Meja universal

DECKEL 2114

Kondisi: bekas, Tahun pembuatan: 1999, X-axis travel 600 mm y-axis travel 525 mm z-axis travel 500 mm Table clamping surface 1000 x 543 mm Iodpfjtqqmhjx Apvjtg Spindle taper SK 40 Spindle mount DIN 69871 Spindle speeds - stepless 20 - 12,000 rpm Feed rates X/Y/Z axis 20 - 10,000 mm/min Rapid traverse X/Y/Z axis 18 / 18 / 15 m/min Table load capacity max. 350 kg Control HEIDENHAIN MillPlus Head swiveling +/- 90° Total power requirement 26 kVA Machine weight approx. 4.2 t Machine dimensions L x W x H 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Ijdpfx Ajynmpgjpvotg Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: bekas, Tahun pembuatan: 1982, Spindle diameter 90 mm X-travel 900 mm Y-travel 900 mm Z-axis 1200 mm W-axis 800 mm Clamping surface table 900 x 1200 mm Rotary motion 360 degrees Table load capacity 6.0 t Spindle speed 25 - 1400 rpm Spindle taper ISO 40 Power supply 380 V / 50 Hz Milling spindle drive 9.2 kW Total power requirement 35 KVA Machine weight approx. 10 t Space requirement approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, Itsdpfx Apotv H Ucovsg new control cabinet, new BOSCH servo drives and Heidenhain TNC 360 control (3D control), Facing slide Ø 600 mm, Traverse path 150 mm, The machine is currently not operational due to an electrical fault.

Kondisi: bekas, Tahun pembuatan: 1985, X-axis travel 485 mm y-axis travel 385 mm z-axis travel 380 mm Table clamping surface 800 x 460 mm Spindle taper SK 40 Control CONTOUR 1 Spindle speeds 50 - 2500 rpm Feeds 10 - 1000 mm/min Rapid traverse 2 m/min Table load capacity 600 kg Quill stroke 80 mm Total power requirement 7.5 kW Machine weight approx. 2.0 t Dimensions (L x W x H) 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system Itsdjtqqllepfx Apveg - X/Y/Z axes can also be operated via handwheels -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Machining centre Manufacturer: KNUTH Model: EcoMill 350 CNC Iodstiauhepfx Apvjtg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG-MORI DMU 60 EVO linear, tahun 2014 Lintasan X/Y/Z: 600 mm x 500 mm x 500 mm Spindel utama SK40 dengan 18.000 rpm Meja putar NC poros B dan C Majalah alat dengan 60 slot Penukar panas untuk spindle dan meja Dynamic package Isdpfx Apjxvhrwovstg Kontrol Siemens 840 D SL dengan Shop-Mill Probe ukur inframerah Heidenhain TS 649 Pengukuran alat laser Blum Konveyor sabuk geser, IKZ dengan filter kertas dan tekanan 80 bar Separator emulsi kabut oli Nozel pendingin yang dapat diprogram Handwheel elektrik, Mode operasi 4 Siklus pembubutan-milling

Kondisi: bekas, Tahun pembuatan: 1998, 1 Iedpfsw Rkt Iox Apvetg

Kondisi: bekas, en1-Technical Details: Travel path – Y-axis: Saddle on beam: 200 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table mounting surface: Attachment area: 760 x 200 mm Table clamping area: 630 x 200 mm Max. table load: 100 kg X-travel: table longitudinal: 320 mm Z-travel: table vertical: 350 mm Table swivels +/-: left/right 30° each Distance table-bottom edge of spindle, min./max.: 50 / 400 mm Table feed: Infinitely variable 14 - 71 mm/min Total power requirement: 4.0 kW Weight approx.: 1,200 kg Machine dimensions (LxWxH) approx.: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital readout for X and Y axes. Swiveling work spindle. Feed operates via variator gearbox. Swiveling table. Spindle rotational speed via 3-stage gear and 2-stage electric selection. Coolant system. Milling beam extendable by approx. 350 mm. Iodpfx Apju Ndb Ajvjtg The machine vice is recommended but not included in the scope of delivery. Can be purchased as an optional extra. *

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm Itodpfx Apjuha Umevjg - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel path Z: 150 mm - Travel path X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel path X/Y: 97/133 mm SUBSEQUENT MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 6 kW DIMENSIONS AND WEIGHT - Required space: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control system: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Itjdoh Hvk Aepfx Apvjg Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition