Mesin cetak injeksi

Demag Ergotech Extra 35-80

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering Iedpfjthd Shox Ag Rotd - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 14.500 h, Fungsionalitas: berfungsi sepenuhnya, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar distance: 420 x 420 mm Mould height min. / max.: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Itedeu E E Suspfx Ag Rsd Max. shot volume: 154 cm³ Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 x core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year of manufacture: 2010 - Conveyor belt - Safety fence

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Arburg Allrounder 420C 1000-350/150 Arburg Two-component injection moulding machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can also offer on-site commissioning to guarantee functionality. Extras include: Rotary platen, Geiger Robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic Itjdpfxop Audqj Ag Rjd SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR Vertical / 2120 BAR Horizontal INJECTION VOLUME: Horizontal 182cm³ INJECTION VOLUME: Vertical 54cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOLD HEIGHT: 250 mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Itodpfx Agjg Ey Ufs Rjd Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Max. air flow: 840 m³/h Connection diameter: 200 mm Isdpowmlgcofx Ag Rstd Drive power: 0.55 kW Very little used, 2 units available.

Kondisi: baru, Tahun pembuatan: 2025, General: - Maximum temperature range: 150°C for oil (heat carrier fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Qmax. 60 l/min – Pmax. 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level indicator - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and control system: - Electronic PCB control - Solid state relay - Safety thermostat - Sensor breakage monitoring - Connection cable with plug Itsdsddv Itopfx Ag Red Available in approx. 4 weeks!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Vi har nu 13 SSI Schaefer SLL LogiMat vertikala lyftmoduler från 2019 tillgängliga för försäljning. Dessa maskiner är i mycket gott skick och har servats varje år av tillverkaren sedan installationen. Tack vare regelbunden service och varsam användning är maskinerna fortfarande mycket driftsäkra. Dessa vertikala lyftmoduler är konstruerade för att ge maximal lagring på minimal yta. Brickmått: 4 025 mm bred × 815 mm djup Brickyta: Cirka 3,3 m² Antal brickor per maskin: Cirka 49 Total lagringsyta per maskin: Cirka 160 m² Utnyttjad golvyta per maskin: Endast 14,12 m² Varje maskin är utrustad med en valbar ljuspekare som visar exakt var plockning ska ske. Detta gör plockprocessen både snabbare och säkrare. För att använda ljuspekaren måste maskinen vara ansluten till ett ERP- eller WMS-system. Maskinerna har endast gått cirka 30 000 till 60 000 cykler vardera – motsvarande ca 1 till 2 års normal användning. Maskinernas höjd är 8 200 mm men kan anpassas efter lagrets takhöjd vid installation. Specifikationer – SSI Schäfer LogiMat SLL Vertikal Lyftmodul Tillverkare: SSI Schäfer Modell: LogiMat SLL 4025-815-8200/400 Tillverkningsår: 2019 Skick: Mycket gott – årligen servad av tillverkaren Antal tillgängliga enheter: 13 Itodpfx Agowi Iyws Red Höjd: 8 200 mm Bredd (Maskin/Bricka): 4 570 mm / 4 025 mm Djup (Maskin/Bricka): 3 092 mm / 815 mm Utnyttjad golvyta per enhet: 14,12 m² Antal brickor per enhet: ca 49

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 33.108 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, diameter sekrup: 25 mm, volume langkah: 79 cm³, tekanan injeksi: 2.398 batang, gaya ejektor: 6.100 N, lintasan ejektor: 100 mm, langkah pembukaan: 606 mm, panjang pelat: 750 mm, lebar pelat: 850 mm, berat keseluruhan: 10.600 kg, Perlengkapan: dokumentasi / manual, Detail Teknis Pabrikan: Engel Model: V 330H/80V/130 Combi Cleanroom Ijdpfx Ajt A Ui Aog Rjtd Tahun Pembuatan: 2006 Jam Operasi: 33.107 jam Diameter sekrup: 25/22 mm Berat mesin: 10.600 kg Perlengkapan tambahan termasuk: Robot GEKU SR 500 ST Kandang pelindung Meja putar Mesin telah berjalan hampir 33.107 jam dalam mode otomatis.

Tahun pembuatan: 2022, Kondisi: baru, - Discharge: 500 mm - Incline conveyor: 1300 mm - Feed: 600 mm - Usable width: 350 mm / Overall width: 405 mm - Discharge height: min. 700 mm, max. 1000 mm - Cleats: 30 mm high (for usable widths of 350 mm, the cleats are split in the center) - Cleat spacing: 500 mm Itedpfjf U Eu Hjx Ag Rsd Available on request: - Special dimensions - Cycle control - Frequency converter

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Arburg injection moulding machine, year 2000. 130 tonnes clamping force. The machine is delivered fully refurbished at our facilities in Heras (Cantabria). New seals in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660x840 mm Itodpfx Agjrxtpde Red OPENING STROKE: 575 mm MAX. DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420x420 / 470x470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar