Mesin penggerinda sabuk

DelNegro AS 90

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control Laedpfx Asd Iin Heateb - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: baik (bekas), Tahun pembuatan: 2008, Sawing capacity round: 115 mm Max. saw blade diameter: 350 mm Sawing capacity rectangular: 200 x 70 mm Sawing capacity square: 105 x 105 mm Sawing unit power: 6.5/8 kW Speed on sawing shaft: 1700/3400 rpm Maximum feed length: 9999 mm Shortest feed length: 10 mm Weight: 2300 kg Equipment: Lodpfx Aaerz Rw Rjtoab BEHRINGER SPS control Micro lubrication system Controlled zero point Cutting gap extension Machine light Vertical main clamping Non-return device Extraction system prepared (Keller extraction unit not included) Roller conveyor infeed approx. 5000 mm, self-made

Kondisi: bekas, Räummaschine Ljdpet Hr Dfjfx Aateab

Kondisi: baik (bekas), Tahun pembuatan: 2002, 1 x horizontal machining center Mori Seiki SH 403 Year of manufacture: 2002 Ljdpfswyw Tuox Aateab Control: Fanuc MGS 501 with chip conveyor High-pressure pump 50 bar Technical data: Travel paths: X:560 Y:510 Z:510 mm Rapid traverse X/Y/Z: 42,000 mm/min Max. spindle speed: 12,000 rpm Spindle taper: ISO 40 Tool changer: 40 positions Pallet size: 400 x 400 mm Number of pallets: 2 Table indexing: 1° Further photos to follow. The machine can be inspected under power while in operation.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Max. bar diameter 65 mm Ljdpfx Aein Hkmjatsab Max. bar length 3000 mm

Kondisi: baru, Number of drawers: 6 pcs. Dimensions (L x W x H): 720 x 580 x 800 mm Net weight: 100 kg Load capacity: 100 kg per drawer Lajdpfx Aasvblibotsb Robust tool cabinet with 6 lockable drawers. Drawer heights: 2 x 75 mm, 4 x 100 mm, 1 x 150 mm, and 1 x 200 mm Usable internal dimensions: 620 x 450 mm Maximum load per drawer: 100 kg! Fitted interior: - 32 boxes, 75 x 75 mm - 16 boxes, 75 x 150 mm - 8 boxes, 150 x 150 mm - 12 long dividers - 32 short dividers - 1 stacking plate

Kondisi: bekas, Tahun pembuatan: 2005,

Kondisi: bekas, Lokasi gudang: Nattheim Lodpfx Aasvvkrdsteab

Kondisi: bekas, jenis bahan bakar: listrik, bahan bakar: listrik, Spijkstaal wagon    • Sepenuhnya elektrik    • Termasuk nomor registrasi    • Termasuk pengisi daya baterai    • Kecepatan maksimum 18 km/jam Ljdpfx Aaex S Np Ejteab    • Siap pakai langsung dari kerja Kondisi: Bekas

Kondisi: bekas, Tahun pembuatan: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Laedot Hw D Repfx Aatob Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic hobbing machines for worm gears Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. gear diameter without loading magazine approx. 80 mm Max. gear diameter with loading magazine approx. 50 mm Module max. 2 / 2.5 Axial milling length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter diameter 24 – 50/63 mm Max. radial travel of milling slide 0–14/18 mm Max. cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed range, stepless 0.05 – 4.0 mm/rev Radial feed range, stepless 0.2 – 200 mm/min Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic workflow and minimal idle times thanks to freely programmable SIEMENS S5 PLC control for all processing steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, optional shifting, etc., and with part counter, program numbering, and 30-stage numerical fault display. Pneumatic workpiece loading and unloading device aligned parallel to the workpiece axis for shaft-type parts approx. 140 mm long x 8 mm diameter, with pneumatic double gripper for feeding and removing workpieces; blanks are loaded externally in exchange cassettes and inserted into the loading unit. The double gripper places the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet, clamping them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electronically monitored and controlled. The entire loading device is enclosed in Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration (powered), Machine is set up for hobbing worm shafts/armature shafts used in variable transmission drives for vehicle seats, window winders, etc.