Mesin cetak injeksi

KraussMaffei Technologies GmbH KM 650 / 2000 / 2000 GXW G06

Injection molding machines directly from the manufacturer!

As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines:

The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining.

TECHNICAL DATA:
KM 650 / 2000 / 2000 GXW G06 (Order 38618339)

CONTROL SYSTEM
- MC 6 with 24” TFT color screen, multitouch functionality

CLAMPING UNIT
- Clamping force kN 6500
- Maximum mold opening force kN 455
- Daylight (H x V) mm 1110 x 960
- Mounting platen (H x V) mm 1540 x 1440
- Mold height (min. - max.) mm 1550 (without center platen)
- Maximum opening stroke mm 3200
- Maximum mold open distance mm 1650
- Maximum mold weight kg 22000

INJECTION UNIT 1 SP2000
- Screw diameter / type mm 60 / Thermoplastic
- Effective L/D ratio 23.3
- Injection pressure bar 2420
- Shot volume cm³ 792
- Shot weight (max. stroke, PS) g 720
- Injection speed mm/s 140
- Injection flow rate cm³/s 396
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 72.2
- Nozzle contact force kN 82

INJECTION UNIT 2 SP2000
- Screw diameter / type mm 70 / Thermoplastic
- Effective L/D ratio 20
- Injection pressure bar 1877
- Shot volume cm³ 1078
- Shot weight (max. stroke, PS) g 981
- Injection speed mm/s 140
- Injection flow rate cm³/s 539
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 98.3
- Nozzle contact force kN 82

ELECTRICAL PARAMETERS
- Connected load kW 341
- Power supply V / Hz 400 / 50 3-phase with neutral conductor

WEIGHT AND DIMENSIONS
- Net weight t 43.5
- Length x width x height m 11.89 x 3.22 x 2.77

ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- BluePower ServoDrive
- Pneumatic valve 1-fold (BWAP), 1-fold (FWAP)
- Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP)
- Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP)
- Mold heating 96-fold (3.5 kW each)
- Euromap interface for handling E18
- Euromap interface (central computer) E67, E77, E78, E63, E82.1
- Adaptive Process Control (APC+)
- Graphics analysis package
- Sliding table with servo-driven turning unit
- Vertical center platen
- Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen
- ColorForm interface: signal interface for connection of an RPM system
- Electrical interface for HRS-Flexflow system
- Electrical interface and hydraulic valves for “1-K Dummy Operation”
- Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation

The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request.

We look forward to your inquiry.
Hfedow U N Ixepfx Aazek

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.