LOADER (BRIDGE-FRAME) PILIHAN GANDA

MEINERT (IMA Group) P 416 (D/B 3000/1300) Concept

Kondisi: bekas, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. Lodpfx Aozhnafehrjru - Clamping of elements via 9 system clamping beams with pneumatic cylinders. The clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg / 4,200 N at 10 bar operating pressure. The clamping system can be operated in two groups (5 and 4 beams), allowing two elements to be clamped/processed simultaneously. - Working surface sheathed with timber panels as far as technically possible. (Optionally available: perforated metal plate as shown in the photo) - Stop system at the bottom with 9 locating pins and at the side with 7 locating pins for precise element positioning. - Tilting device for the assembly station with 3 hydraulic cylinders for element weights of up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also protected and installed underneath the assembly station. - Operation of the functions is performed via a pendant control. - At both ends of the station, one compressed air connection and one socket are installed; on the longitudinal side of the station, there are two sockets and two compressed air connections for connecting hand tools. - The stations are modular in design, allowing them to be expanded immediately or at a later date with a receiver station to form a complete tilting station. A tilting station can be seen in picture 3. - Further options: assembly table without tilting function, perforated metal plates, other working dimensions on request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of clamping cylinders: 320 mm - Locating pin height: 120 mm - Working height: approx. 700 mm - Colour RAL 7035 light grey

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Lsdpfxeu I R Utj Ahroru Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, Mesin Pengupas Kulit Balz BG 90 6W-GR Tahun produksi: 2001 Diremaj total pada tahun 2022 dan belum dipasang kembali setelahnya Diameter minimal: 14 cm Diameter maksimal: 90 cm Lrjdpfxoy Iabde Ahrou Dengan sistem konveyor untuk pemasukan dan pengeluaran material Tersedia segera - telah diremaj total Lokasi: Austria, dekat Linz

Kondisi: baik (bekas), Tahun pembuatan: 2004, Saya menjual mesin pembuatan alur lidah dan alur ekor semi-otomatis GreCon Profijoint PJ7/6100-LI. Tahun pembuatan 2004. Panjang input 100-1.000 mm Lebar kayu 40-150 mm / lebar 510 mm dalam 1 putaran Ketebalan kayu 20-50 mm Mesin pembuatan alur lidah dan alur ekor otomatis dengan injeksi perekat pada 1 sisi Pemutaran material secara otomatis untuk putaran ke-2 pada meja putar Lrsdpfx Ahsmig Tderju Pengumpanan otomatis ke dalam mesin pengepres Mesin pengepres 3,00 - 6,10 m dengan siklus otomatis dan gergaji pemotong akhir. Luas total 10,50 x 3,50 m Konstruksi yang stabil dan kuat. Kondisi sangat baik. Tersedia segera.

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, frekuensi input: 50 Hz, Mesin penghancur/penggiling Vecoplan VHZ 1300, Hammermill CPM, kipas dan filter siklon JFK. Mesin dalam kondisi baik, hanya digunakan sekitar 500 jam. Jalur produksi lengkap dengan semua konveyor. Lodpsympx Usfx Ahrjru

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Mesin pembuat alur parket Costa Righi model Zefiro 2200 Jarak maksimum antara pisau luar: 2200 mm Pembukaan kerja efektif: 2400 mm Termasuk pengumpan sabuk dan rantai masuk Ljdpfsx Rrqvex Ahrjru Pisau termasuk

