Konveyor sabuk datar yang sesuai dengan makanan FDA

die magnetrofis GmbH & Co. KG Flachförderband FDA

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW Fgslhcox Ap Hpodw Eob -45ºC/+40ºC: 86,0 kW

Kondisi: bekas, Tahun pembuatan: 1986, en-GB Felhcdsu Dimyjw Esgb

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas),

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KPP400, de Folhjt A Ampscdw Eogb

Tahun pembuatan: 2025, Kondisi: baru, ProdMa Sp. z o.o. specializes in stainless steel processing and configures stainless steel machines according to the requirements and capacities of the customer. Efficiency, high productivity, and good communication with the customer are our top priorities. Accordingly, we orient ourselves to existing machines on the market, analyze and optimize problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Fgolhcdworci U Hs Ejb Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Power supply: 50 Hz 360 V Power consumption: 1.64 kW Air consumption: 1 m³/10 bar/1 min Peeling capacity: 40–80 pieces/min Peeling diameter: 35–100 mm ungraded onions

Kondisi: baru, Rated capacity up to 2000 kg/h Motor power 1.5 (2.0) kW (HP) Electrical connection 400V 50Hz (3 phase) Electrical fuse protection 16 A Length 1600 mm Width 700 mm Height 2100 / 2350 mm Feed height 800 mm Weight 200 kg Material 1.4301 / AISI 304 Fgelob I Ubwshcdw Eob Cleaning connection ½" internal thread Washing tank connection 2" external thread Fruit discharge height 1545 mm

Kondisi: sangat baik (bekas), 001 Felhcdwsi E Hnyo Esgb

Tahun pembuatan: 2021, Kondisi: baru, Aluminum angle conveyor belt incl. mobile substructure Horizontal section: 1500 mm (customizable) Inclined section: 2500 mm (customizable) Angle at the bend freely selectable: 30°, 35°, 40°, or 45° Polyamide swivel castors with parking brakes Conveyor belt width: 400 mm (customizable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt incl. cleats and corrugated sidewall Drive: Motor 0.25 kW (customizable), speed 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for leveling Corrugated sidewall: 40x35 mm (customizable) Felhehh A Uqscdw Eogb T-20 cleats - 400 mm spacing (customizable) 2-ply, particularly cross-stable Our core competence is to deliver exactly what the customer really needs. We work together with our customers to develop customized, individual solutions and supply the relevant systems from our own production. Please feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Fslhcjx Diqwodw Esgb Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Tahun pembuatan: 2026, Kondisi: baru, BEFARD XP602 vacuum suction lifter for glass installation • Maximum load capacity: 600 kg • 8 suction cups • Dual-speed vacuum system • Vacuum release valve • Battery powered • Manual 360-degree rotation Fgelhcdweiauz Ne Eob • Lockable at every 90-degree increment • Fully adjustable vertically and horizontally Additional options: • HS spacer • Spare battery • Transport trolley • Mesh box pallet Other models available: gripping devices with load capacities of 300 kg, 450 kg, 800 kg, 900 kg, and 1000 kg Available in the color of your choice