Mesin penggilingan

EMCO FB 450 M

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel Gbodevt D D Ujpfx Alkol - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Required space: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical specifications Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1300) mm Recommended maximum grinding depth: up to 300 mm --> Grinding table travel Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 - 9.99 m/min --> Infeed speed: 0 - 99.99 m/min --> Incremental infeed value (reversal): 0 - 0.999 mm --> Grinding table travel X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 - 5 m/min / revolution --> Infeed speed: 0 - 99.99 m/min / revolution --> Incremental infeed value (reversal): 0 - 0.999 mm / Ø --> Workpiece spindle head swiveling range: Godpjw Intaofx Alkobl --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36”) --> U-axis travel (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above work table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, daya motor spindle: 13.000 W, kecepatan spindel (maks.): 6.300 rpm, jumlah sumbu: 2, en-GB Godpfx Aljyffgrjkebl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis 110 mm Travel of machine head 450 mm Table to spindle nose 0 – 527 mm Quick-change system SF 32 Work spindle 2.9 kW Steplessly adjustable speed range 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirement (W x D x H) 1.5 m x 1.35 m x 2.1 m Gbsdowkrp Eopfx Alkel Weight approx. 850 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE Compliant! Technical Specifications: >> Year of manufacture: 2015 Machine No.: 610398 >> Milling table clamping surface: 800 x 425 mm Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Max. table load: 300 kg >> Spindle speed range: 1-4500 rpm >> Infinitely variable feed: 0-2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx.: 2025 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: AC three-phase motor Rated output at 100% duty cycle Equipment and Accessories: >> Heidenhain TNC 128 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual Gbjdpswz Eu Njfx Alkjl >> Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 offers a wide range of dialog-guided cycles with graphical simulation for fast and simple data input, e.g.: various drilling cycles, tapping, bolt circles, linear hole rows, rectangular pockets, rectangular tenons, and face milling patterns. This universal milling machine is in like-new condition. The control unit is extremely user-friendly. In addition, the machine features hydraulic clamping systems for both vertical and horizontal operation. Conversion from vertical to horizontal is very straightforward by simply tilting away the vertical head. The guides are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Data teknis: Gbodpfjwyit Hox Alkjl Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming in line with current standards. Technical data: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z-350 mm - Spindle mount SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20-3150 rpm, infinitely variable - Feed range 1-3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld operating device - Safety enclosure Inspection or test run under power on site is of course possible. We are happy to offer you transport, installation, and commissioning at your site. Everything from a single source: We, Baumgärtner CNC GmbH &, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and those of other renowned manufacturers. Gbodpfx Ajxw N S Ijlkol We support you! From machine purchase, transport, and installation all the way to commissioning and subsequent maintenance or repair work – you can count on us.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, kecepatan spindel (maks.): 36.000 rpm, jam operasional spindle: 4.651 h, hidung spindel: HSK 50, jumlah spindel: 15, Perlengkapan: Penandaan CE, dokumentasi / manual, PUSAT MESIN VERTIKAL MIKRON MODEL HSM 800 PERGERAKAN SUMBU X 800 PERGERAKAN SUMBU Y 600 Gbsdpjw U T Szefx Alkol PERGERAKAN SUMBU Z 500 SPINDEL HSK E 50 KECEPATAN PUTAR SPINDEL 36.000 RPM PROBE PEKERJAAN PENGUKUR LASER MANUAL PENGOPERASIAN DAN PERAWATAN SERTIFIKASI CE CNC HEIDENHAIN iTNC 530 HANDWHEEL REMOTE MOTOR DAN PENGGERAK SIEMENS SISTEM PENGUKURAN GARIS OPTIK HEIDENHAIN TOTAL JAM OPERASI 6447 JAM SPINDEL 4651

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Gbedstqf Rzepfx Alkjl Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Universal milling machine Make: KUNZMANN Model: WF 650 Year of manufacture: 2007 Technical Data Manufacturer: Kunzmann Model: WF 650 Year: 2007 X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speeds: 5 - 6500 rpm Quill stroke: 60 mm Gbedjwhm S Nspfx Alkel Swiveling vertical head: +/- 90° Table load capacity: max. 400 kg Feed rates (longitudinal/cross/vertical): 0 - 4000 mm/min Rapid traverse: 25 / 25 / 20 m/min Distance table / vertical milling spindle: 100 / 550 mm Distance table / horizontal spindle: 270 / 720 mm Number of tool magazine stations: 20 Tool diameter: 95 mm Tool diameter at 2 adjacent free stations: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions (L x W x H): 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control - Operating manual - Enclosure - Vertical head with extendable quill - Hydraulic tool clamping - Fixed table - Electronic handwheel - Coolant system - Chip conveyor All information is provided without guarantee. A demonstration is possible at any time in our showroom.