Sel uji iklim 5500 liter (5,5 m³)

CTS CW-60/5,5 -60°C bis +100°C

Kondisi: sangat baik (bekas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber used for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber enables you to evaluate the functionality or material properties of a test object under the influence of temperature and humidity. Optimal air distribution with a correspondingly high recirculation volume ensures efficient transfer onto the test items. The air conditioning compartment is located at the rear of the inner chamber. The system components are situated behind the unit in a separate frame, providing easy access. Controls are housed in a separate electrical cabinet. The operating panel is integrated into the cabinet door. For humidity removal from the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be supplied to the chamber via a blower system. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test specimen and radiant heat, measured in supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity * Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1 - ±3% r.h. All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without heat irradiation, and without additional equipment. Dimensions: Internal Chamber/Test Area: - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm; Width: 1,600 mm; Depth: 1,550 mm External Dimensions: - Height: 2,800 mm; Width: 2,250 mm; Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power consumption: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: Refrigeration Unit: - Water-cooled, low noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection possible by arrangement (46325 Borken) Godpfx Aox Eabpofhebi - Shipping via freight forwarder available – costs & arrangements upon request - Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved.) We are happy to answer any further questions via telephone.

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), 1 Gbsdpfxotu I A Ro Afhji

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Godpox D Abpefx Afhebi Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), Mesh grates / support shelves for pallet racks for 180, 270, and 360 cm rack bays Specifications: Material finish: hot-dip galvanized Total width: approx. 1,340 mm (cross-bar direction) Total depth: approx. 1,080 mm (bearing-bar direction) Suitable for frame depth: 1,100 mm Clear support width: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Bearing bar height: 30 mm or Material finish: hot-dip galvanized Total width: approx. 1,330 mm (cross-bar direction) Total depth: approx. 1,040 mm (bearing-bar direction) Suitable for frame depth: 1,050 mm Clear support width: approx. 940 mm Beam support: approx. 50 mm Gbsdpfx Afop Duf Nshei Mesh size: approx. 45 x 70 mm Bearing bar height: 30 mm We have mesh grates in stock for the following rack depths: 1m, 1.05m, 1.1m, or 1.2m This mesh grate is perfectly suited for making optimal use of your rack system and provides outstanding support for your warehousing requirements. Price on request – Contact us for advice! Are you looking for additional shelves or mesh grates in other configurations? No problem! Our team will be happy to assist you in designing a bespoke racking solution tailored to your specific needs. Do you have a rack system to sell? Simply send us photos and dimensions, and we will prepare a fair offer for you. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Benefit from our delivery service directly to your facility! If you have any questions, do not hesitate to contact us – we look forward to your call or message!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Thermo container, used; refurbished with signs of use Model designation: C-720ü Technical Data Internal dimensions: 610 x 810 x 1440 mm External dimensions: 735 x 955 x 1770 mm Weight: approx. 90 kg Volume: approx. 720 liters With guide rails for shelves Features Central locking on door 2 side pull handles 1 fold-down handle in door recess Chassis with 108 mm PA castors, suitable for cold storage Door retainer Internal tub with insertion rails Corner supports with edging PE panels (2 mm thick), light blue Profiled protective plates (3-sided) Gjdpfx Asd Syhaefhebi 2 fixed wheels, 2 swivel castors, Lockable with padlock Load capacity up to approx. 400 kg From company liquidation, REFURBISHED Prices: net per unit plus current applicable VAT. Final cleaning to be carried out by buyer Auction consists of one container Color sold according to stock Inquiries regarding this item can only be answered if a telephone number is provided, due to time constraints. Approx. 100 units available Item is offered for self-collection only. If you require shipping, please contact us by phone in advance.

Kondisi: bekas, Ruang pendingin/pembeku ILKAZELL - Dimensi luar: 3450 x 3200 x 2450 mm - Dimensi dalam: 3250 x 3000 x 2250 mm - Ketebalan panel: 100 mm - Lebar bebas pintu: 1000 mm - Lantai dengan pelat baja tahan karat - Satu set unit pendingin dan evaporator termasuk - Stok gudang: 1 unit - Ruang mudah dipasang Gbedpfoxqp Ntsx Afhoi

Kondisi: bekas, Panjang: sekitar 2,6 m Lebar: sekitar 1,7 m Tinggi: sekitar 2,3 m Perlengkapan: Unit pendingin (Technobloc, tipe: ACN050U, daya: 0,7 kW, refrigeran: R404a) Godpfjw Tmlljx Afhebi

Kondisi: bekas, Ruang pendingin/pembeku Viessmann - Dimensi luar: 3300 x 2700 x 2250 mm - Dimensi dalam: 3100 x 2500 x 1960 mm - Ketebalan panel: 100 mm - Bukaan pintu: 800 mm Gbedpsxqn U Iofx Afhji - Lantai baja tahan karat - Termasuk unit pendingin dan evaporator - Stok gudang: 1 unit - Ruangan mudah untuk dirakit

Kondisi: sangat baik (bekas), Here we offer you a Köhler salt spray chamber. Köhler salt spray chamber corrosion test chamber Köhler salt spray chamber HKT 500 Operation via touch panel Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Test chamber volume: 500 l Temperature range: chamber ambient temperature up to 50°C Power supply: 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors are excepted!) Gbodpfxon Arqde Afhji If you have any further questions, we will be happy to answer them by phone.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, Here are the technical specifications of the machine on offer: If the press does not exactly match your requirements, you can request an individual quote tailored to your needs with just one click: Godpjfhcc Isfx Afhobi Contact us for a customised offer. HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly attractive prices! ##### Technical Details Pressure: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Oil tank: 10 l Robust machine frame with solid welded construction, manufactured in accordance with DIN 8651 ##### Additional Information Thanks to durable engineering, low-maintenance and reliable Cylinder with induction hardening and chrome plating Steel quality: structural steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 t rotary mandrel attachment, mechanical, with locking mechanism, spline shaft and brake, offering 220 mm travel Hydraulic hand pump with max. 15 t pressure and 160 mm travel, with return spring Throat depth from rear wall to centre of tool holder: 280 mm Assembly table can be swivelled 180 degrees to the right, featuring a 60 mm centre bore, M12 T-slots Clearance height between swivel table and ram/rotary mandrel guide: 450 mm Clearance height up to the additional table (insertable): 650 and 800 mm Additional table with central bore, 60 mm (insertable), M12 T-slots, size 270 x 200 mm Base height with two compartments for additional table: 750 mm On the cylinder, a hardened pressure plate with a diameter 10 mm larger than the cylinder Tool holder M30 in the cylinder head Pump lever operated from top to bottom Oil tank for 10 l hydraulic oil AW 46 Machine frame finished in blue, RAL 5012, textured paint Attachment parts finished in anthracite, RAL 7021 Hydraulic single-column combination press as special machine, 15 tonnes, manual operation (C-frame press, hydraulic press) ##### Are you looking for a customised machine? Contact us for a tailored quote. Our hydraulic presses are built in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they are fully compliant with the national Brazilian safety directive NR 12, which is based on the former. Our major strengths are special-purpose machine manufacturing and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly low prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.