Sistem filter

Donaldson Torit VS550

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Blodpfx Adot Hw Iij Ref Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: sangat baik (bekas), panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 300 mm,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 4.439 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 310 mm, Diameter kawat (maks.): 0,3 mm, berat keseluruhan: 4.200 kg, produsen pengendali: FANUC, model controller: 31i-WB, panjang produk (maks.): 2.900 mm, jumlah sumbu: 5, diameter kawat (min.): 0,1 mm, This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016 and features a large working area with an X-axis travel of 800 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3,000 kg and utilizes a FANUC 31i-WB CNC control for precise operations. If you are looking for high-quality wire EDM machines, you should consider the FANUC ROBOCUT alpha C800iB that we have for sale. Contact us for further information. • Working area / Travel: • U-axis: 200 mm • V-axis: 200 mm • Rapid traverse speed: • X-axis: 2,000 mm/min • Y-axis: 2,000 mm/min • Z-axis: 900 mm/min • U-axis: 450 mm/min • V-axis: 450 mm/min • Workpiece capacity: • Maximum workpiece dimensions: 1,250 × 975 × 300 mm • Maximum workpiece weight: 3,000 kg • Wire EDM parameters: • Maximum wire weight: 16 kg • Maximum taper angle: ±30° / 150 mm • Minimum positioning increment: 0.0001 mm • Machine data: • Permissible workpiece weight: 3,000 kg • Electrical data: • Power supply: 3-phase, 50/60 Hz Blsdpfx Adex Nr N As Rsf • Connected load: 13 kVA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 620 kg, jumlah sumbu: 6, en Bsdex D E Hbepfx Ad Rolf

Kondisi: bekas, Tahun pembuatan: 2012, Milling Machines Travel distance X: 635 mm Travel distance Y: 510 mm Travel distance Z: 460 mm HSC (High Speed Cutting) machine Number of axes: 3 Bljdpjv Tx Twsfx Ad Rsf Milling machine / machining centre Control system: Heidenhain TNC 530 Spindle taper: SK 40 Spindle speed: 18,000 rpm Table size X: 790 mm Table size Y: 560 mm Max. workpiece weight: 600 kg Tool changer: 60 positions Drive power: 13 kW Spindle cooling Chip conveyor Including pallet changer Including probe

Kondisi: baru, Tahun pembuatan: 2025, -TFON Kantenverrundungs- und Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenverrundung: Erzeugt eine Radius-2-Kantenverrundung für glatte, sichere Kanten, die sowohl das Erscheinungsbild als auch die Funktionalität des Werkstücks verbessern. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibende Steuerung während des gesamten Prozesses. Bjdpfxehq A T Us Ad Rolf -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen, sodass verschiedene Aufgaben gleichzeitig oder nacheinander ausgeführt werden können. -Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm zur Anpassung an spezifische Produktionsanforderungen. -Tischtypen: Flexible Konfigurationen: magnetische, Vakuum- oder Magnet-Vakuum-Tische sorgen für sicheren Halt verschiedener Materialien und Teilegrößen. -Plasma- und Sauerstofftechnologie: Setzt fortschrittliche Plasma- und Sauerstofftechnik ein, um starke Grate und Schneidschlacke effektiv zu entfernen und eine saubere, glatte Oberfläche zu erzielen. -Oberflächenreinigung: Entfernt effizient Oberflächenverunreinigungen wie Rost, Oxid und Zunder, und bereitet Teile optimal für weitere Bearbeitungsschritte vor. -Kantenverrundung für Beschichtungen: Bereitet Teile optimal für Lackierung und Beschichtung vor, indem eine einheitliche und fehlerfreie Oberfläche sichergestellt wird. -Einsatzbereiche: Ideal für Stahl-Service-Center, Energie-, Bergbau-, Bau- und Automobilbranche; bietet maßgeschneiderte Lösungen für schwere Anwendungen. -Uniforme Ergebnisse: Sechs Lamellenräder arbeiten synchron und erzeugen auf jedem Werkstück gleichmäßige Radiuskanten. -Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder durch reduzierte Abnutzung und gewährleistet dauerhaft gleichbleibende Leistung.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with subspindle (S) for complex turning and milling operations. It features an 8-inch main chuck, a maximum machining diameter of 1 500 mm1, and a machining length of up to 1 910 mm1. The B-axis offers a swivel range from 1 -30b01 to 1 +190b01. Key technical data (Integrex j-200S): Machining capacity: - Max. swing diameter: 1 530 mm1 - Max. machining diameter: 1 500 mm1 - Max. machining length: 1 910 mm1 Main spindle & subspindle: - Chuck size (main & subspindle): 8 inch - Main spindle speed: 1 5,000 rpm1 - Main spindle power (40% DC): 1 18.5 kW1 Milling spindle (B-axis): - Speed: 1 12,000 rpm1 (typical for j-series, partially optional) - Swivel range: 1 -30b01 to 1 +190b01 (220b0 total) - Tool interface: KM63 or CAPTO C6 Axes & capacity: - Y-axis travel: 1 200 mm1 (1 100 mm1) - X/Z axes: 1 450 mm1 / 1 1119 mm1 - Tool magazine: 20-36 tools (depending on configuration) Control: MAZATROL SmoothG or Matrix Nexus 2 Blsdeyfgdljpfx Ad Rsf The machine features a full C-axis for both spindles and an automatic tool changer system, making it suitable for highly productive applications in a compact design.

Tahun pembuatan: 2026, Kondisi: baru, Magnetic separator for chip transport line Bodpfx Adscqvhxj Rjlf Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Location: Ex stock 54634 Bitburg

Tahun pembuatan: 2002, Kondisi: bekas, EN20240616_001_TIMESAVERS_GRINDER Bsdpfot Hw Shex Ad Rslf

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding • Workpiece-protecting removable beechwood slatted top • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm Bodpfxofyadbs Ad Rslf • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg