DONAU Danumeric 440

DONAU Danumeric 440

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Psdpfoz S T Ihox Adcogu Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, panjang pemakanan sumbu X: 813 mm, panjang umpan sumbu Y: 508 mm, panjang umpan sumbu Z: 711 mm, Perlengkapan: konveyor serpihan, HAAS EC-500 Pusat Pemesinan Horizontal Produsen: HAAS Automation Model: EC-500 Tahun Pembuatan: 2011 Sistem Kontrol: HAAS CNC Negara Asal: AS Deskripsi Mesin HAAS EC-500 Pusat Pemesinan Horizontal dalam kondisi teknis dan visual yang sangat baik. Mesin ini dilengkapi dengan pengubah palet ganda dan meja putar sumbu ke-4, memungkinkan pemesinan multi-sisi yang efisien dalam satu pengaturan. Ideal untuk pemesinan presisi dan produksi dengan volume tinggi. Spesifikasi Teknis * Jarak tempuh sumbu X: 813 mm * Jarak tempuh sumbu Y: 635 mm * Jarak tempuh sumbu Z: 711 mm * Ukuran palet: 500 x 500 mm * Jumlah palet: 2 * Pengubah palet otomatis * Diameter benda kerja maksimum: 750 mm * Tinggi benda kerja maksimum: 927 mm * Beban palet maksimum: 400 kg * Kecepatan spindel: 12000 rpm * Daya spindel: 22,4 kW * Kerucut spindel: BT40 / CT40 * Spindel penggerak langsung inline * Kapasitas majalah alat: 70 alat * Waktu penggantian alat: 2,8 detik * Kapasitas tangki pendingin: 360 L * Kontrol CNC: HAAS * Jumlah sumbu: 4 Peralatan * Pengubah palet ganda * Sumbu putar ke-4 (sumbu B) * Penahan alat disertakan * Konveyor serpihan * Sistem pendingin * Kontrol CNC HAAS Kondisi Pedoza Ucrspfx Adcogu Mesin dalam kondisi kerja yang baik dan dapat diperiksa saat beroperasi. Uji coba tersedia berdasarkan permintaan. Termasuk dalam Harga * Penahan alat yang terlihat di foto * Pemuatan mesin termasuk dalam harga

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Konfigurasi Mesin • Meja kerja 1200 x 600 mm dengan alur T 4 arah • Jangkauan pergerakan lengan 750 mm • Spindel bor SK 40 dengan sistem penjepit perkakas • Pemrograman kecepatan tanpa langkah • Pengumpanan spindel tanpa langkah melalui motor servo AC • 2 alur T 18 mm di bagian bawah mesin (belakang) • 2 alur T 18 mm di bagian bawah mesin (kiri) • Perangkat pemotongan ulir • Pelumasan terpusat • Perangkat pendingin • Lampu mesin • Tanda CE • Perangkat pelindung • Antarmuka USB Dimensi dan Jangkauan Pergerakan Pemasangan perkakas SK 40 Diameter kolom mm 195 Dimensi meja mm 1800 x 600 Jumlah alur T 4 Jarak antar alur T mm 125 Langkah spindel (sumbu Z) mm 200 Langkah kolom (sumbu W) mm 410 Jarak Tepi bawah spindel - min mm 70 Tepi atas meja maks. mm 680 Jarak Tepi bawah spindel - min mm 970 Lantai maks. mm 1580 Radius pengeboran mm 540 - 1590 Ketinggian meja kerja mm 900 Nilai Pemotongan Kapasitas pengeboran penuh St 60  40 GG 22  50 Pemotongan ulir St 60 M 36 GG 22 M 42 Penggerak Spindel Utama Motor AC, dikendalikan frekuensi kW 5,5 pada 100% ED. Rentang kecepatan: min -1 15 - 2800 Torsi Nm maks. 250 konstan dari min -1 15 – 2000 Pgodpfx Adsz S T A Eocsu Penggerak Pengumpanan Sumbu X - Motor Servo AC kW 0,25 Sumbu Y - Motor Servo AC kW 0,25 Sumbu Z - Motor Servo AC kW 4,50 Sumbu W - Motor Servo AC kW 2,50 Kecepatan gerakan cepat (X/Y/Z): m/menit 7,5 / 7,5 / 5 Kecepatan gerakan cepat (W): m/menit 3 Pengumpanan tanpa langkah mm/menit 5 – 2000 Akurasi Akurasi pemosisian sumbu X, Y pada 1200 mm mm ± 0,075 Data Listrik Tegangan / frekuensi operasi V / Hz 400 / 50 Tegangan kontrol V 24 Unit hidrolik untuk penjepitan kW 0,75 Total daya yang terhubung kVA 13,0 Berat Danumeric 440 (tanpa kemasan) dengan meja 1800 x 600 mm kg 2800 Kontrol CNC Sumbu: 4 (X, Y, Z, W), dapat diperluas Prosesor: CPU 32-bit Layar: Layar datar TFT, latar belakang menyala, mudah dibaca dari semua sisi, 215 x 160 mm Informasi posisi: Kartesius atau polar, ukuran absolut atau inkremental, Satuan ukuran: mm atau inci atau dalam derajat Interpolasi: 2 sumbu (X, Y) Basis data teknologi: Manajemen perkakas, saran perkakas berdasarkan jenis pemesinan, saran data pemotongan yang bergantung pada material Manajemen perkakas: maks. 500 perkakas Teknologi subprogram: ya Siklus Pengerjaan Opsi perangkat lunak standar: Pemrograman dalam mode dialog, 38 pergeseran titik nol, putaran dan pencerminan, Teach-In untuk X, Y, Z, mulai ulang dalam program dengan fungsi pemilihan untuk entri yang ditargetkan Penentuan titik nol: Siklus untuk menentukan titik nol dengan menyentuh manual benda kerja untuk: - bagian siku yang dapat dipasang secara arbitrer - bagian bundar yang dapat dipasang secara arbitrer - memposisikan pengecoran dan bagian yang dibakar - deteksi sudut pada bagian bundar dengan menyentuh tepi atau permukaan referensi Grafik pengujian Tampilan grafis gambar pengeboran

