Mesin press hidrolik C-press
Durendus 100 Tonnen Einständerpresse

Name: Durendus 100 Tonnen Einständerpresse
Brand: Durendus
Availability: InStock

Tahun pembuatan

2026

Kondisi

Baru

Lokasi

Ennepetal

Mesin press hidrolik C-press Durendus 100 Tonnen Einständerpresse

Tampilkan peta

Data mesin

Nama mesin:: Mesin press hidrolik C-press

Pabrikan:: Durendus

Model:: 100 Tonnen Einständerpresse

Tahun pembuatan:: 2026

Kondisi:: baru

Harga & Lokasi

Lokasi:: Scharpenberger Str. 96-98, 58256 Ennepetal, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A4746675

Nomor referensi:: HB 2025-A-051

Pembaruan:: terakhir pada 06.03.2026

Deskripsi

For sale: Hydraulic C-frame single-column press by Durendus, with adjustable pressing force up to 100 tonnes. Suitable for a wide range of pressing, assembly, and forming operations in industrial and production environments.

The machine shown has already been built and delivered on behalf of a customer. We can produce this model for you at short notice – including custom options tailored to your specific requirements.

Technical specifications of the offered machine:
#####
Technical Data & Information:
Hydraulic Single-Column Press – C-Frame – 100 T

####General Specifications
- Designation: Hydraulic single-column press
- Type: C-frame / Single-column press
- Manufacturer: DURENDUS
- Pressing force: 15–100 T (adjustable)
- Max. installation height: 700 mm
- Table size: 800 x 600 mm
- Ram area: 800 x 600 mm
- Table height from floor: 900 mm
- Overall dimensions (W x D x H): approx. 1600 x 1800 x 2900 mm
- Total weight: approx. 4,800 kg
- T-slots and bores: Customized per customer specification

####Hydraulic Cylinder
- Piston stroke: 0–500 mm (adjustable)
Cpjdpfjfu Nqxsx Aa Tew
- Max. operating pressure: 245 bar
- Return speed: 110 mm/s
- Ram speed under load: 5–12 mm/s
- Idle speed: 140 mm/s

####Hydraulic Unit
- Hydraulic pump: Rexroth
- Flow rate: 28 l/min
- Motor power: 11 kW
- Pressure accuracy during pressing stroke: ± 5 bar
- Pilot valve: NG-50
- Hydraulic unit installation: Top mounted on press
- Filter manufacturer: Filtrec
- Electronic oil level monitoring: Included
- Cooling: Air-cooled

####Control System
- PLC: Siemens S7-1200
- Touchscreen: Siemens SIMATIC Comfort 9"
- Parameters adjustable via touchscreen: Pressure, stroke, speeds
- Oil temperature display: Included
- Filter contamination indicator: Included
- Fault display: Included
- Remote access: Available
- Recipe memory: Up to 100 programs

####Operating Modes
- Manual / Set-up mode
- Manual / Single cycle
- Automatic mode
- Activation via two-hand operation and foot pedal

####Safety
- Ram hydraulic interlock
- Safety limit switches (top and bottom)
- Safety PLC
- Light curtain: SICK / KEYENCE / LEUZE, 700 mm, finger protection
- Monitored safety doors on left and right of table

####Electrical Connection
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Main motor connection: 11 kW
- Total connected load: approx. 13 kW

(Hydraulic press, single-column press, C-frame press, 100-ton press, 100 T press, hydraulic single-column press, industrial press, production press)
#####
Looking for a hydraulic press tailored to your application?
Contact us for a custom quote.

