CNC berjalan dengan beberapa unit
DMG MORI NLX 2500 SY 700

Name: DMG MORI NLX 2500 SY 700
Brand: DMG MORI
Availability: InStock

tahun pembuatan

2018

Kondisi

Bekas

Lokasi

Düsseldorf Jerman

CNC berjalan dengan beberapa unit DMG MORI NLX 2500 SY 700

Tampilkan peta

Data mesin

Nama mesin:: CNC berjalan dengan beberapa unit

pabrikan:: DMG MORI

Model:: NLX 2500 SY 700

tahun pembuatan:: 2018

Kondisi:: hampir baru (bekas)

fungsi:: berfungsi sepenuhnya

Jam operasional:: 23.501 h

Harga & Lokasi

Lokasi:: Fortuna Park, Flinger Broich 203, Halle 7-K, 40235 Düsseldorf, DE

Hubungi

Penjualan mesin

Apakah Anda sudah mengiklankan mesin bekas Anda? Jual melalui Machineseeker tanpa komisi.
Lebih lanjut tentang penjualan mesin

Rincian teknis

Diameter putar di atas sled silang:: 740 mm

Diameter pembubutan:: 920 mm

Daya motor spindle:: 18 W

Kecepatan spindel (maks.):: 4.000 rpm

Jarak pergerakan sumbu X:: 260 mm

Jarak lintasan sumbu Y:: 50 mm

Jarak gerak sumbu Z:: 795 mm

Panjang spindle milling:: 91 mm

Kecepatan rotasi (maks.):: 10.000 rpm

Tinggi total:: 2.395 mm

Panjang total:: 5.330 mm

Lebar total:: 4.100 mm

Diameter ayun di atas peluncur silang:: 740 mm

Hidung spindel:: JIS A2-8

Berat keseluruhan:: 8.360 kg

Rincian penawaran

ID iklan:: A19141431

Nomor referensi:: LAT0331

pembaruan:: terakhir pada 26.06.2025

Deskripsi

CNC Control: Mitsubishi M730UM (CELOS – ERGOline Touch)

Capabilities
X-axis travel mm: 260
Y-axis travel mm: ±50
Z-axis travel mm: 795
Turning length mm: 705
Max. turning diameter mm: Ø366
Turning diameter over bed mm: Ø920
Turning diameter over cross slide mm: 740
Bar capacity mm: 80

Tool Magazines
Number of tool stations: 20
Tool holder: BMT40

Upper Turret
Number of tool stations: 20
Max. speed driven tools rpm: 10,000
Driven tools output kW: 5.5/4.9/4.2 (3 min/5 min/continuous)
Y-axis travel mm: 100
Rapid traverse rate: 30
Crjdpfjwkf H Dex Adpsh

Main Spindle
Max. spindle speed rpm: 4,000
Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous)
Spindle bore mm: 91
Chuck type: Hollow chuck (Ø254 mm) BB210A821
Manufacturer: KITAGAWA
Spindle nose: JIS A2-8
Max. torque Nm: 49

Counter Spindle
Max. spindle speed rpm: 5,000
Spindle drive power kW: 11/7.5 (25%ED/continuous)
Spindle bore mm: 73
Chuck type: Hollow chuck (Ø210 mm) BB208A621
Manufacturer: KITAGAWA
Spindle nose: JIS A2-5
Max. torque Nm: 22
Counter spindle travel mm: 734

Cooling System
Tank capacity liters: 366

Equipment
Electronic handwheel
Chip conveyor
Signal light
High-pressure pump
Mist separator
Work area lamp
Dual foot switch for main and sub spindle
Coolant gun
Probe
Paper band filter
Preparation for robot operation

Robot Data - Fanuc - R-30iA / Type M-16iB/20
Availability of 10 pallets in warehouse (10 slots)
Clamping by robot: Ø40 to 220mm x Height 20mm
Max. workpiece weight for robot: 5.6kg

Machine Runtime:
Power on hours: 23,501
Rated power kVA: 48
Cutting time: 7,494

Base Machine: Dimensions / Weight
Length mm: 5,330
Width mm: 4,100
Height mm: 2,395
Weight kg: 8,360

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2015

27 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 231 9... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Mesin bubut CNC DMG MORI NLX 2500 SY/700

Aach

11.203 km

Mesin bubut CNC
DMG MORINLX 2500 SY/700

Hubungi

iklan kecil

Pusat pembubutan dan penggilingan CNC DMG MORI NLX 2500 SY / 700

Oelde

11.164 km

Pusat pembubutan dan penggilingan CNC
DMG MORINLX 2500 SY / 700

Hubungi

Kondisi: bekas, Tahun pembuatan: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Credpfxeu Hq Rle Adpsh Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter ( - ) mm Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Shank height for square tools: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range - driven tools: max. 10,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space required approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Lihat detail

iklan kecil

Jerman

12.681 km

Pusat pembubutan dan penggilingan CNC
DMG MORINLX 2500 SY / 700

Hubungi

iklan kecil

Pusat penggilingan balik CNC DMG MORI NLX2500 SY/700

Kirchheim am Ries

11.067 km

Pusat penggilingan balik CNC
DMG MORINLX2500 SY/700

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 10.665 h, nomor mesin/kendaraan: NL256171030, Steuerung M730 UM Mapps CELOS Max. turning diameter: 350 mm Turning length: 700 mm Csdpfswum Haex Adporh Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-travel: 260 mm Z-travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 20 positions Shank height for square tools: 25 mm Drill shank diameter: 50 mm Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Tool drive - C, Y axis

Lihat detail

iklan kecil

Oelde

11.164 km

Pusat pembubutan dan penggilingan CNC
DMG MORINLX 2500 SY / 700

Hubungi

Kondisi: bekas, Tahun pembuatan: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control system: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Counter-spindle speed range: 6,000 rpm Counter-spindle drive power: 11 / 7.5 kW Spindle bore (counter-spindle): 43 mm C-axis (counter-spindle): 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Drive power for driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Counter-spindle - Driven tool Codpfxsvy Ig Ho Adperh - C and Y axes

Lihat detail

iklan kecil

Oelde

11.164 km

Pusat pembubutan dan penggilingan CNC
DMG MORINLX 2500 SY / 700

Hubungi

Kondisi: bekas, Tahun pembuatan: 2014, Maximum turning diameter: 356 mm Turning length: 705 mm Control: 730 UM Celos Swing diameter over bed: 920 mm Swing diameter over cross slide: 740 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° Crodpfx Adjwd Txnjpsh X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Feed rate: 0 - 5,000 mm/min Number of tool stations: 12 positions Tool shank height for square tools: 25 mm Tool shank diameter for boring bars: 50 mm Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 3.7 kW Total connected load: 49 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - Y-axis - Only approx. 13,000 machining hours - Includes 4x driven tools - Includes 6x standard tool holders

Lihat detail

Beriklan di sini