Magnet pengangkat Magnet pelat Overband

die magnetprofis

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminium angle conveyor belt including mobile subframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at the bend: 40 degrees each Feed height (measured from floor): 500 mm Discharge height: 1,600 mm Belt width: 700 mm Extremely robust aluminium construction; heavy-duty design! PU conveyor belt incl. cleats and wave edge Drive: 0.55 kW motor (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional Wave edge: 80x50 mm T-60 cleats, short pitch 2-ply, particularly cross-stable Rjdpeyt Ia Dofx Alaet Wave edges and cleats as well as belt seamlessly high-frequency welded At the angled section, the belt is guided on both sides with 4 hold-down rollers each. The belt is manufactured with a 100 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 400 mm; calculation as follows: (top view) transverse layout 100+50+400+50+100 mm Demo unit - Available immediately! - Can be inspected under power All prices are net plus 19% VAT All information without guarantee, only while stocks last!

Kondisi: baik (bekas), Gardner 800l Bandmischer 800l Bandmischer, einschüssig, mit Edelstahl-Innenausstattung, Klappdeckel, Auslauftrichter, 3-phasig Rsdpfx Aolcdz Hjlajt

Tahun pembuatan: 2025, jam operasional: 5 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025112701, Aluminum incline conveyor belt with substructure including leveling feet and machine feet for compensation of uneven floors - Infeed height: 500 mm - Inclined section: 3,000 mm - Discharge height: 2,000 mm Design: Aluminum frame construction - Triple-reinforced profile 135x45 mm - Full-surface discharge plate 2.0 mm, galvanized Drive roller + return roller: S235 steel, welded and machined Ø150x620 mm crowned and finish-turned, shaft mounted with pillow block bearings. Drive: flange-mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped splice Belt material: 2-ply, especially cross-rigid Rjdpfxoydb Rws Alaet 2 pcs. wave edge, 80 mm high, 50 mm wide, high-frequency welded flush with the edge 18 pcs. T60 cleats, 430 mm long, spacing approx. 508 mm, welded centrally Belt material: 2-ply, especially cross-rigid Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, as follows: (top view) transverse arrangement 50+500+50 mm

Kondisi: baru, Tahun pembuatan: 2026, Aluminium incline conveyor with substructure (PU/PVC with cleats & wave edges) We offer a robust incline conveyor in aluminium construction design for the reliable transport of piece goods and bulk materials – ideal for industry, crafts, recycling, wood processing and much more. Thanks to the combination of cleats and wave edges, safe material handling is ensured even on steep conveying angles. _____ Technical Data (Sample Configuration): ✔ Feed height: individually adjustable ✔ Inclined section: lengths freely selectable ✔ Discharge height: individually adjustable Rsdeyhzpljpfx Alaet ✔ Substructure incl. adjustable machine feet or transport rollers → for compensating floor unevenness / ensuring secure placement _____ Design / Frame: ✔ Aluminium construction design ✔ 2-profile 90x45mm or heavy-duty 3-profile 135×45mm ✔ Full-surface discharge plate 2.0 mm galvanized or 1.4301 stainless steel _____ Rollers / Drive: ✔ Drive roller + return roller made of S235 steel, welded and machined ✔ Ø100, 150 or 220 mm ✔ Shafts mounted in tension bearings ✔ Drive: Shaft-mounted gear motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection 230/400V, 50Hz, protection class IP54 (standard) ✔ Drive pre-wired to motor terminal box ➡️ Commissioning by qualified electrician required _____ Conveyor Belt / Carriers: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt width: 100, 200, 300, 400, 500, 600, 700, 800, 900 or even 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply for special cross stability ✔ Wave edges: up to 80 mm high ✔ Cleats: individually adjustable ✔ Spacing freely selectable _____ Options / Accessories available: ✔ Infeed chutes ✔ Hoppers / feed hoppers ✔ Storage bunkers ✔ Discharge hoppers ✔ Special lengths / widths ✔ Cleats & wave edges as requested _____ ✔ Custom manufacturing to customer specification ✔ Industrial quality "Made in Germany" Dimensions, configuration & pricing on request Just send us a short message – we provide quick & straightforward advice. Discover tailor-made solutions for your industry! As an innovative engineering company, we are proud to offer custom solutions for the recycling, food, and processing industries. Our extensive product portfolio covers everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-conveyors. Furthermore, we manufacture feed bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all tailored to the specific requirements of our customers. We understand that every industry and every project is unique. That's why we customise our solutions to your needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, nothing is a special order – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into tailor-made solutions. Together, we’ll shape the future of your production processes!

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Rjdpevprv Rofx Alast Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Tahun pembuatan: 2026, Kondisi: baru, Robust steel construction – engineered for continuous operation The base frame is manufactured from a durable structural steel construction, utilizing laser-cut, press-braked, and welded components. The surface is finished with a high-quality powder coating in RAL0208. Modular design: Our conveyor belt frames are available as transportable segments. This ensures the system is: - Easy to transport and assemble - Extendable or reducible at any time - Ideally suited for future modifications or system adaptations Conveyor technology & support rollers The lower belt support roller design ensures smooth and reliable operation: - Shaft diameter: 60/15 mm - Roller station pitch: approx. 500 mm (customizable) - In the loading zone, a narrower roller spacing is available for increased load capacity Drive & rollers Both the drive and return pulleys are made from S235 steel, welded and precisely machined: - Ø 220 × 700 mm, crowned finish - Shaft fixed with tension bearings - Bearing points equipped with robust UCF flange bearings including grease fittings Drive unit: - Hydromec worm gear motor 1.1 kW - Belt speed: approx. 1.15 m/s - Connection: 400V / 50 Hz, protection class IP54 Redpoyhznnefx Alast - Drive prewired to motor terminal box (commissioning must be performed by a qualified electrician) - Motor mounted pulling on the right side in conveying direction Conveyor belt A durable, industry-grade belt is used: - DM EP250/2, 3+1.5 cover - Chevron profile, 17 mm high, 650 mm wide - Plain splice area - Endless hot vulcanized Custom options & accessories (as required) Thanks to the modular design, all components can be tailored precisely to your process requirements, for example: ✅ Special lengths & widths ✅ Side plates / corrugated edges (for lateral guidance and improved conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean feeding of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt qualities ✅ Adjusted roller spacing & support roller geometry ✅ Special coatings / customer-specific execution

Tahun pembuatan: 2026, Kondisi: baru, DM flat belt conveyor type FB-700 without substructure for transporting bulk materials Conveyor belt length: 6,000 mm Belt width: 650 mm Welded construction made of structural steel, laser-cut and bent Base structure powder-coated in RAL 5015 Modular conveyor frame construction / sections available in transportable lengths. Frame can be extended or shortened at any time. Carrier roller construction in the return run, shaft Ø60/15mm Roller station pitch approx. 500mm (customizable) Closer roller pitch in the loading area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700mm, crowned, shaft mounted in plummer block bearings. Drive: Hydromec 1.1 kW helical gear motor, belt speed 1.15 m/sec Connection: 400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) Motor mounted on the right, pulling configuration in direction of belt travel. Bearing points equipped with robust UCF flange bearings and lubrication points. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17mm high x 650mm wide Splice area without profile, endless hot vulcanized Rsdpfsyhznhsx Alajt

Tahun pembuatan: 2021, Kondisi: baru, Overband plate magnet from remaining stock / overproduction Design in VA 1.4301, tightly sealed For sale is a plate magnet with threaded holes on the rear side. The magnet can be mounted either as a "police magnet" or for removing metal contaminants above a conveyor belt. Lifting rings for suspension are included. Redpfx Alefktk Hsaet Dimensions of the magnet block: 620 x 420 x 250 mm Only 1 unit available for immediate delivery. Many other sizes available from stock.

Kondisi: baru, Tahun pembuatan: 2026, Aluminium angle conveyor belt with substructure including adjustable levelling feet and machine feet for compensating uneven floors Horizontal section: 2,500 mm Inclined section: 6,000 mm Angle at the bend: 45° Height of horizontal section: 350 mm Total conveyor belt length (measured on floor): 6,750 mm Discharge height at end of conveyor: 4,500 mm Specification: Aluminium modular construction - Double-reinforced profile, 90 x 45 mm - Full-surface discharge plate, 2.0 mm, galvanised Drive drum & return drum made of S235 steel, welded and machined Ø100 x 620 mm crowned & turned, shaft fixed with bearing units. Drive: Shaft-mounted geared motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive pre-wired to motor terminal box (Commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. wave edge, PU petrol matt Belt width: 600 mm Rsdpfxsyhzhze Alaot 2 pcs wave edge, 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, particularly cross-stable At the bend area, the belt is guided on both sides by three hold-down rollers each. Belt has a 70 mm edge-free zone on each side. Due to the wave edges on each side, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) crosswise: 70+25+5+400+5+25+70 mm Special features: Belt guided by PVC wedge strip on running surface profile - 10 x 6 mm - Including widened substructure for head load stability - Including cutout in discharge plate - Including slide strips in drive and return drum - Including magnet-free zone for overband magnetic separator - Including bracket for DMPM1200, in inclined section Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to provide custom solutions for the recycling, food, and further processing industries. Our extensive product portfolio covers everything from conveyor belt systems, flat conveyors, inclined conveyors and angle conveyors to Z-shaped conveyor belts. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators and dosing bunkers – all according to specific customer requirements. We understand that every industry and project is unique. That is why we tailor our solutions individually to your wishes and requirements. Complex projects present an exciting challenge for us—and we look forward to developing innovative solutions together with you. With us, there are no special-order exceptions—for every problem, we find the right solution! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grates, magnetic grid, metal separator, block magnet, filtration systems, dosing bunker, feed bunker, filling systems

