Pelontar dayung sabuk penyortir

DIMTER

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Optimizing crosscut saw from 2018. This WEINIG DIMTER Opticut S90 features a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking for a high-quality cutting machine, the WEINIG DIMTER Opticut S90, which we offer for sale, should be considered. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency inverter • Workpiece capacity • Input length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible wood curvature: max. 2 mm/m or 8 mm over the full length • Table incline: 10° • Movement and accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor output: 5.1 kW • Saw motor output: 7.5 kW • Total electrical power: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touchscreen • Screen resolution: 1366 x 768 pixels Iodpfoylmmmjx Ac Hjtc • Protection rating (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating parameters and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction port: diameter 125 mm • Required extraction capacity: velocity approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: Iodpfx Acjwclkyj Hstc - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Instalasi sambungan jari dimter HK 400 Instalasi finger-joint untuk paket kayu Panjang kayu masuk: 800 - 6000 mm Iedpfx Acsvi Hw Ne Hotc Tinggi frais: 285 mm (300 mm) Warna: biru Membutuhkan perbaikan, dijual dalam kondisi saat ini Instalasi sudah dibongkar dan kini berada di gudang di Achern Banyak material dengan harga murah Semua dokumen teknis tersedia Kami juga akan memberikan bantuan teknis dan menjawab semua pertanyaan Anda

Kondisi: bekas, Konveyor rol dengan 3 pengeluar pneumatik Panjang: 5,50 m Lebar rol: 300 mm Diameter rol: 100 mm Iedpfxsxtbt Nj Ac Hetc Tinggi kerja: 940 mm Gear motor SEW 1,5 kW

Kondisi: bekas, en-horizontal-impregnation-system-pro-flow-single-parts-with-flu shing-circuit-length-2700-mm-width-1100-mm-height-850-+-150-mm-mo tor-power-0.37-kw-electrical-power-0.5-kw-compressed-air-6-bar--- functional-features-machine-for-horizontal-flooding-of-individual -parts-product-is-dispensed-through-a-row-of-nozzles-excess-produ ct-is-blown-off-by-air-nozzles-the-pump-and-air-nozzles-are-autom atically-controlled-and-are-activated-only-when-the-workpiece-pas ses-through-this-reduces-compressed-air-consumption-the-circulati on-mode-ensures-minimal-product-usage---design-features-structure -sturdy-steel-frame-coated-with-high-strength-water-soluble-produ cts-machine-body-made-of-heat-sealed-thick-polypropylene-panels-f our-independent-chambers-for-infeed-impregnation-blow-off-and-out feed-horizontal-transport-of-workpieces-by-motor-driven-grooved-p lastic-rollers-frequency-inverter-for-speed-control-and-adjustmen t-transmission-exclusive-system-ensures-all-transmissions-are-arr anged-outside-the-impregnation-chamber-for-easy-access-this-allow s-for-longer-operating-times-and-eases-maintenance-tasks-movable- parts-are-protected-by-covers-and-appropriate-seals-circulation-p ump-pneumatic-double-diaphragm-pump-with-valves-seals-and-diaphra gms-made-of-nitrile-rubber-housing-made-of-pvdf-plastic-material- air-nozzles-first-chamber-features-a-blow-off-system-to-prevent-p roduct-leaks-a-second-blow-off-system-after-the-impregnation-cham ber-removes-excess-product-from-the-workpiece-electrical-control- panel-complies-with-ce-ip55-protection-includes-frequency-inverte r-to-adjust-the-conveying-speed-technical-data-length-mm-2700-wid th-mm-1100-conveying-speed-min-max-m-min-3-6-drive-motor-power-kw -0.37-installed-electrical-power-kw-0.5-distance-between-infeed-a nd-outfeed-rollers-mm-2520-working-height-adjustable-mm-850-+-150 -minimum-length-of-workpieces-to-impregnate-mm-250-maximum-width- of-workpieces-to-impregnate-mm-300-maximum-height-of-workpieces-t o-impregnate-mm-250-compressed-air-consumption-l-min-2000-require d-compressed-air-pressure-bar-6-equipment-and-included-accessorie s-flushing-circuit-for-pro-flow---price-of-the-above-mentioned-ma chine-on-request-plus-packaging-and-shipping---technical-data-as- stated-by-the-manufacturer-no-liability-illustrations-may-differ- from-the-original-prices-net-plus-vat-domestic-market) Iodpfx Aonl Nqqoc Hetc

