Mesin cetak injeksi multi-material

ENGEL ES650H/200W-200HL-2F

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 63.929 h, gaya penjepit: 2.000 kN, produsen pengendali: ENGEL, model controller: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F injection molding machine was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, this machine ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F we have for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping unit: • Max. mold weight: 1,500 kg • Total weight: 3,000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1,150 mm • Opening stroke: 700 mm • Daylight opening: 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / Pneumatic • Number of core pulls: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Shot volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1,240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle aperture: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): Cjdsyf Htyepfx Aa Topw • Max. shot volume: 140 cm³ • Shot volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2,000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle aperture: 15 mm • Installed pump: approx. 6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Print interface: Yes • 2nd injection cylinder: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Part extraction device (robot): ERC 23/1-E • Travel axes: X = 500 mm, Z = 1,400 mm • Max. mold dimensions (Y-axis): 1,000 mm • Hot runner control: 18 zones • Mold sensor technology: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: Cpsdpfx Aaothd She Tow - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 96.194 h, gaya penjepit: 2.000 kN, diameter sekrup: 40 mm, berat injeksi: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen dimensions of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robot system for enhanced automation. Ideally suited for precision hydraulic injection molding. Please contact us for further information on this machine. • Configuration: 2K (two-component injection molding machine) • Clamping Unit: • Platen size (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN Cpsdpfx Ajyfrb Nja Tow • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 cm³ • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection Unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 cm³ • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: printer interface; process control included Additional Equipment • Robot System: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 98.780 h, gaya penjepit: 2.000 kN, berat keseluruhan: 12.200 kg, produsen pengendali: ENGEL, model controller: CC100, en-GB Csdpfeyf H Nnsx Aa Tspw

Kondisi: baik (bekas), Tahun pembuatan: 2000, Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Cpjdpferthkusx Aa Tew Shot weight: 127 g New ARB 777 temperature control board (cost: €2,750)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Arburg 270 M-350-90 U Cpjdpfjg S I S Ajx Aa Tsw Clamping force: 35 t Year of manufacture: 1997 Screw diameter: 25 mm Tie bar distance: 270 x 270 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Clamp force: 45 tons, tie-bar-less Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200 Csdpfxeh Rawbj Aa Tepw

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, nomor mesin/kendaraan: 1005/40200317/2010, warna: abu-abu, perfect machine in every detail, ready for immediate production use, consisting of: drawer-type extractor / 3 feeders, of which 1 with launching discs, 1 splittable for double insert feeding, 1 90-degree pivoting for inline insert feeding, glue applicator paired with electronic labeller for address insertion from 1-inch to 4-inch, with 2 to 4 channels, also compatible with bank statements, packaging unit equipped with film stretching device to minimize bag slack, product collection and counting stacker with side ejection, and mechanical product outfeed conveyor belt. Cpedpfsuxmlisx Aa Tow

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Clamping force: 600 kN, Weight: 9 t, Operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Cpjdpfsh Nypfjx Aa Tow

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Arburg Allrounder 420C 1000-350/150 Arburg Two-component injection moulding machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can also offer on-site commissioning to guarantee functionality. Extras include: Rotary platen, Geiger Robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR Vertical / 2120 BAR Horizontal Cpodpfop Audqex Aa Tew INJECTION VOLUME: Horizontal 182cm³ INJECTION VOLUME: Vertical 54cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOLD HEIGHT: 250 mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002