Gergaji bundar dingin

EISELE VMSIPV410

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm Itjdoktg Dhopfx Aahor - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick clamping device for material - Continuously adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a very robust rectangular guide Isdpst A Ar Ssfx Aahetr - Convenient, continuously adjustable stroke setting of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade exchange - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in the machine base Space required: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be inspected and tested under power at our facility by appointment. All information is subject to change without notice. Subject to prior sale. The item is sold without any warranty. This exclusion does not apply to damages resulting from gross negligence or intentional misconduct by the seller, nor to injury to life, limb or health.

Kondisi: bekas, Tahun pembuatan: 1989, Saw blade diameter 320 mm Cutting diameter 140 mm Total power requirement 3 kW Machine weight approx. 0.5 t O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS III-S-PV Year of manufacture 1989 _____ Max. saw blade Ø 320 mm Cutting capacity: Tubes approx. 130 mm Flat material 200 x 100 / 140 x 100 mm Solid material square 120 mm Note: Smaller cutting dimensions may apply for mitre cuts Up to max. 140 mm Blade stroke manually vertical approx. 200 mm Isdpfx Aaow Dvivehotr Saw blade speeds 17–34 rpm Saw drive approx. 2 / 2.6 kW Total drive approx. 3 kW – 380 V – 50 Hz Weight approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90° via scale • Pole-changing three-phase motor with max. 2.6 kW drive • Saw carriage feed manually via long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant device with chip tray • Roller conveyor material infeed approx. 2,000 mm • 2 spare saw blades Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. We also have further larger EISELE cold circular saws and other (band/frame/cold circular) saws in stock. Further sawing machines available at all times – please enquire with us.

Kondisi: baru, Tahun pembuatan: 2024, The OS 3008 welding fume extractor is ideal for extracting fumes and vapors generated during welding, polishing, cutting, or grinding of rare precious metals. It is capable of filtering large quantities of airborne metal particles harmful to human health. This machine features high filtration efficiency, low noise emissions, and a relatively small footprint. It is suitable for extraction during arc welding, carbon dioxide welding, MIG/MAG processes, slot arc welding, and welding in gas environments. Extraction capacity: 3,000 m^3/h These extractors are equipped with high-efficiency filter cartridges, distinguished from conventional filters by the presence of a PTFE (polytetrafluoroethylene) membrane layer. Itsdpotu H N Hsfx Aahsr In conventional filters, the fiber length of typical filter materials like cotton, satin, paper, and other cellulose fibers range from 5 to 60 μm. Soot particles present in extracted fumes can accumulate and clog the filter element. Once clogging becomes excessive, ash can no longer be effectively removed, air resistance increases, and airflow decreases. As filter contamination increases, filtration efficiency drops significantly. Our filter incorporates a PTFE membrane layer whose fine structure blocks microscopic dust particles. These particles form a dust cake on the surface of the filter material. Most dust particles remain on the outer surface of the filter without penetrating the filter medium. Over time, these particles can be removed by pulses of clean compressed air. Air flow (m^3/h): 3,000 Pressure (Pa): 2,000 Filtration efficiency (%): 99.9 Power (kW): 3 Filter area: 30 Filter size: 700 x 750 x 1,700 mm Voltage (V): 380 Weight (kg): 90 An additional filter costs EUR 140 (excluding VAT).

Kondisi: bekas, Tahun pembuatan: 1991, Pressure: 60 t Throat depth: 280 mm Stroke: 10 - 90 mm Ram adjustment: 60 mm Stroke rate: 110 strokes/min Table surface: 740 x 550 mm Clamping plate: 740 x 555 mm Ram surface: 380 x 200 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight approx.: 3.85 t Space requirement approx.: W 1.1 x D 1.6 x H 2.3 m - Fixed table - Clamping plate - Ortlinghaus hydraulic clutch with additional brake - Manual central lubrication The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and fully technically inspected - Shaft removed, crack tested, new seals installed - New paintwork - New control cabinet with touchscreen - New breaking plate + cutting ring Itedpfev Az T Ssx Aahsr - Up-to-date press inspection

Kondisi: bekas, Tahun pembuatan: 1979, Maximum raw tube diameter: 50 mm Itodpfxeucgu Aj Aahor No accessories included Pipe cutter/separator: yes

Kondisi: bekas, Pressure 45 t Outreach 230 mm Stroke 8–96 mm Total power requirement 4 hp Ijdpewgi Rxjfx Aahstr

Kondisi: baru, Tahun pembuatan: 1984, Pressure: 80 t Throat depth: 280 mm Stroke: 10–100 mm Stroke rate: 52/80 strokes/min Ram adjustment: 60 mm Table area: 850 x 550 mm Ram area: 420 x 220 mm Pass-through opening in table: 300 x 200 mm Table height: 780 mm Ram bore diameter: 45 mm Machine weight approx.: 4.5 t Space requirement approx.: 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Central manual grease lubrication Mechanical overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Iedowa Umlepfx Aahotr

Kondisi: baik (bekas), Tahun pembuatan: 2002, Metal circular saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Model: VMS 300 PV Year of manufacture: 2002 Iodpfoxwl Urox Aahstr Condition: used Cutting capacity: Straight cut: 120 x 75 mm 45° mitre cut: 80 x 75 mm Speed: 40/80 rpm Weight: 200 kg – Semi-automatic version – Pneumatic quick-clamping devices – Infinitely variable hydropneumatic saw blade feed – Saw unit stroke adjustment via clamping lever – Generously dimensioned gearbox with EISELE rotation compensation – Convenient saw blade change Scope of delivery: – Operating manual – 1x saw blade (mounted)

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190600036, ProfiMaster is a high-quality extraction unit designed for occasional to frequent use during welding operations generating low to medium levels of welding fumes. The device’s disposable filters boast a large capacity and can be replaced with exceptional ease. Its rotatable and pivoting extraction hood delivers a 360-degree operating radius, minimizing repositioning during welding. - Hose version with 4 m extraction arm Isdpfx Aajwxccfshstr - Including automatic start-stop function The unit was purchased in 2019 and has not been used since spring 2023 due to changes in operational requirements.