Pusat permesinan batangan

Elumatec SBZ 150

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angle head or special milling cutter with max. 100 mm diameter); six-sided machining; underside processing with angle head (option); Fast positioning (up to 60 m/min) of the machining unit along the X-axis; low-wear direct drive; with automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; equipped as standard with automatic central lubrication system; Rigid machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row circulating roller units and linear guides. 5-axis industrial PC control, including 3 axes as path control; high-dynamic three-phase servo drives with resolver and digital servo controller; freely programmable swivel angles for the A and C axes; With color display and floppy disk drive; Storage capacity for over 200,000 sets; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ45 connection (network connection must be provided by the customer's administrator) Analog modem (customer must provide an analog phone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Fjdpfx Acsw A Rv Islegd Swivel angle C-axis: 0-355° freely programmable For further details on the milling area, see drawing no. 150 05 17 08 Max. machining length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper size Included Accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamps Tool setting gauge Front light barrier Saw blade DM400 with holder Angle milling head Important: The profile machining center is equipped as standard with front light barriers for safety. For additional lateral and rear safety, on-site measures are required, or please inquire about our safety fence solutions. Incl. Angle milling head for underside machining

Kondisi: bekas, Tahun pembuatan: 2018, Delivery time approx. 5 months. Machine from a training facility – EXCELLENT condition, low operating hours (edge banding unit unused). Without tooling. Additional costs for dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a rich selection of edge banding tools to meet all woodworking requirements. MAIN ADVANTAGES - Powerful, with advanced H80C edge-banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology, offering over 1,000 hours of maintenance-free operation Fgodpfoyuw Srex Aclsd - Superior and generously equipped; suction cups can be positioned and configured using the FLEX worktable to optimally suit requirements - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies "MAESTRO EDGE" - Simple operation: lowered frame for full accessibility to the worktable, integrated control cabinet and vacuum pump, and no safeguarding elements required in the PRO SPACE configuration Base Structure: The base structure is a monolithic construction made from thick-walled steel, reinforced with welded box plates along the entire machine bed, delivering extreme rigidity. The bed design, with a broad base, is key to ensuring long-term precision and stability. The supporting frame features an exceptionally robust, monolithic steel base with heavy ribbing for outstanding stiffness. The exceptionally wide footprint was specially designed to provide stability to the machine, ensuring ongoing precision regardless of working conditions – the machine does not need to be anchored to the floor. The base forms a large and solid mounting surface for the mobile gantry: the machining unit is therefore provided with a balanced, stable, and resilient support, capable of withstanding high loads for superior performance and greater accuracy. The mobile gantry consists of a solid single-piece attached to the base, gliding on prism guides with recirculating ball-bearing carriages of the highest quality. The machining unit is mounted on it and travels along the Y and Z axes on prismatic guides with ball carriages. Movement of the lower mobile unit (X-axis) and the working unit along the bar of the mobile unit (Y-axis) is achieved via helical rack and pinion drive, providing increased tooth engagement for higher acceleration and greater axis speed (X and Y). The specially designed helical gearing ensures reduced wear of mechanical components and lower noise levels. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and supporting strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for absolute machining quality.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 9.500 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 630 mm, kecepatan spindel (maks.): 24.000 rpm, nomor mesin/kendaraan: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Max. milling cutter diameter: 100 mm Max. slotting cutter diameter: 100 mm Max. saw blade diameter: 400 mm Tool interface: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spray EQUIPMENT Machining processes: Milling, drilling, tapping, thread milling, broaching, and sawing on stationary profile bar 6-sided machining: front optional, bottom side possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives in all axes Axes: 5-axis control for spatial machining operations Display: 15” colour screen Interfaces: USB ports, network connection 2-layer machining for pendulum operation Appropriate tooling (HSK tool holders) Two circular saws for aluminium Fedsycul Sepfx Aclegd Note: Documentation of the machine’s dismantling is included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1500050285, jarak pergerakan sumbu X: 7.800 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 630 mm, kecepatan spindel (maks.): 24.000 rpm, jumlah slot dalam magazin alat: 14, translation_01 Fedpfjxx Uf Nsx Acljgd

Kondisi: baru, Tahun pembuatan: 2022, de Fedpfx Asgyw Sdoclogd

Tahun pembuatan: 2007, jam operasional: 4.100 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin ini sudah tidak dibutuhkan lagi untuk produksi kami dan oleh karena itu dijual. Mesin ini milik kami sejak tahun 2007 dan selalu dilakukan perawatan rutin. Semua berfungsi normal. Pembongkaran dan pemuatan ke truk sudah termasuk dalam harga. Informasi lebih lanjut: Pusat pemesinan profil 5-sumbu Dirancang untuk pemesinan aluminium yang fleksibel dan efisien Posisi penjepit otomatis Panjang kerja maksimum: 9.300 mm 12 penjepit pneumatik Majalah alat berkapasitas 20 alat dan pisau gergaji 500mm Jam kerja spindle: 4100 jam Spesifikasi teknis tambahan tersedia atas permintaan. Fgjdpfx Acswwtw Deled

Kondisi: bekas, Tahun pembuatan: 1994, fi Fsdpfsu Nigkox Aclsgd

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.150 mm, jarak lintasan sumbu Y: 1.850 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 24 m/menit, kecepatan spindel (maks.): 24.000 rpm, torsi: 87 Nm, CNC Fidia C20 WORKING ENVELOPE X-axis travel (longitudinal): 3,150 mm Y-axis travel (transversal): 1,850 mm Z-axis travel (vertical): 1,000 mm MAXIMUM AXIS SPEEDS X, Y axis feed rate: 30 m/min Z axis feed rate: 24 m/min WORKTABLE Clamping surface: 3,000 x 1,600 mm Fgedpoyw Tddefx Aclsd Maximum load capacity: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE Maximum power (S6 60%): 55 kW Spindle speed range: 240 – 24,000 rpm Constant power range: 6,000 – 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: 2,000°/min C-axis offset relative to spindle axis: 75 mm A-axis travel: +95° / -110° A-axis speed: 2,000°/min Max. distance spindle nose - table surface: 1,175 mm Machine is equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various machine accessories • User and maintenance manual and CE conformity declaration

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Fgedpfxowwlk Ne Aclsd

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Fsdpjuiy Ngsfx Acljgd Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training