Lemari uji suhu 25 liter

CTS T-40/25 -40°C bis +180°C

Kondisi: sangat baik (bekas), Weiss temperature chamber Air-cooled We are offering a Weiss temperature chamber for sale. Weiss temperature chamber with S!MCON / 32 control system Test chamber volume: approx. 195 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 450 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 14 A Data for temperature testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Fjdpfxegmhrfs Am Sjph Heating: 4 K/min Cooling: 4 K/min Heat compensation max.: 2300 W Refrigerant: R404 A, 2.5 kg Weight: 490 kg Model: WT3 - 180/40 Important safety information for buyers! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone. Written orders are possible by email or fax.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, maximum inspection speed: 50cm²/s, inspection area X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Includes calibration tool, manuals, camera, lighting unit, and repair software for error visualization. PC was replaced in 2012. Documentation available. Fodpfxotz Dkyj Am Soph

Kondisi: sangat baik (bekas), RMS Electrodynamic Vibration Test System We offer you an RMS electrodynamic vibration test system. RMS Vibrations Test System Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Fpsdpfx Aogk I I Tsm Soh Condition: used Untested! Testing was not possible. Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, we are available by phone. Written orders are possible by email or fax.

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white Fjdpjvx S Hhjfx Am Seph - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: sangat baik (bekas), CTS Temperature Test Chamber T-55/1000 Li Water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerants R404A/R23 The model designation for the CTS chamber series consists of the following: For example, Type T-55/1000/Li 1) T stands for: Temperature 2) -55 stands for: minimum temperature -55 °C 3) 1000 stands for: 1000 liters of test chamber volume 4) Li stands for: special configuration for tests with lithium-ion batteries Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric entry of set values - Error messages in plain text - Ethernet interface - RS232 interface - Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-intensity LED light bar mounted on the door Shelf: Stainless steel, support area 970 x 980 mm Load capacity per shelf max. 35 kg Total max. load with full shelf configuration 100 kg 1a Port NW50 1b Port 2x NW125 1c Port 2x Rp 3/4" for Minimax Fsdpfxsvba Rao Am Sjph Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 2.5 K/min - Cooling: 2.5 K/min Heat compensation: - approx. 4000 W at +20°C - approx. 2200 W at -40°C Technical specifications refer to ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level

Kondisi: sangat baik (bekas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-cooled Includes metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Fedpewfdnisfx Am Soph Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following points are carried out in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss temperature chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Fjdpfx Amsp Dun Uj Seph Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation at chamber center: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4 K/min - Cooling: 3 K/min Thermal compensation: max. 4,500 W Feedthroughs installed as standard: - R1: NW 125 mm - L1: NW 50 mm Dimensions: Test chamber dimensions (W x D x H): 1,100 mm x 950 mm x 950 mm Housing dimensions (W x D x H): 1,390 mm x 1,525 mm x 1,995 mm Maximum load (evenly distributed) on test chamber floor: 150 kg Per shelf: 50 kg Total rack load: 100 kg Operational specifications: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission for water-cooled cabinets: max. heat emission to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 For your safety as a buyer, please note the following information: The following tasks are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Tahun pembuatan: 2011, Kondisi: baik (bekas), Essemtec Pantera XV Mesin Penempatan Komponen Otomatis Tahun pembuatan 2011 Komponen 0201 Pemrosesan gambar top-down Fedpfx Amsyxc I Uo Ssph Pengumpan pita cerdas (8 hingga 56 mm) Kecepatan penempatan 4.500 cph Perangkat lunak grafis yang mudah dioperasikan Penyelarasan optik “on the fly” Sistem Upward-Vision untuk inspeksi komponen Paket feeder: 9 – 740i kertas 8 mm 1 – 740i blister 8 mm 5 – 741i 12 mm 7 – 742i 16 mm 1 – feeder getar 1 – feeder strip tape

Kondisi: sangat baik (bekas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Chiller unit: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Fpsdpfeygunhsx Am Soh Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: baik (bekas), VCS4100-DE-2024 Fedpfx Aeuuiygjm Sjph