1.5 T. This is very important, for example, when pressing in ball bearings. We have supplied this press type several times to the aviation industry, where precise and careful work is crucial. After exact positioning, a pressure of up to 15 tons can then be applied via the hand pump. ##### Technical data + information: Assembly/disassembly press – 15 T – 270 × 600 mm ==== General information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm Laodofhcc Ijpfx Ah Tjc - Hole in table: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel construction - Table: swing-out feature - Lower table: height adjustable (3 positions) ==== Hydraulic cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & drive - Drive: manual via hand lever and hand pump - Fine control: 0–1.5 T via cross handle - Hand pump: 0.5 l - Pressure gauge: manometer ==== Controls - Operation: manual via hand lever and cross handle - Pressure regulation: mechanically, with sensitive adjustment ==== Safety - Anti-rotation lock - Sturdy frame construction ##### Fields of application: Press-fitting, press-out operations, assembly, disassembly, straightening, bearing handling, workshop tasks, maintenance, precision assembly, on-site service, small batch production Hydraulic press, hydraulic machine, assembly press, disassembly press, workshop press, 15 T press, 15 ton press, manual hydraulic press, C-frame press, single column press, C-press, hand press, pressing-in press, bearing press, industrial press Looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which builds on these standards. Our main strengths are custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulics of our presses are primarily equipped with components from leading European manufacturers.

Kondisi: sangat baik (bekas), Weiss Model: WK 27'/50-150 Climate Test Chamber Water-cooled Technical Specifications: Test chamber designation: WK 27'/50-150 External dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating operation: -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (temporal) Temperature constancy: ± 0.1 to 0.5 K (temporal) Climate operation: 10 to 90°C Humidity: 10...98 % RH Temperature constancy: ± 0.1 to 0.5 K (temporal) Dew point range: +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Includes extra floor plates to increase floor load capacity For your security as a buyer, please note the following information: The following steps are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful checks, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) Lajdpfx Ahjvx Nfbs Tsc (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Tahun pembuatan: 2017, jarak pergerakan sumbu X: 435 mm, jarak lintasan sumbu Y: 465 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 80 kg, tinggi total: 2.755 mm, panjang total: 3.360 mm, lebar total: 3.870 mm, berat keseluruhan: 8.500 kg, hidung spindel: MAS BBT 40, matsuura-mx-330-pc10 Ledpfey Ny Aksx Ah Toac

Kondisi: bekas, Tahun pembuatan: 2020, en Lasdpfx Ahjywgh No Tsc

Kondisi: bekas, en Ledpfx Aox Eyhfjh Tsac

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, steu-max5-dsm-specs Ledpfxjy Du I Re Ah Teac