Pusat pemesinan - Universal - Sumber suku cadang

MIKRON HSM 400 U

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), MIKRON HSM 400 U High-Speed Machining Centre The exact scope of delivery is shown in the photo series. Included, among others: probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Working Area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool interface: HSK E 40 Spindle power at 40 % duty cycle: 13 kW Rodeigrf Ispfx Adcsch Spindle power at 100 % duty cycle: 10 kW Torque at 60 % duty cycle: 4.25 Nm Torque at 100 % duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter for 360° rotation: 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8153336470, berat keseluruhan: 616 kg, laju aliran volumetrik: 399 m³/jam, tekanan (min.): 4 batang, tekanan (maks.): 13 batang, tingkat kebisingan: 67 dB, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, We are a company specializing in the compressed air industry for over 20 years. Our professional service level and the high-quality products we offer—market-proven—guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed drive, with integrated dryer). This machine is equipped with a frequency inverter (VSD), built with the latest technologies, which translates into greater efficiency and performance: - On average, 20% lower specific energy consumption (SER) than previous GA VSD series models. - The eco-friendly and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models operating on idle. - Additionally, performance increase (FAD) of up to 12% regardless of energy savings. - Efficient fan motor (ERP 2015 compliant) reduces energy usage and noise level. - The highest efficiency iPM motor (up to 94.5%), exceeding IE3 efficiency levels. Built to work hard for your success. The GA series oil-injected rotary screw compressors provide market-leading efficiency, high productivity, and low maintenance costs—even under the toughest conditions. Technical Data: Rcsdpfxowlp Hdj Adceh - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m3/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m3/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m3/min - Max pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Motor with internal permanent magnets (iPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain with zero compressed air loss - Elektronikon controller - Inlet valve - VSDs module - OEM code: 8153336470 If you are unsure whether this machine is suitable for you, or can’t find the right compressor, CALL US! We can advise you on choosing the right equipment. Feel free to check out our full product range.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 4.450 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 240 mm, jarak gerak sumbu Z: 360 mm, kecepatan pemakanan sumbu X: 60 m/menit, laju pemakanan gandar Y: 60 m/menit, laju pemakanan sumbu Z: 60 m/menit, produsen pengendali: Heidenhain, model controller: iTNC530i, beban meja: 25 kg, kecepatan rotasi (min.): 250 rpm, kecepatan spindel (maks.): 42.000 rpm, jam operasional spindle: 4.400 h, pasokan pendingin: 4 batang, jumlah spindel: 1, jumlah slot dalam magazin alat: 66, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Mesin frais HSC HSM 400 U LP Spindel frais Steptec 42.000 U/men, usia 2 tahun Kontrol termal ITC & ITCX 5 sumbu Pengontrol Heidenhain TNC530i Majalah perkakas 66X HSK40E Rcodpfx Aszzknxodcsh Meja putar ITS 148 Pelumasan jumlah minimal Penyedot kabut oli Konveyor serpihan spiral, Pabrikan Phoenix Metall Penukar panas air/air Pengukur sentuh inframerah, Pabrikan M&H 40.01 TX/RX Majalah palet 20 x ITS 148 Air pendingin dan udara dapat disalurkan dari luar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, model controller: iTNC Heidenhain 530, kecepatan spindel (maks.): 42.000 rpm, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, No reserve price – guaranteed sale to the highest bidder! The offer comprises 2x 5-axis HSC machining centres + pallet system with robot MIKRON HSM 600 U (Serial No.: 217.88.00.070) TECHNICAL DETAILS Travels X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / −110° C-axis rotation range: 360° C-Axis Rotary table rotation range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): max. 217 Nm Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / −110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load: max. 120 kg Tool magazine: 68 stations Control: iTNC Heidenhain 530 Workpiece weight: max. 120 kg EQUIPMENT Swivelling rotary table with Erowa UCP MIKRON HSM 400 U (Serial No.: 217.87.00.178) TECHNICAL DETAILS Travels X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Rotary table rotation range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): max. 217 Nm Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): max. 686 Nm Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load: max. 25 kg Tool magazine: 36 stations Control: iTNC Heidenhain 530 EQUIPMENT Swivelling rotary table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Rjdpfx Asx Hx T Aodcech Storage system Rotary store: 5 levels Storage allocation: Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Linear scales on all axes Infrared measuring probe LASER Setup mode with electronic handwheel Graphite extraction 2x BURN WK 5806 Rotary pallet magazine

