Ketel uap

ENKOTHERM ADN-29-8,0-SG271

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Nedpfow Sy T Hsx Ahwowc Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Set of Rapid Steam Generators - Jumag Comprising 3 rapid steam generators including water softening unit and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year of manufacture: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Nwedpfxown H Auj Ahwoc Gas burner: Weishaupt WG30N/1-C Year of manufacture: 2002

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-approved up to 140 mm round log corner joints Sawing: 1x Njdpjvwfqqefx Ahwswc Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Tahun pembuatan: 1996, Kondisi: bekas, Incubator with temperature control up to approx. 80°C, with internal dimensions of approx. 400 x 500 x 350 mm Nwjdpsbylq Hsfx Ahwoc

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm Nsdsirax Uopfx Ahwowc - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), Mekanisasi untuk di depan mesin serut untuk KVH/BSH – untuk panjang hingga sekitar 13 m. Instalasi KVH+BSH ideal untuk di depan mesin serut. Pemisahan memanjang – pemisahan satu per satu. Gergaji potong melintang: 4 buah gergaji bundar yang dapat disetel samping. Penampang potong: 180 x 220 mm, 150 x 300 mm. Satu operator sudah cukup. Nwodsvbtpopfx Ahwjc

Tahun pembuatan: 1988, Kondisi: baik (bekas), nomor mesin/kendaraan: 14684/1, suitable for recycling copper cables and plastics Nsdpfx Aonvdq Nehwjwc

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas 3 ember masing-masing 800 kg Nodpfexd H Itjx Ahwjwc

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Nwodpfx Ajwtgcxjhwjc Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: bekas, Tahun pembuatan: 2006, de1 Nwedovguhkepfx Ahwoc