Press eksentrik

EBU 35

Kondisi: baru, Tahun pembuatan: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Nodpfx Ao Ea U Hol Tslh Selectable with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): Nodoktg Dhopfx Al Tjlh - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Kondisi: baik (bekas), Maximum thread tapping capacity, metric thread: brass M33, cast iron M16, steel M14, incl. accessories. Nodpfoibmn Eex Al Telh

Kondisi: bekas, Tahun pembuatan: 2005, AGIECUT Challenge 2 eCut Tahun pembuatan: 2005 RINCIAN TEKNIS Jangkauan sumbu X: 350 mm Jangkauan sumbu Y: 250 mm Jangkauan sumbu Z: 256 mm Nljdjua Uzfjpfx Al Teh Sumbu U/V: ±70 mm Sudut kerucut: 30°/100 mm Kecepatan pemotongan: > 300 mm²/menit Kualitas: Ra 0,1 µm Tinggi ulir: 250 mm Cetakan untuk membuat ulir: 1/2 mm Diameter kawat: 0,1 - 0,33 mm Tinggi benda kerja: 250 mm Lebar benda kerja: 550 mm Panjang benda kerja: 750 mm Berat benda kerja dengan/tanpa bak: 200 / 450 kg RINCIAN MESIN Ukuran bak: 700 l Dimensi: 2215 x 2215 x 2220 mm Berat bersih: 3600 kg

Tahun pembuatan: 1989, Kondisi: bekas, Pressure: 80 t Outreach: 285 mm Stroke: 10–100 mm Nlodpep Apxdsfx Al Teh Strokes per minute: 65 Ram adjustment: 60 mm Table size: 850 x 640 mm Ram size: 420 x 210 mm Table height: 800 mm Ram bore diameter: Ø 50 mm Machine weight: approx. 5.2 t Space requirement (WxDxH): approx. 2500 x 2500 x 2700 mm Hydraulic clutch-brake combination Centralized grease lubrication Mechanical overload protection in the ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation

Kondisi: bekas, Tahun pembuatan: 1978, nomor mesin/kendaraan: 4788, Total gaya tekan: 35 t Overhang: 225 mm Langkah ram: 8 - 80 mm Penyesuaian ram: 50 mm Tinggi pemasangan (langkah bawah, penyesuaian atas): 325 mm Luas meja penjepit sekitar: 600 x 450 mm Luas penjepit ram sekitar: 300 x 225 mm Jumlah stroke per menit: 160 min⁻¹ Kebutuhan daya: 2,2 kW Nlodpew Tukisfx Al Toh Dimensi PxLxT: 1000 x 1600 x 2200 mm Berat mesin sekitar: 1,9 t

Kondisi: diremajakan ulang (bekas), Daya nominal pada 50% ED: 25 kVA Arus hubung singkat: 12 kA Gaya elektroda: 120 daN / Satu langkah Jangkauan: 150 mm --- Kontrol: AR.01 (5 waktu, 2 program) --- Garansi: 6 bulan --- Nledpfxew Natbo Al Toh Pelatihan dan commissioning sesuai permintaan --- Elektroda las titik & suku cadang tersedia dari stok --- Informasi lebih lanjut di situs web kami: wahlenmeier.de

Kondisi: bekas, druck-45t-parameter Nedpfjykb Ddox Al Telh

Kondisi: baik (bekas), Tahun pembuatan: 1997, nomor mesin/kendaraan: 0550296, 26149 Nodpfxey Tvdxo Al Tolh

Kondisi: bekas, Pressing force: 35 t Outreach: 220 mm Stroke: 10 - 120 mm Stroke rate: 120 strokes/min Ram adjustment: 50 mm Table area: 590 x 440 mm Ram area: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Equipment: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is carried out in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack testing, new seals and V-belts Nlodpfxoykb Dqo Al Toh - New paint finish: Light Grey RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front hood - New control cabinet with ABB safety control and touch display Control via touchscreen mounted on the front of the control cabinet, Cabinet positioning (cable length) as agreed with the end customer, Standard 0.8–1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand control - Current safety inspection (UVV) with brake time measurement After the modernization is completed, the machine is approved for manual loading operations with open tools.