Mesin bubut tengah

ELMAG INDUSTRIE 1000/230 HD

en-ELMAG INDUSTRIE 1000/230 HD Universal Centre Lathe with Lead and Feed Screw 88173

including RÖHM chuck
including 3-axis digital position display
including quick-change tool post 'Set', Multifix system
Ready for operation: filled with oil, de-preserved (degreased), fully assembled and test-run completed

Heavy-duty centre lathes with lead and feed screw, 5,500 Watts:
The quality of the INDUSTRIE 230 HD models is evident from the moment you turn them on: barely audible drive noise. No vibrations even at large cutting depths. In fact, the 230 HD models, weighing 2,635, 2,835 or 3,055 kg, are the heaviest in their class, and thanks to their extremely robust design—such as high-frequency induction-hardened prismatic guideways—are ideally suited for heavy-duty and continuous operation.

The 230 HD offers an extra-large 80 mm spindle bore for machining bar stock up to 2 1/2 inches (76.1 mm) in diameter. A swing over cross-slide of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave little to be desired for machine, steel, plant and tool building—likewise, 12 speeds for 170 longitudinal and cross feeds as well as 150 leadscrew pitches for metric and imperial threads.

Standard equipment:
- digital position display included
- RÖHM three-jaw chuck Ø 250 mm
- Four-jaw independent chuck Ø 315 mm
- Faceplate Ø 350 mm
- 2 fixed centre points
- Revolving tailstock centre MK 5
- Travelling steady
- Fixed steady
- Quick-change tool post set, 5-piece MB
- Thread dial indicator
- Halogen machine lamp
- Emergency stop / no-voltage release
- Chuck guard with safety switch
- Machine base / chip tray / splash guard
- Tool set / operating manual / CE

Optional accessories:
- Indexable insert turning tool set 25 x 25 mm, 7-piece
- Indexable insert set, 7-piece for turning tool set 25 x 25 mm
- Turning tool set 'Camlock' 25 x 25 mm, 7-piece
- Parting-off tool holder 25 x 25 mm, length 150 mm
- Blades for parting-off tool holder 25 x 25 mm

ADVANTAGES:
- CE-compliant machines with maximum safety and machining accuracy according to DIN standards
- Powerful and robust for commercial and industrial applications
- Coolant tank and pump integrated in machine base

TECHNICAL DATA:
Centre distance 1000 mm
Centre height 230 mm
Swing over bed 460 mm
Swing over cross-slide 290 mm
Swing without gap 700 mm
Bed width 340 mm
Gap length 200 mm
Cross-slide travel 280 mm
Top-slide travel 100 mm
Max. turning tool cross-section 25x25 mm
Chuck fitting D1 - 8
Spindle nose (headstock) MK 7 mm
Spindle bore 80 mm
Spindle speed 25 - 1800 rpm
Number of speeds 12
Longitudinal feeds (170) 0.04 - 2.46 mm/rev
Cross feeds (170) 0.02 - 1.23 mm/rev
Metric thread pitch (24) 0.5 - 20 mm
Metric module threads (20) 0.25 - 10 mm
Imperial threads, TPI (61) 1-5/8 - 72 TPI
Imperial module threads, TPI (45) 3-1/4 - 96 TPI
Leadscrew pitch 6 mm
Leadscrew diameter 40 mm
Tailstock taper MK 5
Tailstock quill diameter 75 mm
Tailstock quill travel 130 mm
Motor output 5500 W
Ffedpfx Adstw Dxkegst
Coolant pump 40 W
Power connection 400/50 V/Hz
Overall length 2310 mm
Overall height 1255 mm
Weight 2635 kg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.