Mesin Penggilingan Alat - Universal

DECKEL FP 1

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Universal tool milling machine DECKEL FP 1 With 3-axis active digital display Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 Y 160 Z 340 mm Speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Swiveling vertical milling head Retractable quill Infinitely variable feed via potentiometer Iaodpfx Asw Agxroa Nol 1 pcs. machine vice 1 pcs. steady rest with counter bearing 1 pcs. long arbor ø 22 mm, ø 16 mm, ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pcs. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Kondisi: bekas, Tahun pembuatan: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop inspected Machine no.: 2102-5561 Milling head type: 2171 Iajdpor En Dysfx Aa Nel Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 With active function in X-, Y- and Z-axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 With drawbolt thread S 20 x 2 - Coolant system - Centralised lubrication, electric - Operating manual Sold as seen, without warranty The machine complies technically with the state of the art at the time of manufacture.

Kondisi: diremaj di bengkel (bekas), panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 340 mm, Updated Machineseeker Description (with axis travels) Deckel FP1 Aktiv – 3 axes – partially overhauled – immediately ready for operation Offered here is a Deckel FP1 Aktiv in technically tested and partially overhauled condition. The machine has been professionally refurbished and is in reliable, ready-to-use condition. Ideally suited for workshops, toolmaking, training, as well as single-part and small series production. This is not an unchecked used machine, but a technically reconditioned tool machine with a clearly defined scope of performance and predictable delivery time. Technical data and features Travel paths: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Iasdox Tdy Iopfx Aa Nol Workshop-tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of existing settings Renewal of all lubricants Replacement of selected standard parts and various wear parts Repainted in RAL 7035 / 7016 The deliberate decision for a partial overhaul offers an optimal compromise between operational safety, cost efficiency, and availability. A complete overhaul of the guideways was not performed, as there was no technical necessity to do so. Scope of delivery Machine loaded free onto truck Delivery time approx. 12 weeks

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Mesin Milling Universal untuk Perkakas Merek: DECKEL Model: FP 1 Aktiv Tahun pembuatan: 1990 – telah diuji di bengkel No. Seri Mesin: 2102-5866 Tipe Kepala Milling: 2171 Nomor Kepala Milling: 4613 Penerimaan geometris dengan protokol pengujian Aksesori: - Tampilan digital aktif 3-sumbu HEIDENHAIN TNC 113 dengan fungsi aktif pada sumbu X, Y, dan Z - Meja universal 590 x 250 mm (alur-T: 12 mm) - Kepala milling vertikal SK 40 dengan ulir penarik S 20 x 2 - Tanpa sistem pendingin cairan dapat dipasang jika diperlukan - Pelumasan sentral elektrik - Manual pengoperasian Iaedpfx Aaex S Edle Nol Bekas pakai sesuai kondisi, tanpa garansi Mesin secara teknis sesuai standar tahun pembuatannya.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.830 kg, Tahun pembuatan: 2011, Air Compressor Brand: Atlas Copco Model: GA75VSD FF Year of manufacture: 2011 Maximum Allowable Working Pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotational speed: 2975 rpm Weight: 1830 kg Dimensions: 2300 x 1100 x 2000 mm Atlas Copco Air Dryer Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power: 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Iasdpjv Nw A Aefx Aa Njl Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Kondisi: baik (bekas), Electric motor, three-phase motor, brake motor - Manufacturer: Siemens, Electric motor type 1LC3113-4BB23 Z from Deckel FP4L milling machine - Power: 4.0 kW - Speed: 1,435 rpm - Design: B14 - Protection class: IP 44 Iedoul H Dwepfx Aa Njal - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, 2-axis digital readout display (Heidenhain) Spindle taper: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Speed range: 40 - 2000 rpm (2 speed gearbox stages) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes comprehensive accessories: - Machine vice - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Further accessories available on request. Isdpfx Ajvnr Hyja Neal

