Engel Victory 750/220 spex (2017) hanya 6.000 jam

Engel victory 750/220 spex

ENGEL Victory 750/220 SPEX – Technical Data

Machine designation: VICTORY 750/220 SPEX

Plasticizing unit 1:

1. Screw diameter (standard): 45 mm
2. Available screw diameters: 40 / 45 / 50 / 55 mm
3. Screw stroke: 200 mm
4. Max. injection volume: 318 cm³
5. Screw speed: 230 min⁻¹
6. Plasticizing rate (3-zone screw): 24.2 g/s
7. Plasticizing rate (barrier screw): 30.1 g/s

Injection unit 1:

1. Injection rate: 229.0 cm³/s
2. Injection pressure (regenerative): 1760 bar
3. Injection pressure (max): 2360 bar

Nozzle 1:

1. Nozzle stroke: 350 mm
2. Nozzle contact force: 67.2 kN

Plasticizing unit 1:

1. L/D ratio: 20.0
2. Heating zones including nozzle: 5
3. Heating capacity: 13.4 kWel

Clamping unit:

1. Clamping force: 2200 kN
2. Opening stroke + cylinder tolerance: 759 mm
3. Minimum mould height: 300 mm
4. Maximum platen distance: 1050 mm
5. Platen size horizontal × vertical: 880 × 830 mm
6. Clearance between tie-bars: 650 mm
7. Maximum mould weight, moving platen: 1500 kg
8. Maximum mould weight, fixed platen: 1500 kg
Njdpfx Aex Ely Teglocl
9. Maximum total mould weight: 3000 kg
10. Dry cycle stroke: 250 mm
11. Dry cycle time: 2.00 s

Ejector:

1. Ejector stroke: 180 mm
2. Ejector force: 80.0 kN

Drive unit:

1. Oil tank capacity – injection unit: 330 l
2. Oil tank capacity – clamping unit: 210 l

Oil filter / oil cooler:

1. Cooling capacity standard (25 °C inlet water): 12.0 kW
2. Water consumption, oil cooler 25 °C: 1.00 m³/h
3. Water consumption, oil cooler 32 °C: 2.10 m³/h

Machine data:

1. Total weight (without oil): 12.2 t
2. Total connected load: 72.0 kW

1. Hydraulic drive variant HV1 (standard)
2. Microcomputer CC300
3. 6-fold flow controller, 0–10 l/min

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.