Cnc-schnellradialbohrmaschine

DONAU Danumeric 440

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6234-3, kapasitas pengeboran: 40 mm, panjang total: 3.490 mm, gores kuas bulu: 200 mm, tinggi total: 2.950 mm, lebar total: 1.800 mm, panjang meja: 1.800 mm, kecepatan spindel (maks.): 2.800 rpm, lebar meja: 600 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 2.900 kg, diameter kolom: 195 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, jarak meja ke pusat spindel: 705 mm, daya motor spindle: 5 W, tinggi meja: 900 mm, jarak dari tengah meja ke hidung spindel: 95 mm, arus masuk: 25 A, • Meja kerja 1800 x 600 mm dengan alur berbentuk T 4 arah Guodpfx Ajz R Rv Roiajh • Jarak pergerakan lengan 1050 mm • Spindel bor SK 40 dengan sistem penjepit perkakas • Pemrograman kecepatan tanpa tingkatan • Penggerak spindel tanpa tingkatan menggunakan motor servo tiga fase • 2 alur berbentuk T 18 mm pada rangka dasar mesin bagian belakang • 2 alur berbentuk T 18 mm pada rangka dasar mesin bagian kiri • Perangkat pemotongan ulir • Sistem pelumasan terpusat • Sistem pendingin • Tanda CE • Termasuk dudukan sesuai dengan gambar

Kondisi: bekas, Tahun pembuatan: 2002, Technical Details: X-axis travel: 1,060 mm Guodpfx Aiju Iddneajh Y-axis travel: 610 mm Z-axis travel: 610 mm Control system: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: drum magazine with 24 stations Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1,220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Machine dimensions approx. (LxWxH): 2.82 x 3.2 x 2.7 m Chip conveyor dimensions (LxWxH): 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard enclosure Including coolant system with internal coolant supply 30 bar (dimensions 1,200x500x150 mm), capacity for 340 liters Spindle with internal coolant supply Scraper-type chip conveyor Control panel with two monitors Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control system is accordingly set to disabled/off. i.D.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), radialdrill-2018-cnc Gusdpey Tn Ntjfx Aiaoh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Gedpfeu Dg D Ajx Aiajuh Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1985, en_001_Technical_Details_Milling_Machine Guodeu Ndcmspfx Aiash

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): Guodpfx Asyxw Ddoiajh St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Gujdevv Spkopfx Aiaoh Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 240 V, rentang pengukuran sumbu X: 580 mm, rentang pengukuran sumbu Y: 300 mm, rentang pengukuran sumbu Z: 200 mm, lebar total: 579 mm, panjang total: 916 mm, tinggi total: 844 mm, berat keseluruhan: 45 kg, berat benda kerja (maks.): 50 kg, Sistem pengukuran 3D VL-770 dengan meja putar bermotor Ø500mm - Kepala pengukur VL-770 Guedpfx Aiovzqp Hjaeh - Unit kontrol VL-700 - Meja objek 500mm VL-750 - Area pengukuran dengan kombinasi hingga Ø500mm atau 580x300mm - Penutup (penggelapan) - Paket perangkat lunak (bahasa Jerman) - Plat kalibrasi - Modul perangkat lunak untuk toleransi bentuk dan posisi - Modul perangkat lunak untuk konversi CAD Deskripsi lengkap dalam brosur

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Deckel Maho DMC 60U hi-dyn, 5 sumbu Pengendali: Heidenhain iTNC 530 Rentang kecepatan spindel: 12.000 rpm Lubang spindel: SK40 Jumlah sumbu: 5 Rentang pergerakan: Sumbu X: 600 mm Sumbu Y: 700 mm Sumbu Z: 600 mm Meja: Panjang luar: 630 mm Lebar luar: 500 mm Pendingin internal: Ya, dengan filter pita kertas Sistem pengukuran alat Blohm Tekanan pendingin: 40 bar Gsdpfx Aiov Rvp Dsaouh Mesin dilengkapi dengan dua palet berukuran 650x500 mm Mesin dilengkapi dengan 120 dudukan alat

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Absorption chiller (AKM) with cooling tower Karlsruhe KRD 1/12-28-3. Cooling capacity: 214 kW, permissible temperature: 10–60°C, max. overpressure: 1 bar, nominal flow rate: 87.1 m³/h, equipped with Wolter GmbH TRZ 900/80 KTK radial fan and Carrier SCS 16LJ-03E-LC absorption chillier. Gusdjn Tpmqopfx Aiaoh