Kondisi: baru, Tahun pembuatan: 2026, Aluminum angled conveyor belt with substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Incline angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum modular construction - Reinforced triple profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + return drum S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with tension bearings Drive: Shaft-mounted geared motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400 V, 50 Hz, protection rating IP54 Drive prewired up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 15/4 0+007 PVC incl. wave edge PVC, green Belt width: 800 mm Rsdpfxeyhzhuj Alajt 2 pcs. wave edges 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, highly cross-stable In the angled section, the belt is guided on both sides by 3 hold-down rollers each The belt is supplied with a 70 mm border-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (Top view) Cross-section 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio covers everything from conveyor systems and flat belt conveyors to inclined conveyors, angle conveyors, and Z-shaped belt conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all designed according to our customers' specific requirements. We understand that every industry and every project is unique. That's why we tailor our solutions to your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, everything is customized – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into tailored solutions. Together, we shape the future of your production processes! conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling plants

Tahun pembuatan: 2018, Kondisi: baru, Load capacity: max. 1,000 kg. Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Rsdpedx Ryyefx Alaot Coil height: max. 800 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Aluminium Z-conveyor with substructure incl. adjustable feet and freely swiveling transport castors with parking brake Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Rsdpjyhzhnofx Alaet Angle of inclination at each bend: 60° Total conveyor length (measured on the floor): 3,500 mm Height of horizontal section: 400 mm Specification/Design: - Aluminum modular construction - Double-reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized Drive roller + return roller: S235 steel, welded and machined Ø100x720 mm, crowned and turned, shaft fixed with pillow block bearings Drive: Coupled gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge, petrol (matte) PU, AS, highly cross-stable with hard cover Belt width: 700 mm 2 pcs wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs T40 cleats centered, 430 mm long, pitch approx. 299 mm Belt material: 2-ply, extra cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm border-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Crosswise arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - incl. recess in the discharge sheet - incl. sliding grooves in the drive and return rollers

Kondisi: baru, Tahun pembuatan: 2026, Aluminum incline conveyor belt with subframe includes adjustable feet and machine leveling feet for compensation of uneven surfaces - Infeed height: 500 mm - Inclined section: 2,000 mm Redpfsyhzhbsx Alast - Discharge height: 1,200 mm Design: Aluminum structural construction - Reinforced 3-profile design, 135 x 45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive roller + return roller made of S235 steel, welded and machined Ø150 x 620 mm, cylindrical finish, shaft mounted with pillow block bearings Drive: Attached gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400 V, 50 Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped splice Belt material: 2-ply, extra transverse stability 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded flush to the edge 14 pcs. cleats T60, 400 mm long, pitch approx. 296 mm, centrically welded on Belt material: 2-ply, extra transverse stability Due to wave edges on both sides, the usable belt width is reduced: Usable width 500 mm, as follows: (Top view) Across: 50+500+50 mm

Tahun pembuatan: 2015, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 2015020890, For sale is a magnetic filtration system with an automatic cleaning mechanism. Filtration systems of this type are typically manufactured only upon individual customer request. This particular unit was used for demonstration purposes only and has seen minimal actual operation. Product advantages - Can be integrated into existing production lines - Separation of all ferrous metal contaminants - Highly corrosion-resistant - Highly wear-resistant - Compact design - Low maintenance Technical details - Dimensions: 400 x 400 x 390 mm - Inlet: 260 x 260 mm - Outlet: 260 x 260 mm - 8 magnetic filter rods Redpfx Alecwghbjaet

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We kindly invite you to visit our technical center to personally experience the quality and functionality of our equipment. Material Shredder 45 kW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shutdown in idle mode - Hydraulic pusher equipped with pressure plates - Siemens PLC control system - Optional: control cabinet extension for discharge conveyor belt + overband magnet separator Complete solution with discharge conveyor in any desired configuration. Our core competence is providing our customers with exactly what they need. We work together with our customers to develop tailored, application-specific solutions and supply systems produced in-house. Feel free to contact us by phone to find the right solution for your requirements. Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT. Rsdov Tdq Ispfx Alast All information provided without guarantee, while stocks last!