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6234-3, kapasitas pengeboran: 40 mm, panjang total: 3.490 mm, gores kuas bulu: 200 mm, tinggi total: 2.950 mm, lebar total: 1.800 mm, panjang meja: 1.800 mm, kecepatan spindel (maks.): 2.800 rpm, lebar meja: 600 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 2.900 kg, diameter kolom: 195 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, jarak meja ke pusat spindel: 705 mm, daya motor spindle: 5 W, tinggi meja: 900 mm, jarak dari tengah meja ke hidung spindel: 95 mm, arus masuk: 25 A, • Meja kerja 1800 x 600 mm dengan alur berbentuk T 4 arah • Jarak pergerakan lengan 1050 mm • Spindel bor SK 40 dengan sistem penjepit perkakas • Pemrograman kecepatan tanpa tingkatan Pgedpfoz R Rv Rox Adceu • Penggerak spindel tanpa tingkatan menggunakan motor servo tiga fase • 2 alur berbentuk T 18 mm pada rangka dasar mesin bagian belakang • 2 alur berbentuk T 18 mm pada rangka dasar mesin bagian kiri • Perangkat pemotongan ulir • Sistem pelumasan terpusat • Sistem pendingin • Tanda CE • Termasuk dudukan sesuai dengan gambar

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,050 mm Spindle speed: 15 – 2,800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (L x W x H): 2,450 x 1,300 x 2,300 mm Weight: 1,500 kg Equipment: Pgjdpfjy Nd T Hjx Adcju • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine Features: • Worktable 1,800 x 600 mm with 4 T-slots • Arm travel: 1,050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of machine base • 2 x 18 mm T-slots on the left side of machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min./max. (to table): 70 / 680 mm Distance spindle nose – min./max. (to floor): 970 / 1,580 mm Drilling radius: 540 – 1,590 mm Worktable height: 900 mm Machining Values Drilling capacity (solid material): - St 60: Ø 40 mm - GG 22: Ø 50 mm Thread cutting: - St 60: M36 - GG 22: M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Max. torque: 250 Nm, constant from 15 – 2,000 rpm Feed Drives X-axis: AC servo motor 0.25 kW Y-axis: AC servo motor 0.25 kW Z-axis: AC servo motor 4.5 kW W-axis: AC servo motor 2.5 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axis over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1,800 x 600 mm table): 2,800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: Backlit TFT flat screen, easily readable from all angles, 215 x 160 mm Position displays: Cartesian or polar, values absolute or incremental, units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data proposals Tool management: max. 500 tools Subprogram technology: yes Standard software options: dialog programming, 38 zero point offsets, rotate and mirror, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base Pedszrr Uuspfx Adcogu • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), radialdrill-2018-cnc Pjdjy Tn Ntepfx Adcsgu

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Pgsdeu Dg D Aopfx Adcju Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Pjdpfxsvv Spko Adcogu Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB