Engel ES650H/200W-200HL-2F

Engel ES650H/200W-200HL-2F

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 63.929 h, gaya penjepit: 2.000 kN, produsen pengendali: ENGEL, model controller: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F injection molding machine was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, this machine ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F we have for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping unit: • Max. mold weight: 1,500 kg • Total weight: 3,000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1,150 mm • Opening stroke: 700 mm • Daylight opening: 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / Pneumatic • Number of core pulls: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Shot volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1,240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s Hnodpfx Ageyf Htyo Roi • Nozzle aperture: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Shot volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2,000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle aperture: 15 mm • Installed pump: approx. 6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Print interface: Yes • 2nd injection cylinder: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Part extraction device (robot): ERC 23/1-E • Travel axes: X = 500 mm, Z = 1,400 mm • Max. mold dimensions (Y-axis): 1,000 mm • Hot runner control: 18 zones • Mold sensor technology: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Hnjdpfx Aothd Shog Rji Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 96.194 h, gaya penjepit: 2.000 kN, diameter sekrup: 40 mm, berat injeksi: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen dimensions of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robot system for enhanced automation. Ideally suited for precision hydraulic injection molding. Please contact us for further information on this machine. • Configuration: 2K (two-component injection molding machine) • Clamping Unit: • Platen size (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm Hnjdpfx Ageyfrb No Rei • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 cm³ • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection Unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 cm³ • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: printer interface; process control included Additional Equipment • Robot System: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection moulding machine with robot Manufacturer: ENGEL Hnedeyak A Iopfx Ag Roi Type: ES650H/200W-200HL-2F Year of manufacture: 2004 Clamping force: 200 tons Tie bar spacing: tie-barless Min. installation height: 500 mm Opening stroke: 750 mm Screw diameter 1: 40 mm Max. shot volume: 251 cm³ Shot weight in PS: 216 g Screw diameter 2: 25 mm Max. shot volume: 69 cm³ Shot weight in PS: 60 g Control system: CC100 Technical features: - Engel robot, type: ERC23/1-E - 4 core pullers - Rotary table control

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Hnedpfx Agsz N Amo Rji Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Kondisi: baru, Jarak antar pusat ----- 1000 mm Tinggi pusat ----- 180 mm Diameter putar ----- 360 mm Lubang poros utama ----- 40 mm Lebar alas ----- 260 mm Kecepatan spindle ----- 40-1800 rpm Motor ----- 2,4 KW Hnjdpfx Agjga Ty Eo Rei Berat ----- 1350 kg INCLUDE * Pembacaan digital 3 sumbu merek SINO * Dudukan pahat quick-change tipe Multifix TOOE5 dengan 4 slider * Chuck 3 rahang 200 mm * Chuck 4 rahang 200 mm * Pelat penjepit 250 mm * Lampu kerja LED dan sistem pendingin * Steady rest dan follow rest KONSTRUKSI BERAT DENGAN RANGKA BESI COR

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Arburg Allrounder 420C 1000-350/150 Arburg Two-component injection moulding machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can also offer on-site commissioning to guarantee functionality. Extras include: Rotary platen, Geiger Robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR Vertical / 2120 BAR Horizontal INJECTION VOLUME: Horizontal 182cm³ INJECTION VOLUME: Vertical 54cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOLD HEIGHT: 250 mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002 Hodpfxop Audqj Ag Rsni

Kondisi: baik (bekas),

Tahun pembuatan: 2003, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 50/140/03, GENERAL SPECIFICATIONS Grinding Wheel Dimensions (OD x ID x width): 508 mm Regulating Wheel Width: 254 mm Dressing Speed: Ø508 x 254 mm Hnsdpfod Nw T Iex Ag Rei Lubrication (Auto/Manual): Centralized automatic CNC Brand: FANUC CNC Model: Series 18i - T Number of CNC Axes: 8 Grinding Wheel Width: 254 mm ELECTRICAL SPECIFICATIONS Total Power: 25 kW Voltage: 220/380 V DIMENSIONS AND WEIGHT Length: 2150 mm Width: 2200 mm Height: 3400 mm Weight: 8000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 330/80 HLS Hjdopdr Aiepfx Ag Rsni Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged mounting platen: 660 x 560 mm Minimum mold height: 200 mm