Our hydraulic presses are manufactured according to German and European Machinery Directives (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our core expertise lies in special machine construction and press automation. We offer custom hydraulic presses at surprisingly competitive prices.
We use high-quality hydraulic components from leading European manufacturers in our presses.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2018

92 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 209 9... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Eislingen/Fils

11.123 km

Otomatis meninju tekan
BRUDERERBSTA 30

Hubungi

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Cjdpfxjcxxycs Aa Tepw Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Lihat detail

Iklan kecil

Cuggiono

11.254 km

PUSAT PERMESINAN
OkumaMILLAC 852V

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 2.050 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 750 mm, jumlah slot dalam magazin alat: 36, panjang meja: 2.200 mm, lebar meja: 850 mm, model controller: OKUMA-OSP-HMI, pasokan pendingin: 15 batang, jarak dari tengah meja ke hidung spindel: 950 mm, daya motor spindle: 22 W, jumlah spindel: 36, pergerakan cepat sumbu Z: 16 m/menit, gerak cepat sumbu X: 16 m/menit, pergeseran cepat sumbu Y: 16 m/menit, hidung spindel: BT 50, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 50 rpm, beban meja: 2.500 kg, diameter alat: 120 mm, panjang alat: 400 mm, berat alat: 20 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, 3-axis vertical machining centre with OKUMA-OSP-HMI CNC Csdpju Dinkefx Aa Tspw

Lihat detail

Iklan kecil

Alat mesin penggiling Schneeberger Corvus GDS 650

Reiden

11.281 km

Alat mesin penggiling
SchneebergerCorvus GDS 650

Hubungi

Iklan kecil

Mesin bending bulat Isitan 4R HMS 1270 x 130

Mudersbach

11.201 km

Mesin bending bulat
Isitan4R HMS 1270 x 130

Hubungi

Kondisi: baru, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end bearing Cpjdpfxeiffwqo Aa Tjw Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2,150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on a yield strength of 250 N/mm² Material: (ST 37 - ST 42 construction steel)

Lihat detail

Iklan kecil

Mesin press tempa Hidralmac 40 T Einständerpresse

Ennepetal

11.234 km

Mesin press tempa
Hidralmac40 T Einständerpresse

Hubungi

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Cpedpfx Asfxyhfja Tsw Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Lihat detail

Iklan kecil

Studer S30 CNC LeanPro Studer S30 CNC LeanPro

Gussago

11.149 km

Studer S30 CNC LeanPro
StuderS30 CNC LeanPro

Hubungi

Kondisi: bekas, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centres: 1000 mm Centre height: 175 mm Swivelling grinding head (B axis) 360° (1° increments) 2 external grinding wheels 1 internal grinding wheel External grinding wheel: 400 mm x 40 mm x 127 mm Overhauled spindle > see photos Tailstock: Morse taper 4 (CM 4) Speed range: 0–1000 RPM CNC control: Fanuc Programming: Pictogramming Heidenhain linear encoders Cpsdpfx Aswim U Hoa Tjw The machine is under power in our warehouse in Gussago (BS), Italy.

Lihat detail

Iklan kecil

Mesin pemotong laser serat MicroStep MSF Pro 4020 10KW Fiber mit Bohrspindel!

Sankt Barbara im Mürztal

10.716 km

Mesin pemotong laser serat
MicroStepMSF Pro 4020 10KW Fiber mit Bohrspindel!

Hubungi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 11.500 h, nomor mesin/kendaraan: 3098, jam kerja laser: 6.900 h, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, daya: 10 kW (13,60 hp), tahun perombakan terakhir: 2024, jangkauan kerja: 4.020 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series, equipped with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW power Technical data: Machine model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guideways: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic tool measurement Pneumatic hold-down device Chip removal brush Donaldson® filter unit DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software Cpsdpfx Aovw Tdlja Tsw With Witt gas mixer The machine has always been operated with a maintenance and support contract.

Lihat detail

Iklan kecil

Mesin gerinda alat 7-sumbu Schneeberger Corvus GDS 650

Kaufungen

11.078 km

Mesin gerinda alat 7-sumbu
SchneebergerCorvus GDS 650

Hubungi

Iklan kecil

Enschede

11.244 km

Pers bengkel
AYEL-TECHWP-HD 100

Hubungi

Iklan kecil

Mesin meninju otomatis Edelhoff DARR1/200/830

Ennepetal

11.234 km

Mesin meninju otomatis
EdelhoffDARR1/200/830

Hubungi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet Cpedpfx Ajgpxc Sja Tow

Lihat detail

Beriklan di sini