Sel uji suhu Sistem uji walk-in

CTS TW-60/9 -60°C bis +100°C 9m³

Kondisi: sangat baik (bekas), CTS Type: TW -60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 means: lower temperature limit -60°C 9 means: 9 m³ test chamber volume Technical Design: Cooling Unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical input of set values Plain-text error messages RS 232 interface Free switching channels for external test specimen actuation Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ±0.1 to 0.5 K over time Average temperature change rate measured with test item and heat radiation in supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar cell modules, 100% loaded Constant heat radiation: 3000 watts Technical data refer to ambient temperature of +25°C, nominal voltage 400V, without test item, heat radiation, or additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Internal chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW, nominal current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼“, female thread Condensate outlet, unpressurized R1“ female thread Weight: approx. 5609 kg Lhedpovb Hanefx Ac Asp Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. All information is non-binding!) For further questions, we are happy to assist you by phone.

Tahun pembuatan: 2022, jam operasional: 10 h, Kondisi: baru, Universal testing machine H5TMC Mechanical construction: according to DIN EN ISO 7500-1 2 backlash-free ball screw drives, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 test area up to rated load: Test area width: 420 mm (optional widening: +190 mm / +330 mm / +620 mm) Max. test stroke without test tools, adapters, and load cell: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: Conversion to floor-standing model, required additional component: base table Travel speeds: Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Lhjdpfx Ajiq Hw Uoc Asp Measurement range: within 0.4 - 100% of the rated load, class 1 (optional class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If, at the customer’s request, a factory or DKD calibration is to be performed at the installation location, this will be charged separately. Crosshead position measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position Resolution of the crosshead position measurement:

Tahun pembuatan: 2024, Kondisi: baru, nomor mesin/kendaraan: H3000-H5000TM,

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), en001 Lhjdjw R Rt Iepfx Ac Aop

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone. Ljdpfexdi Ezsx Ac Ashp

Kondisi: sangat baik (bekas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent at the top edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates flawlessly from a technical standpoint. The dent is purely cosmetic and has no impact on functionality, sealing, or control accuracy. Lhedowz Er Uepfx Ac Aop Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.H. Temperature/humidity fluctuation: ±0.3°C / ±2.5% r.H. Temperature/humidity stability: ±0.5°C / ±3% r.H. Heating/cooling rates & times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Port with silicone plug: 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel design, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg Important safety information for buyers! The following procedures are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and information!) If you have further questions, we are happy to answer them by phone.

Tahun pembuatan: 2016, jam operasional: 14.242 h, Kondisi: sangat baik (bekas), de Lhsdpfet Txqrsx Ac Aop

Kondisi: sangat baik (bekas), Atlas Type: SC 350 MHG Atlas-Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with sunlight simulation by MHG lamp). The unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Access ports for measurement cables available - Control via control panel or interfaces (RS232 etc.) - Robust test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) Ljdpjxbd Raofx Ac Ashp General Data: - Model: SC 340 MHG - Test chamber volume: approx. 335 liters - Cabinet weight: approx. 500 kg - Radiation unit weight: approx. 65 kg Technical Data: - Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) - External dimensions (W × D × H): 865 × 1,595 × 2,180 mm - Radiation source: 1 × 1,200 W MHG lamp - Irradiance: 800–1,200 W/m² - Irradiated area: approx. 3,300 cm² - Weathering: Spectrum 300–3,000 nm, compliant testing according to DIN 75220, IEC 60068-2-5, MIL-STD-810F - Temperature range with radiation: –20 °C to +100 °C (±1 K) - Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) - Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) - Noise level: approx. 58 dB(A) at 1 m distance - Power supply: 400 V, 3/N/PE, 50 Hz - Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications and information!) Feel free to contact us by phone if you have any further questions.

Kondisi: sangat baik (bekas), RS simulators RS Simulator ST2K 320/70D Water-cooled shock test system For sale is a high-performance thermal shock test system, model ST2K 320/70D. This system is ideally suited for standardized thermal shock testing according to DIN EN 60068-2-14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic test basket transfer, this unit provides the perfect solution for component, material, and reliability testing in industrial, research, and quality assurance applications. Main technical data: Temperature ranges Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lodpfx Acjwx Ip Do Aehp Humidity testing (optional) – Upper test chamber Temperature: +40 °C to +90 °C Humidity: 20% to 98% rH (±2–5%) Test basket transfer: Vertical movement, < 10 seconds changeover time Power supply: Total power: 16 kVA Current draw: 32 A Main fuse: 3× 35 A slow-blow Power connection: 3× 400 V / N / PE / 50 Hz Main supply line: 5× 16 mm² Water & compressed air connections Cooling water supply: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2× G ½", 1× G ¼", no pressure Supply of demineralized water: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & weight: Test basket internal dimensions (Type ST2K 320) Internal dimensions: width approx. 430 mm, height approx. 470 mm, depth approx. 700 mm External dimensions: width: approx. 1100 mm, height: approx. 2300 mm, depth: approx. 2300 mm Weight: approx. 1150 kg Other technical data Sound pressure level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, threshold 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, threshold 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% rH Important safety information for buyers! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally approved refrigerant if required 3. Leak test with certificate 4. Upon successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to call us.