Mesin las titik

DALEX PL 100-2

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, with DALEX DRF 5.2 cooling system. Kodpjiknv Eofx Ai Ienb

Kondisi: bekas, Length: 1800 mm Width: 1200 mm Knjdpfx Ajcxxu Dsi Ieb Machine weight approx.: 1.6 t Required space approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Tahun pembuatan: 1990, Kondisi: bekas, nomor mesin/kendaraan: 9072492, Rated power: 100 kVA Throat depth: 500 mm Knjdpfx Asz H Dyei Ijb Electrode arm distance: 330 - 500 mm electrical connection: 400 V kW Dimensions (L x W x H): 700 x 1420 x 2000 mm Weight: 750 kg

Kondisi: baru, Tahun pembuatan: 2025, Protec welding turning table with 5000 kg load capacity. Speed infinitely adjustable from 0.05 to 0.5 rpm. Handheld remote control. Height: 600 mm. Diameter: 1500 mm. Foot pedal remote control available at extra cost. Knsdpfoid Szcjx Ai Iob

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: complete overhaul by manufacturer in 1994 Weight: 3,700 kg Pulling force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min Knodpogyd T Ejfx Ai Ijb Return speed: steplessly adjustable up to 20 m/min Electrical connection: 400V / 50Hz

Kondisi: bekas, Unit pendingin, pendingin air sirkulasi, pendingin air, chiller O. Hellwig Knjdspu R Ncopfx Ai Ieb Tahun pembuatan: sekitar 1995 Kapasitas pendinginan: sekitar 8 kW Daya nominal unit pendingin: 3 kW Refrigeran: R422D Kapasitas tangki air: sekitar 35 liter Kapasitas aliran pompa sirkulasi: 40 liter/menit Daya pompa: 0,63 kW Koneksi air: 1/2 inci Koneksi listrik: 380 Volt, 50 Hz - Pengaturan suhu melalui potensiometer putar Dimensi (P x L x T): 1100 x 750 x 140 mm Berat: 285 kg

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Knjdpfx Ajhmvawoi Ijb

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Ksdpfx Aswp Nv Hoi Ijnb Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: baru, diameter ulir metrik (min.): 3 mm, diameter ulir metrik (maks.): 16 mm, berat keseluruhan: 500 kg, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, panjang umpan sumbu Z: 200 mm, torsi: 24 Nm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 50 rpm, daya: 0,005 kW (0,01 hp), The CMA three-axis controlled thread tapping center is specifically designed for the post-processing of laser-cut sheet metal parts, as well as complete machining of, for example, small components and tubes. The machine offers the following machining capabilities: - Thread tapping - Drilling (standard / with chip break / tube cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to those by Demmeler and Siegmund welding tables) - Radial tool compensation with patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Kedpjrbz T Nsfx Ai Ijnb Standard configuration: Automatic tool changer with 10 positions, mounted on the gantry of the machine

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 1.100 mm, daya nominal pada siklus kerja 50%: 96 kVA, arus hubung singkat: 31.500 A, tegangan masuk: 400 V, jenis pendinginan: air, berat keseluruhan: 830 kg, Perlengkapan: Pelat tipe tersedia, Spot Welding Machine Type PMS 11-4 G3, Three-Phase DC Version - Specially designed for welding aluminium sheets - Lightly used, fully inspected and cleaned - All functions operational, ready for demonstration - Rated voltage 400V/50Hz Ksdpfxjh N Sc Es Ai Isnb - Rated power 96kVA - Welding current 23kA - Connection cable cross section 10mm²/phase - Fuse protection 63A - Throat depth 1050mm (!!) - Electrode arm diameter 60mm - Electrode holder diameter 30mm - Electrode force 600daN - Stroke 65+25mm - Electrode taper MK2 - Control unit MPS 8043/1 by Harms & Wende, with current rise and impulse function – includes operating manual - 2-stage foot switch according to accident prevention regulations (UVV) - Main machine switch - Pneumatic maintenance unit - Weight approx. 830kg - Complete documentation with wiring diagram, pneumatic layout, and coolant circuit - VAT can be shown separately - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! Commissioning on-site for a fee, invoiced according to actual time required The machine is located in Dresden, near the A17, and can be inspected and demonstrated by appointment.