Mesin bor radial berkecepatan tinggi

DONAU DANUMERIC 440

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Bdsdpfx Abozrr Uusveh Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: - Gantry loader with numerically controlled Z-axis Bdjdpey Tmhzjfx Abvjh - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base Bdjdpou Dg D Aofx Abvjh • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor Bdedpfoyxw Ddox Abveh • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: baru, Tahun pembuatan: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1,750 rpm Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space required approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, equipped with DPA 31 Plus 3-axis digital position display Description: - Heavy, robust construction made from high-quality, vibration-absorbing cast iron Bsdpfxotv Riaj Abvsdh - Oil-bath gearbox with ground, hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precisely ground surface with T-slots and adjustable gibs - Milling head tiltable ± 45° - Forward and reverse rotation - X-axis can be moved either by handwheel or via the table feed device - Automatic end stop for the X-axis - Height-adjustable safety screen with microswitch for protection against flying chips and parts, offering maximum operator safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, disc cutter arbor Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal operation - T-slot nuts - Drift - Operating tools

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Bjdjvv Spkspfx Abvedh Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 2017, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 510 mm, kecepatan rotasi (maks.): 12.000 rpm, Dijual sebuah mesin pusat pemesinan vertikal Mazak VCN 530C yang sangat terawat dengan sistem sumbu ke-4/ke-5 Lehmann 500 Series, tahun pembuatan 2017. Mesin ini unggul dalam hal presisi, keandalan, dan produktivitas yang tinggi, serta sangat cocok untuk produksi komponen tunggal maupun produksi massal. Bdsdpfjzinvcsx Abveh Spesifikasi teknis: Sistem kontrol: Mazatrol Smooth G Jarak gerakan sumbu X: 1050 mm Jarak gerakan sumbu Y: 530 mm Jarak gerakan sumbu Z: 510 mm Meja mesin: 1300 x 550 mm Kecepatan spindel: 35 - 12.000 rpm Spindel: SK40 / DIN 67871A Motor spindel: 18,5/11 kW Jumlah posisi di majalah alat: 30 dan dilengkapi dengan, antara lain: - Konveyor serpihan - Pendingin melalui spindel, tekanan 15 bar - Renishaw MP60 - Sistem sumbu ke-4/ke-5 Lehmann, tipe 500-Series, T1-510520.LL-TAP2-M14 dengan chuck Schunk - Penopang tetap Lehmann, tipe: RST.LIG-80H Jika Anda memiliki pertanyaan tentang mesin ini, atau ingin mengatur jadwal kunjungan, silakan hubungi kami melalui telepon atau email. Jangan ragu untuk melihat iklan kami yang lain untuk mendapatkan gambaran lengkap tentang stok kami.

Kondisi: bekas, Tahun pembuatan: 2007, trans-001 Bdedpfx Aox A S Rdobvoh

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, daya nominal (semu): 41 kVA, tinggi total: 2.808 mm, panjang total: 2.880 mm, lebar total: 2.929 mm, lebar meja: 550 mm, panjang meja: 1.300 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 12.000 rpm, berat keseluruhan: 6.800 kg, jam operasional spindle: 9.271 h, hidung spindel: 150-660, panjang alat: 350 mm, diameter alat: 80 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: konveyor serpihan, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical and visual condition. The machine has been serviced regularly and is both visually and mechanically in top shape. It is fully functional, inspected, and immediately ready for use. Bdjdsy E Hhfspfx Abvsh The Mazak 530C impresses with its premium features, including the 4th axis, which enables precise and efficient machining of complex workpieces for increased flexibility. The automatic door adds convenience and ensures faster setup times and safe operation. Furthermore, the coolant lubrication system (KSS unit) ensures optimal chip removal, resulting in longer tool life and excellent surface finish. Taken together, these features form a comprehensive package aimed at productivity, precision, and reliability. With our all-inclusive service package, we handle the entire process for you on request—from delivery to commissioning your new machine. This includes unloading, installation, and alignment of the machining center. Afterwards, our experienced service technicians will professionally commission the machine, carry out all necessary functional tests, and ensure your Mazak VCS 530C runs with maximum reliability and precision. Additionally, we offer customized training for your staff, so you can make optimal use of the machine from day one. Even after installation, we continue to support you—whether with maintenance, technical queries, or future upgrades. Our all-inclusive package means you do not have to worry about a thing—we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can purchase extraction systems, attachments, and accessories from us—in particular, high-quality Donaldson extraction systems to make your production even more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our highest priorities. Our team consists of qualified and experienced technicians who specialize in Mazak and other machines. We are committed to personal service and ongoing support after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time—see its condition and performance for yourself. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Kondisi: bekas, Gergaji BEHRINGER HBE 321 A Dynamic Bdsdex Tvkxepfx Abvjh