Mesin bentukan

Edel 910E

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request. Iedpfxefg E Hpe Aa Neal

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 1.250 mm, Sudut pembengkokan (maks.): 160 °, ketebalan pelat baja (maks.): 1 mm, tebal plat aluminium (maks.): 12 mm, ketebalan pelat tembaga (maks.): 12 mm, berat keseluruhan: 100 kg, panjang total: 1.500 mm, This is a lightweight yet robust segmented folding machine with a working width of 125 cm. Directly from Prod Masz‼️ Segmented bending machine, length 1250 mm Lightweight (despite its capabilities) at only 105 kg, 100% segmented Easy to transport Segment fingers can be changed without keys or tools Plus several other convenient features Need reliable equipment? Have special requirements? Contact us‼️ We provide professional solutions with maximum durability. Prod Masz stands for reliability. Triple-segmented folding machine SGR-1250/1.0mm Technical data: - Max. working width: 1250 mm - Max. bending angle: 160 degrees - Bending beam thickness: 15 mm - Max. sheet thickness (steel): 1.0 mm; aluminium: 1.2 mm - Weight: 105 kg - Segment widths: 30, 40, 50, 60, 70, and 100 mm - Three beams equipped with segmented fingers (fully segmented) - Degree scale - Clearance: 55 mm Total length: 1.6 m Height: 45 cm Iaedpfxscgmf Rs Aa Nol Price: €3,200 Delivery time: weekly Cash payment upon delivery Nationwide delivery within Germany: €180 We look forward to hearing from you! Invoices are issued with 0% VAT as an intra-community supply or plus 19% VAT as applicable.

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m Isdpscxxycofx Aa Njal High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: baru, Pressure: 25 t Reach: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Strokes per minute: 160 spm Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in the table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Iasdpsb U Hwpofx Aa Njl Total power requirement: 2.7 kW Machine weight: approx. 1.9 t Space requirement: approx. 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: siap digunakan (bekas), Peralatan terdiri dari: 1 - Menara decoiler dengan 4 decoiler (AG 3000 a) kapasitas per decoiler: 3 ton panjang lengan: 1350 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi Iajdsxqh Sajpfx Aa Nel 2 - Selektor gulungan (MT-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 3 - Unit perata (RM-4 1250) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 4 - Unit pemotongan (TS 1250 + KST-2) min: 150 mm kecepatan maksimum: 25 m/menit, dikendalikan frekuensi 5 - Gunting Schechtl untuk pemotongan presisi dengan kontrol CNC Siemens Touch 1250 x 2 mm

Kondisi: baru, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Angle adjustable: from fixed to fixed degrees Iajdjftd Uaopfx Aa Nol Table area: 450 mm x 305 mm Total power requirement: manual operation Machine weight: approx. 95 kg Dimensions (L x W x H): 530 x 380 x 480 mm

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t Ijdpfx Aasb U Hwnj Neal - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Pressure: 40 t Outreach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Iedpfx Aaob U Hwmo Nsal Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 135 t Approach speed: 140 mm/s Maximum bending speed: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between uprights: 2555 mm Machine length: 3730 mm Machine width: 2300 mm Ijdpfx Aasq Rdtqj Njal Overall height: 2850 mm Table height: 900 mm Motor power: 15 kW Oil tank capacity: 190 l Machine weight: 9500 kg (Technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double-guided press beam, robust and precise - Heavy-duty, double-guided backgauge - Manual backgauge fingers, double-guided on linear rails - Adjustable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T CNC control - Fiessler AKAS 2M laser finger guard + FPSC Safety PLC (manual) - X and R axes driven by servomotors - CNC crowning for high bending accuracy - Two additional backgauge fingers - Additional bending lengths and capacities available with suitable accessories! -

Kondisi: bekas, Tahun pembuatan: 1993, en-GB-001 Iaodpfx Aeu Rni Hja Nsl