Kondisi: baru, Tahun pembuatan: 2024, SCHORR Ride-On Sweeper Electric Sweeper Street Sweeper Floor Cleaner Powerful and quiet-running sweeper for both indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for floor cleaning. Its ergonomic seat and intuitive controls allow effortless operation, even over extended periods. The powerful motor ensures thorough cleaning even under demanding conditions. With a spacious 80-liter debris container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a stress-free and pleasant task. The standard LED work lights make working in darker areas easier. With an output of 1920 watts from 48V, the sweeper is equipped with ample power to allow continuous use for over 4 hours. Lredpfx Aeuac D Uohrsu SCHORR RR80KM Ride-On Sweeper – Discover the advantages: -- Fully electric ride-on sweeper with a working width of 1250mm – ideal for large indoor and outdoor surfaces -- 48V/1920W power rating -- 80-liter bagless rear debris container, easily extendable and emptyable -- High-performance system with 48V and 58Ah -- Optional spray nozzle to reduce dust generation -- Extremely easy operation -- Outstanding maneuverability Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer model: RR80KM Drive: ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Net weight: 400kg Main dimensions Debris container volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Overall length: 1600mm Overall height: 1300mm Overall width: 1250mm Sweeper width (without brushes): approx. 80cm *Further technical data available upon request. The chassis is made entirely from flexible, robust plastic, minimizing potential damage to walls, for example. Apart from the side brushes, no part extends beyond the bodywork, allowing you to work as close as possible to objects. The debris container is made from solid steel and is conveniently removable from the rear of the machine. Sensitive components such as the front headlights are protected by a metal bumper. Overall, the machine is ideally equipped for most application areas. Naturally, we usually have all spare parts in stock and can deliver them quickly should you ever experience a problem. If you need technical support, we have the necessary expertise and can carry out repairs in our in-house workshop. Would you prefer to finance or lease the unit? No problem! We also offer attractive options for this. Just let us know, and we will advise you on the various possibilities. We look forward to your inquiry! Our SCHORR team is happy to answer any questions regarding our ride-on sweeper. You can reach our experienced staff by telephone or email. We look forward to hearing from you and assisting you in your decision.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Overhaul terkait proyek selesai pada 2020–2021. Awalnya dibangun pada 1991 dan sepenuhnya direkondisi oleh DL Packaging pada 2021. Kini tersedia kembali! Sejak direkondisi, mesin hanya beroperasi sekitar 150 jam – tersedia segera. Termasuk: Set pembentuk FS 110 untuk kantong tipe pillow, lebar 110 mm Set pembentuk FS 180 untuk kantong tipe pillow, lebar 180 mm Lodpfxjx Dapwe Ahreru Printer Markem X65 TTO Mesin dapat memproduksi kantong tipe pillow maupun kantong block-bottom. Termasuk SDX, printer, dan set pembentuk. Kapasitas: 50–80 kantong/menit, tergantung pada format kantong, ketebalan film, produk pengisian, sistem dosing, dan sinkronisasi. Waktu pengiriman: Sesuai permintaan. Jika Anda tertarik dengan mesin ini, akan dimodernisasi oleh DL Packaging sesuai produk dan kebutuhan spesifik Anda.

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line consists of: Unirex 3000 machining centre Lrodpfx Aheh H Iyxjrsu Univar 15 Unitex 15

Kondisi: baru, Tahun pembuatan: 2025, C3T model: Working area: 3048mm x 1524mm Laser output power: 6000W / 3000W / 2000W / 1500W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Ledpfxog D Nz Rj Ahreru Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double High-Speed Exchange Tables The fast exchange of two tables significantly increases efficiency. The chain-driven system offers greater rigidity and higher accuracy, saving feeding time. 2. Tenon-and-Mortise Welded Bed Frame Utilizes traditional Chinese tenon-and-mortise structure to enhance load-bearing capacity. Welded joints and the structural support ensure long-term operational stability. The welded frame improves vibration absorption, reducing deviations caused by impacts and enabling more precise cutting. 3. Dual Automatic Self-Centering Electric Chucks The dual electric chucks with automatic self-centering function are easy to operate and low-maintenance. The brand-new motor provides precise control. Independently developed modular chuck components can be quickly replaced. 4. Auto-Focus Laser Cutting Head By setting separate focal lengths for piercing and cutting, cutting precision is improved. Suitable for various focal lengths, with the focal position automatically adjusted according to the thickness of different sheets. 5. Extended Aluminum Beam Aerospace-grade material with increased rigidity greatly reduces beam deformation during high-speed operation, improving high-speed directional sensitivity and processing efficiency.