Kondisi: perlu perbaikan (bekas),

Kondisi: bekas, Tahun pembuatan: 2004, OC700-20240625-1 Itjdpfxox Eblvs Ac Hjc

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Isdpfx Acom Habdj Hetc

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Iedpfswtgcxsx Ac Hstc Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: diremajakan ulang (bekas), DKV III throughfeed press with braking unit Completely overhauled Choice of original hydraulic motors or conversion to servo motors Options: - Chain threading - Synchronised cross-cut saw Function: For continuous pressing of finger joints without stopping (in throughfeed operation). The upper and lower plate chains generate the feed force. Downstream brake plates transfer the necessary longitudinal pressing force to the wood via friction. Advantages: - High output despite relatively slow feed rate - Absolutely no vertical misalignment of the finger joints Technology: Heavy-duty 2" plate chain, pneumatically raisable/lowerable Brake elements floating Pressing force measurement via contact gauge Height adjustment electrically operated Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10–70 m/min Drive power: Infeed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90–180 mm Wood thickness 20–80 mm Thickness - width ratio 6 : 10 Wood cross-section max. 90 cm² with 15/16.5 mm finger joint height. Itodpfjv T Aqyex Ac Hsc

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Ijdou Damdopfx Ac Hjtc

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1993, nomor mesin/kendaraan: 624/9, gaya penekanan: 10 t, tinggi kerja: 805 mm, panjang total: 1.900 mm, Mesin press taktis untuk sambungan jari ekor burung Mesin press sambungan jari ekor burung Gaya tekan 10 t Lebar kayu 80-300 mm Tebal kayu 18 - 80 mm OPSIONAL Iodpjt Sc T Iofx Ac Hotc dengan unit hidrolik

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1994, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6305/7, gaya penekanan: 15 t, tinggi kerja: 905 mm, panjang total: 1.900 mm, taktpresse-15t-dimter-linie Iodpfxog T Spao Ac Hotc

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), Two Vecoplan drag chain conveyors are available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, maximum incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, maximum incline: 70°, section length: 22 m. Documentation available. An on-site inspection is possible. Iodpfst Iw Rysx Ac Hstc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table of approximately 2500 x 1300 mm and a stable base frame. It is equipped with a motorized multifunction pusher and an automatic gluing station with a precision glue applicator head. The press is suitable for both softwood and hardwood, ensuring uniform pressure distribution and high vertical pressure for minimal offset. Contact us for further information regarding this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm Itsdpfx Acox D I Nrj Hec • Thicknesses: 11–60 mm • Input lengths: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Feed width per stroke: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: The maximum usable pressing width depends on the individual lamella widths • In multi-lane operation, filling widths can vary by max. 15 mm • Minimum contact area per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Pressing table and construction: • Pressing table area: approx. 2500 x 1300 mm • Sturdy base frame with lower pressing table made of stainless steel (polished electrode) • Upper pressure plate with hydraulic "Anti-Reb" motor for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure on the joint and compensate for tolerances • Quick-change stop rule sets for panel thicknesses 19–40 mm; hydraulically adjustable to current filling width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Rated electrical power for the press (without options): 7 kW • Rated electrical power for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and operator panel • Safety cover Additional equipment • Extended collecting table to 3700 x 1300 mm (with stainless steel wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue applicator head • Feed system for varying widths • Camera • Washing and rinsing unit for the glue head • Modem with software for online connectivity