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Iaodshpktvspfx Aa Njl Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baik (bekas), 1 used universal tool milling machine Manufacturer: Deckel Model: FP 1 Year of manufacture: 1982 Iajdporn I Rzjfx Aa Nol Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40 – 2,000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Kondisi: baik (bekas), EN-DECKEL FP 1 Tool Milling Machine No. 2101 with HEIDENHAIN 3-Axis Digital Readout Travel distances (X/Y/Z): 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Work area extension to: 300 x 260 mm Spindle speed (vertical/horizontal): 40 – 2,000 rpm Number of gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed rate X/Z axis: 5 – 500 mm/min Feed rate control: infinitely variable Rapid traverse X/Z axis: 1200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Iaedpfx Aaexyc Tks Nol Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to confirmation. Features: - For horizontal machining, the milling head is swivelled 90 degrees and pushed to the rear. - 3-axis precision digital readout by HEIDENHAIN - Infinitely variable feed in X/Z axis - The machine underwent a partial overhaul by a specialist company a few years ago. Equipment: - 3-axis digital readout (HEIDENHAIN) - Micro-coolant spray device - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: Good to very good, from training workshop Available from: March 2026

Tahun pembuatan: 1980, Kondisi: baik (bekas), Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK40 spindle taper. Good, operational condition, can be demonstrated under power by arrangement. Iasdpod Id N Rofx Aa Nsl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, 3-axis active digital readout (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel paths: X 300 / Y 160 / Z 340mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed rate: steplessly adjustable The machine is in well-maintained condition and can be inspected under power at the site. Includes extensive accessories: Iaedpfxjvnrz Rj Aa Nel - Machine vice - Operating manual / electrical schematic / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Kondisi: sangat baik (bekas), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-Axis Digital Readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed rate control: infinitely variable Rapid traverse X/Z axis: 1200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data subject to change! Features: For horizontal machining, the milling head is swivelled 90 degrees and pushed back. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Infinitely variable feed on X/Z axes The machine was partially overhauled by a specialist company a few years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Further accessories available on request! Condition: Good to very good from training facility Available from March 2026 Isdpfexyc N Eex Aa Noal

Kondisi: baru, Tahun pembuatan: 2025, Bench Drill for Metal CORMAK Z7016A Vario – Precision Column Drill with Stepless Speed Adjustment The CORMAK Z7016 Vario bench drill is a compact and functional column drill for metal, designed for precise drilling operations in professional and workshop environments. Thanks to stepless speed regulation, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key features Stepless speed adjustment – range 440–2600 rpm for optimal adaptation to the workpiece material. Robust cast iron construction – provides high rigidity and reduces vibration during operation. Worktable with height and angle adjustment – tiltable from -45° to +45°, and features rack-and-pinion height adjustment. Laser indicator and LED lighting – guarantee maximum drilling precision and operator comfort. Electronic speed display – allows real-time parameter monitoring. 65 mm vise included – ready to work straight out of the box. Design and technology Isdpfx Aaoxbzuvj Njal The Z7016A Vario bench drill is built on a sturdy 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, while the 60 mm spindle travel enables deep hole machining. The total machine height is only 870 mm, making it an extremely ergonomic and mobile unit. Precision and performance With a motor power of 500 W (S1) and 650 W (S6), the CORMAK Z7016A Vario column drill enables effective drilling in metal up to a diameter of 16 mm. No need for changing gears thanks to the smooth speed adjustment, significantly reducing machine setup time. The ergonomic three-arm feed lever, depth indicator, and spindle guidance ensure high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: locksmith and repair workshops maintenance departments technical schools small production lines and prototyping workshops Standard equipment 65 mm vise Laser drilling indicator Work area LED lighting Electronic speed display Three-arm feed lever Tilting table with rack and pinion height adjustment Technical data Parameter Value Max drilling diameter 16 mm Spindle speed range 440–2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle to column distance 125 mm Spindle to base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1/S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Kondisi: diremaj di bengkel (bekas), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication system Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Iedpfsxpwfgex Aa Nsal Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measurement path 150 mm) Parallelism deviation X axis: 0.002 mm (measurement path 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital readout overhauled - Wiper set installed - LEDs on active display replaced - Oil change - Vertical milling head newly bearing-mounted - Oil sight glass replaced Price: net, ex stock, loaded