Mesin penggilingan CNC

Deckel Maho DMU 50evo

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 50.000 m/menit, pergeseran cepat sumbu Y: 50.000 m/menit, pergerakan cepat sumbu Z: 50.000 m/menit, lebar meja: 380 mm, panjang meja: 500 mm, beban meja: 200 kg, penjepit alat: 30 mm, de_to_hu_it_lt_001 Credpjw Rl Igsfx Ad Dsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 8.725 h, Fungsionalitas: berfungsi sepenuhnya, Deckel Maho DMU 50 EVO with ITNC 530 About the Machine: Only 2,684 spindle hours! Like-new condition! All hoses (pneumatic, coolant, refrigeration) have been replaced. The machine has been completely cleaned. It has been inspected and measured; a geometry protocol is available—geometry is excellent. Top specification! - Control unit: Heidenhain ITNC 530 - Travel X, Y, Z axes: 500/420/380 mm - Rapid traverse: 50 m/min - Spindle speed: 20–18,000 rpm - Tool holder: SK40 DIN 69871 - Tool magazine with 32 stations - Machine weight approx. 6,500 kg - Chip conveyor - Through-spindle coolant 40 bar with belt filter (rotary union NEW) - Rinsing gun - Coolant/air blast switching (M25) - Heidenhain TS 640 probe - Renishaw tool probe NEW (folds out automatically) Cedpfx Aexf Ud Sod Derh - Kinematic Quickset - Network connectivity - Automation interface possible Inspection and testing under power on site is of course possible. We will gladly offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From the machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work—you can rely on us.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 6503be52-d555-427e-9509-48d16ece3ca6 Credpfxew Nv Alo Ad Djh

Kondisi: baik (bekas), Tahun pembuatan: 2001, Dear Sir or Madam, We hereby offer you a 5-axis CNC machining center "DECKEL MAHO" DMU 50 eVo, used and in good condition. Csdpfxow Axahj Ad Djrh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 1.380 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 30, sudut putar sumbu B (maks.): 108 °, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Cedpfx Adewu Evts Dsrh Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool stations: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS CNC control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Automatic tool changer - NC rotary/swivel table - Through-spindle coolant (TSC): 40 bar preparation - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control: HEIDENHAIN Control: MillPlus iT Clamping surface of the table: ø 500 x 380 mm B-axis: 0 - 161.955° C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Infinitely variable feed rates up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Rapid traverse B-axis: 40 rpm Cjdpfswlvi Eex Ad Dorh C-axis rapid traverse: 50 rpm Tool magazine positions: 30 Tool diameter with 2 free adjacent pockets: 130 mm Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Through-spindle coolant supply: 40 bar Total connected load: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Kondisi: baik (bekas), Tahun pembuatan: 2006, TECHNICAL SPECIFICATIONS Main Drive Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position Measuring System Resolution C, B, X, Y, Z: 0.001 mm Position tolerance C, B, X, Y, Z: 0.010 mm Working Range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Max. tool diameter without free spaces: 80 mm Max. tool diameter with free spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface, rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm Credpfx Aeu Hkb Rjd Dsh B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: approx. 6,800 kg Operating weight: approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including but not limited to: Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage monitoring system Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the above information.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 control, EXCELLENT condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Model: iTNC 530 >> Travels: X 500 / Y 450 / Z 400 mm >> C-axis: 360 degrees >> B-axis: 0 degrees to 161.955 degrees Crsdpevyr Tdjfx Ad Dsh >> Tool holder: HSK A63 >> Max. spindle speed up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C/B-axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axis: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction system >> ICS (internal coolant supply) 40 bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Prepared for robotic loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following maintenance work has been carried out: >> Main work spindle completely overhauled >> Full maintenance: All coolant hoses and pneumatic hoses replaced, new filters, all fluids and belts renewed. Wipers and more. Thorough cleaning performed. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with TNC 530 3D path control from Heidenhain. The machine is in excellent condition. The main spindle has been overhauled (replacement spindle), fully serviced, and an inspection protocol is available. Take the opportunity to view and test the machine under power at our facility.