Pusat pemrosesan batang

Elumatec SBZ 150

elumatec SBZ150 Profile Machining Center 6.0m

5-axis control. Efficient machining of aluminum and steel profiles
Working length: 6,000 mm

Description:
Short tool change times; automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angle head or special milling cutter with max. 100 mm diameter); six-sided machining; underside processing with angle head (option);
Fast positioning (up to 60 m/min) of the machining unit along the X-axis; low-wear direct drive; with automatic clamp detection and positioning;
Dual-circuit clamping system with two pneumatically retractable stops; equipped as standard with automatic central lubrication system;
Rigid machine bed for a working length of 6,000 mm;
Continuous support table;
Clamping system with integrated six-row circulating roller units and linear guides.
5-axis industrial PC control, including
3 axes as path control; high-dynamic three-phase servo drives with resolver and digital servo controller; freely programmable swivel angles for the A and C axes;
With color display and floppy disk drive;
Storage capacity for over 200,000 sets;
3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc.
Integrated network card 10/100 MBit, RJ45 connection (network connection must be provided by the customer's administrator)
Analog modem (customer must provide an analog phone line)

Technical Data:
Travel range X-axis: max 6,240 mm
Max. travel speed 60 m/min
Travel range Y-axis: 1,000 mm
Max. travel speed 30 m/min
Travel range Z-axis: 635 mm
Max. travel speed 30 m/min
Swivel angle A-axis: 0-90° freely programmable
Swivel angle C-axis: 0-355° freely programmable
For further details on the milling area, see drawing no. 150 05 17 08
Max. machining length for face machining left + right: 6,000 mm (with tool length 150 mm)
Positioning accuracy:
X-axis +/- 0.1 mm / 1 m length
Y-axis +/- 0.1 mm
Nlodpfsw A Rv Isx Alkoa
Z-axis +/- 0.1 mm

Milling Spindle:
Speed [rpm]: up to 100-22,000
Power [kW]: 15
Tool holder: HSK-F 63
Cutter diameter: max. 100 mm
Saw blade diameter: 400 mm
Tool length: max. 150 mm from nominal taper size

Included Accessories:
Automatic tool changer (without tool holders)
Dual-circuit clamping system with 2 pneumatically retractable material stops
Automatic clamp detection and positioning
8 horizontal pneumatic material clamps
Tool setting gauge
Front light barrier
Saw blade DM400 with holder
Angle milling head

Important:
The profile machining center is equipped as standard with front light barriers for safety.
For additional lateral and rear safety, on-site measures are required, or please inquire about our safety fence solutions.

Incl.
Angle milling head for underside machining

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.