Gergaji potong silang pengoptimalan

Dimter OptiCut 350-4 R

Timber dimensions to be processed:

Input lengths min/max: 500 - 6500 mm
Full optimization up to max. 1500 mm
Input widths min/max: 40 - 300 mm
Input thicknesses min/max: 15 - 120 mm
Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm
Duodpfx Asw Sy T Hsdgsl

Fixed lengths after saw, min./max.: 510 – 2800 mm

Special application:
Cutting blocks, length min/max: 100 – 200 mm
(Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes)

Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm
(for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m).

Thickness tolerance: +/- 3 mm
Curvature of timbers in any direction: max. 10 mm per meter length
Timber species: Softwood or hardwood

System performance:
Feed speed: steplessly adjustable up to max. 230 m/min
Cutting cycle: 0.6 – 1 sec
To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered.

Infeed height and saw: 900 mm
(To be mounted on customer-side platform, saw requires concrete base)
Sorting height: 2000 mm

Connection data:
Total electrical connected load: approx. 18 kW
Operating voltage: 380 Volt / 50 Hz
Maximum voltage fluctuation: 5 %
Compressed air consumption: approx. 1200 NL/min
Operating pressure: approx. 8 bar
Extraction speed: approx. 30 m/s
Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B

POSITION OVERVIEW:
Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge
Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading
Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings
Pos. 4: Automatic contactless width measurement
Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections
Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control
Processing capability:
- max. 16 product groups
- max. 8 grades per product group
- max. 200 fixed lengths per product group

Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm
Pos. 7: 2 ejectors mounted on the outfeed conveyor

Location: Nattheim

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.