Pengoptimal sabuk pengumpanan gergaji potong silang

CURSAL TRV 1200 Ø500 - Customizable

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication Kodpfx Acewvqklsisdn • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Kdsdpfx Aeu R Szajcijn Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Kondisi: baru, Tahun pembuatan: 2026, 10T ramp, usable internal width 1.7 m – TM-GROUP, the best choice on the market ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 1700 mm - Reinforced side guards on both sides - Ramp rollers for easy repositioning - Central handle for forklift positioning - Adjustable incline angle and flap height - Double-reinforced ramp supports - Movable elements equipped with grease fittings - Ramp additionally fitted with a winch Kdsdpowa Nr Nefx Acijn - ELECTRIC and manual height adjustment ✅ Drive-over grating: Grating with anti-slip grooves ensures a safe and stable surface. Both forklifts and pedestrians have optimum traction and stability. Competitors usually offer ramps with sheet metal and mesh overlays. Our product uses grooved steel grating—a significantly more durable solution that prevents dirt from collecting on the ramp and eliminates slipping hazards for forklifts. ✅ Forklift attachment – bi-directional: Practical and quick mounting for forklifts allows transport of the ramp in any direction. The specially designed handle enables precise maneuvering even in tight spaces. ✅ Chain for connection to truck, railcar, or fixed warehouse platform: A heavy-duty steel chain further increases safety, preventing the ramp from shifting during loading and unloading operations. ✅ Sturdy side rails: Protective rails with the option for removal and conversion to a frame/roof structure (roof optional). ✅ Electric height adjustment: Smooth electro-hydraulic system with high-quality pump. Operates with standard 230V power—can be connected to any regular socket. ✅ Dual-action hand pump: Hydraulic pump for height adjustment when no power is available—lifting action possible from both sides. Ideal for use in all conditions. ⭐️ Available variants: ⭐️ - Drive-over widths: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus - Mobile ramps with load capacities of 10, 15, 20, and 25 tons - Grating thicknesses: 3 – 5 cm - Colours: red, blue, black, green (custom colours on request) - Mobile ramp with cover/tarpaulin As the manufacturer, we also offer custom designs built to your specifications—in various sizes, load capacities, and configurations. Looking for a tailor-made solution you can’t find anywhere else? Contact our specialists! Keywords: Loading ramp, unloading ramp, drive-over ramp, mobile ramp, loading bay, transfer ramp, mobile loading ramp, mobile drive-over ramp.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 9.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3284, Versi standar RUF Lignum R2 dengan saluran keluar, motor listrik 22 kW, ukuran briket 150x60 mm, kapasitas hingga 500 kg/jam Kodpfxoyyl Sre Aciedn

Kondisi: sangat baik (bekas), Frezing spindle bawah SCM T150 Diameter spindle: 35 mm Panjang total spindle: 180 mm Kdsdpfx Acow Ral Hjion Pengangkatan spindle listrik Gerakan pagar listrik Sudut dapat diatur secara elektrik -10/45° Kecepatan spindle variabel: 3000-4500-6000–7000-10000 rpm Motor berkekuatan 5,5 kW Dokumentasi teknis DTR

Kondisi: baru, Tahun pembuatan: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roll drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Ksdpewt T Unjfx Aciedn

Kondisi: bekas, Tahun pembuatan: 2001, Lebar pelat pantul: 4000 mm Tinggi pelat pantul: 1000 mm Dimensi luar: 4600 x 1500 mm 2 x 1,5 kW motor Aliran volum nominal total: 7000 m³/jam Konektor ekstraksi kanan dan kiri dengan diameter 300 mm Lokasi penyimpanan: Garbsen Kdsdpfevvizkex Acien

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Ksdpfxogwbbqj Acisdn No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 926 h, tinggi total: 1.800 mm, panjang total: 11.250 mm, lebar total: 900 mm, de_hu_001 Kjdpfjyna Ezsx Acisdn

Kondisi: belum diuji (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Kdodsx Tu N Hepfx Acion Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...