Pusat pemesinan universal

Deckel Maho DMU200P

Kondisi: baik (bekas), Tahun pembuatan: 2002, Pusat Pemesinan Universal Tipe mesin: DMG DMU 200 P Kontrol: Heidenhain TNC 430 M Tahun pembuatan: 2002 DATA TEKNIS: Perjalanan sumbu: Sumbu X: 1.800 mm Sumbu Y: 2.000 mm Sumbu Z: 1.100 mm Sumbu B: 0,001° Sumbu C: 0,001° Jumlah sumbu yang dikendalikan: 5 Rentang putaran: 10.000 rpm Daya penggerak: 44 kW Taper alat: SK 50 Changer alat Slot alat: 60 Meja putar NC Ukuran meja: 1.700 x 1.400 mm Lhsdpfx Acoxuqn Sj Hoc Beban maksimum meja: 5.000 kg Fitur perlengkapan: Konveyor serbuk Pendingin internal (IKZ): 40 bar Filter pita kertas Probe pengukur Handwheel elektronik

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. Lhedpfxexmhdno Ac Hec It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Pusat pemesinan 5-sumbu DECKEL MAHO DMU 200 P, No. 1099 000054 3, tahun pembuatan 2000 (overhaul total tahun 2024), jam mesin: 22.852 (spindel: 77.915), perjalanan XYZ = 1.800 x 2.000 x 1.100 mm, kontrol HEIDENHAIN, penukar alat, dengan sistem filter. Lhodpfjyhqzmjx Ac Hsc

Kondisi: baik (bekas), Tahun pembuatan: 2009, 10556 Lhsdpfx Ajxc Tt Toc Hoc

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Lhjdsw Df A Sspfx Ac Hsc Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0–115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2–150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, space requirement approx. 3.0x1.5 m Lodpfxsuy Ifge Ac Hshc The machine will be equipped with a new Siemens S7 control system including a new operator panel before sale. The dressing spindle for the grinding wheel is electrically operated via a servomotor. The machine will be completely overhauled, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed systems, workpiece rulers, etc.).

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Ledpforz Nflox Ac Hehc Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Ljdotzdyzspfx Ac Hshc

Tahun pembuatan: 2024, Kondisi: baru, Universal CNC router for cutting, engraving, and 3D milling of any desired shape. This model can produce half of the fixtures for kitchens and living areas. The easy-to-use Wattsan CNC milling machine is ideal for medium or large-scale production and will deliver precise results for your needs. Equipped with a planetary gearbox, the Wattsan M1 1313 enables effortless milling of hardwood and soft metals. Additionally, a vacuum table can be installed, providing rock-solid workpiece fixation. With a Wattsan milling machine, you can manufacture doors, tables, LED signs, machine parts, and many other items. It processes metal, hardwood, plastic, foam, aluminum, and plexiglass with ease. Contact our managers for further details! Lhodpfx Acoiicfbs Hec Wattsan M1 1313 Specifications: Working area: 1300x1300 mm Spindle: 3 kW Machine dimensions: 2080 x 1900 x 1890 mm Weight: 520 kg Virmer not only offers top-quality machinery, but also service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if needed. In addition, Wattsan machine owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. We are the official supplier of Wattsan. In addition to laser engravers, we also supply metal cutters, welding equipment, markers, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, constantly evolving with the help of customer feedback. Thanks to this feedback, Wattsan has made over 50 upgrades, increasing the reliability, precision, and performance of its machines so you can take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are at your service. Discover a wide range of laser machines and equipment from us: CO2 laser machine, metal laser cutting machine, laser metal cutter, fiber laser for metal, fiber laser marking machine, CNC milling machine for metal, woodworking milling machine, CNC milling machine, laser engraving machine, laser engraver, laser cutting machine for plywood, laser engraver, metal laser cutting machine, CNC milling machine, laser marker, lenses, chillers, machine cooling systems, S&A chiller, IPG Laser, MAX Photonics, Raycus, compressor, rotary device, mirrors for laser machines.

Kondisi: baik (bekas), Placa de mármol Longitud: 3500 mm Anchura: 1500 mm Espesor: 300 mm Altura sobre patas: 930 mm Lodpfx Acoig Hu Ns Hjhc Número de patas: 5 1 pequeño defecto en la parte superior (L 150 mm x A 20 mm) – ver foto Peso: aprox. 3 t