Kondisi: baik (bekas), kedalaman pengeboran: 1.500 mm, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 1.300 mm, panjang umpan sumbu Z: 1.500 mm, Hersteller: TBT Tiefbohrtechnik Modell: BW 250-S Steuerung: SIEMENS 840D Baujahr: 2007 Bohren, Fräsen und Gewindeschneiden für Wärmetauscherböden und -platten Schwenkbare A-Achse: +25 bis -15 Grad Filtrations- und Kühlsystem: 1.000 Liter Späneförderer: 2.000 x 1.200 mm Auswurfhöhe Fräswerkzeug-Wechselsystem Tower Station mit 20 Werkzeugplätzen ELB-Bohrkapazität: 3 - 35 mm Fräskapazität: 250 cm³/Min Verfahrwege aller Achsen: 15.000 mm/Min (X-Y-W-Z) Maschine im Betrieb: ca. 15.000 Spindelstunden Umfangreiches Werkzeugpaket Technische Daten Max. Bohrdurchmesser (Stahl): 40 mm Bohrtiefe: 1.500 mm X-Achse: 2.000 mm Y-Achse: 1.300 mm Z-Achse: 1.500 mm W-Achse: 750 mm Tischbelastung: 15.000 kg Tischabmessung (L x B oder Durchmesser): 1.600 x 1.200 mm Spindelaufnahme: HSK 63 Mk Spindelleistung: 11 kW Drehzahl: 8.000 U/min Abmessungen (ca.): Rodpov A Uw Djfx Adcjch Länge: 7.200 mm Breite: 7.800 mm Höhe: 4.250 mm Gewicht: 23.000 kg Bitte beachten Sie: Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen von uns und, so weit möglich, vom Hersteller bezogen. Die Informationen werden in gutem Glauben bereitgestellt, jedoch kann für die Richtigkeit keine Gewähr übernommen werden. Eine vertragliche Zusicherung oder Garantie kann daraus nicht abgeleitet werden. Wir empfehlen Ihnen, alle wichtigen Details separat zu überprüfen.

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, lebar total: 1.650 mm, panjang total: 4.900 mm, tinggi total: 1.800 mm, berat keseluruhan: 3.900 kg, Grinding length 1500 mm Centre height 180 mm Machine weight approx. 3.9 t Rcjdpfx Ajwm Rqgodcjh Required space approx. L: 4900 x 1650 x 1800 mm

Kondisi: bekas, Tahun pembuatan: 2018, 3D printer Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-Theta precision lens Build volume: Ø 100 mm x 100 mm Redpfsvtftqsx Adcech Reservoir volume: Ø 200 mm x 200 mm Coater: Rotationally guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Kondisi: sangat baik (bekas), Motor-driven rotary sliding table Rcedpfx Adsif Rlbjcjh Stepless rotary table (indexing 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping area: 1600 mm x 1600 mm Longitudinal travel, W-axis: 1000 mm Condition: Very good (used)

Kondisi: bekas, Tahun pembuatan: 2002, Cocok untuk penggerindaan otomatis berbagai jenis perkakas. Aksesori: Pelindung penuh Sistem penyaringan pita Knoll E53319 Perangkat lunak Simulasi Numroto-3D, Perangkat lunak Pemeriksaan tabrakan Numroto-3D, Perangkat lunak Pembuat bentuk perkakas Numroto, Pemuat palet Roda tangan CNC Pendingin lemari kontrol, kepala lepas otomatis pelumasan pusat otomatis Penggaris kaca pada sumbu linier X, Y, Z Probe pengukuran penjepit benda kerja hidraulik Wadah penampung oli 2 palet pemuat, 1 dudukan cakram gerinda, Jarak perjalanan sumbu X: 800 mm Jarak perjalanan sumbu Y: 270 mm Jarak perjalanan sumbu Z: 660 mm Jarak perjalanan sumbu B: 400° Kecepatan cepat: 30/15/30 m/menit Kerucut dudukan perkakas: ISO 50 Daya penggerak spindel gerinda: 12 kW Kecepatan spindel gerinda variabel: maks. 9000 RPM, Diameter cakram gerinda: maks. 203 mm Nilai sambungan kira-kira: (400 V / 50 Hz) Dimensi P x L x T: 1900 x 2300 x 2300 mm Berat kira-kira: 5400 kg Warna: Abu-abu / Kuning Rjdpfeyv Hv Rox Adcoch

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 10.550 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, torsi: 84 Nm, produsen pengendali: Heidenhain, model controller: iTNC530, berat benda kerja (maks.): 1.200 kg, lebar meja: 600 mm, panjang meja: 1.400 mm, beban meja: 1.200 kg, kecepatan spindel (maks.): 20.000 rpm, jam operasional spindle: 10.550 h, pasokan pendingin: 70 batang, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Dijual mesin Mikron HPM 1200 HD tahun pembuatan 2011 yang terawat dengan baik, dilengkapi dengan kontrol Heidenhain iTNC530. Rentang pergerakan: X: 1200mm Y: 600mm Z: 500mm Peralatan: Dimensi meja: 1400 x 600mm Kapasitas beban meja: 1200kg Kontrol: Heidenhain iTNC530 Konveyor serpihan Pemasangan spindel: HSK-A63 Kecepatan spindel: 20000 RPM Pengubah alat: 60 posisi Roda tangan elektrik Pengukuran alat Redpfx Aszkbr Tsdcech Probe pengukuran 3D IKZ 70 bar Berat: 15 ton Aksesori: 20 buah pemasangan alat HSK-A63 2 buah penjepit Dokumentasi lengkap Kaki mesin Mesin dapat diperiksa dan diuji dalam kondisi menyala setelah perjanjian waktu sebelumnya.