EMCO MaxxTurn 65 SMY

EMCO MaxxTurn 65 SMY

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, on both main and sub spindle. State-of-the-art control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Spindle speed range: 0–5,000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Spindle speed range: 0–7,000 rpm Turret: • 12-position VDI 30 radial turret with directional logic for up to 12 live tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for both main and sub spindle Further features: • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant material detection • USB interface • Electrical cabinet air conditioning Dkjdpfx Agsx E Dncs Del • Enhanced coolant system incl. high-pressure coolant pump (24 bar) • Chuck wash with an additional pump (3.5 bar) • Part ejector and flushing through sub spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English • Electronic handwheel • EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE • Alternating spindle speeds • SUB SPINDLE AS TAILSTOCK: This cycle enables utilization of the sub spindle with a mounted live center to support workpieces, allowing shaft parts to be clamped and machined on machines without a tailstock using the sub spindle. Max. pressure force is limited to 50% of the maximum axis force. • EMCO PROFI-NET ROBOT INTERFACE for robot integration, with HARTING connector. Signal exchange via Profinet, safety signals 2-channel / potential-free. • Digitization package for Sinumerik. Condition monitoring. • SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard with the following information: - Machine on – AUX ON - Automatic mode - Production mode – program active - Program is running, override between 95-105% - Piece count impulse (M30) - Programmable impulse (M300) 3D MACHINE DATA / MT65-G2: 3D data model of the machine included. Pneumatically actuated finished part catcher for gentle unloading of finished parts, transport into a catch box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connecting the EMCO SL1200 short bar loader. ...etc. Machine available immediately!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Le posizioni degli utensili rotanti sono: T01-02-03-04 / T22-23 / T34-35 - dotata di caricatore di barre Iemca Boss 332E/32 installato nuovo nel 2006 - numerosi pinze e boccole di guida - controllo MSC-501 - la macchina ha sempre lavorato con olio. Dkedowpu Etjpfx Ag Dol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, ST-30Y-2019-Haas Dkjdpfeyzz Urex Ag Dsl

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Djdpfx Asuyk N Iog Dokl

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die von Hand gezeigten Teile sind nicht enthalten. Technische Details siehe Abbildung. Dkjdpjrpn Dvofx Ag Dol

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel path Z: 120 mm - Spindle speed: 7,000 rpm TOOL HOLDER 1 - Number of positions: 5 FRONT SLIDE UNIT - Number of positions: 3 COUNTER OPERATION - Number of positions: 3 ELECTRICAL SUPPLY Dkjdpfx Agsuhaw Ij Djl - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control unit: Fanuc - 3-color status indicator lamp - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, x-axis travel 185 mm z-axis travel 360 mm b-axis travel 460 mm Control unit Mazatrol 640 T Max. swing diameter 550 mm Max. turning diameter 280 mm Max. workpiece weight 200 kg Bar capacity 51 mm Main spindle speed 35–6000 rpm Milling spindle speed range 25–4500 rpm Rapid traverse X and Z axes 30/33 m/min Rapid traverse B axis 30 m/min Tool turret with 12 stations Machine weight approx. 4100 kg Capacity: Chuck size: 6 inch Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret face: 80–535 mm Main spindle: Rotation speed: 35–6000 rpm Spindle bore: 61 mm Sub-spindle: Rotation speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tool positions: 12 Tool sizes: - External turning tool: 20 mm - Internal turning tool: 32 mm - Milling drill: 16 mm - Thread milling cutter: M12 - End mill: 16 mm Milling spindle speed: 25–4500 rpm Features/Accessories: Dkodjyukf Sjpfx Ag Dol Tool holders Tools Driven tools Turning tool holders Coolant system Chip conveyor Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 5.500 h, Fungsionalitas: berfungsi sepenuhnya, de2hu-001 Dodpfx Aeyr I A Asg Dokl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, bearbeitungszentrum-posmill-h800u-2019 Dkedpfoyk Az Dox Ag Djl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, daya motor spindle: 13.000 W, kecepatan spindel (maks.): 6.300 rpm, jumlah sumbu: 2, en-GB Dsdpfxsyffgre Ag Dokl