Garis sambungan jari

DIMTER HK 800 K/S/N

Kondisi: sangat baik (bekas), Frezing spindle bawah SCM T150 Diameter spindle: 35 mm Godpfx Ahow Ral Hebeiw Panjang total spindle: 180 mm Pengangkatan spindle listrik Gerakan pagar listrik Sudut dapat diatur secara elektrik -10/45° Kecepatan spindle variabel: 3000-4500-6000–7000-10000 rpm Motor berkekuatan 5,5 kW Dokumentasi teknis DTR

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Gjdpfx Ahev Si Szjbsiw Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Gijdpfx Asfi Tg Hshbew Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, ketinggian potong (maks.): 1.200 mm, lebar pemotongan (maks.): 1.200 mm, panjang pemotongan (maks.): 6.000 mm, daya motor spindle: 5.000 W, meja tetap, kepala bergerak rantai dengan gerakan vertikal diagonal pemotongan otomatis Giodpfx Ahoyzrcmsbjw sabuk pemulihan limbah

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Söderhamn liten stocklinje med Euromill-profiler Barkmaskin Cambio 45 med inmatning och styrverk därefter 2D-skanner Söderhamn 447 inmatning 240-12 kantspånshyvlar Blocktilt och inmatning Gsdpfxewp E E De Ahbsiw 240-12 kantspånshyvel Euromill-profiler Brädavskiljare med justerbart centrum Spåntransportör under såglinjen Hydraulaggregat och elskåp.

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Giedpfx Ahju Agh Sobow Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: baik (bekas), Tahun pembuatan: 2003, Automatic hydraulic press for gluing Kallesoe Type LV 7821 – the press is used for bonding wooden components, e.g., tabletops, with maximum dimensions of 7800 mm x 2100 mm. The glue curing process is accelerated by hot water supplied to the press platen, circulating continuously (it can be supplied from central heating or heated via integrated heating elements on the press). Press heating power: 72 kW Giedsrqzgkopfx Ahbjw Maximum press capacity: up to 2000 m2 / 7.5 hours Kallesoe Type KL40 glue spreader with loader – designed for the automatic application of adhesive to each lamella and direct feed to the LV7821 press.

Kondisi: baru, Tahun pembuatan: 2025, panjang total: 1.600 mm, lebar total: 2.200 mm, tinggi total: 2.350 mm, berat keseluruhan: 250 kg, jenis arus masuk: tiga fasa, lebar kerja: 1.400 mm, Paint booth, spray wall, extraction unit TQN1414 With right- or left-side exhaust. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power 1.5 kW • Capacity 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency of 99.9% • IP 66 control panel • Automatic filter cleaning • Hermetic lighting, IP 65 • Paint tank Gsdpfxod S N I No Ahbsiw Booth available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machinery among those offered on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand are EC-certified. We offer our own transport – prices are specified for each individual offer. We issue invoices with VAT shown separately. Short delivery times! Possibility to order machines in various, customised configurations and dimensions! Please contact us.

Tahun pembuatan: 1999, Kondisi: baik (bekas),

Kondisi: bekas, Adhesive application Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor Godpfxjcht Nys Ahbeiw - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories