Beli Mikron Hsm 400 U bekas (190)

Kondisi: baik (bekas), Tahun pembuatan: 2006, 1. DATA TEKNIS Area kerja Sumbu X: 400 mm Sumbu Y: 450 mm Sumbu Z: 350 mm Sumbu B: +-110 ° Sumbu C: 360 ° Spindle kerja Rentang kecepatan: 100 - 42.000 rpm Pengikat alat: HSK E 40 Daya spindle pada 40 % ED: 13 kW Daya spindle pada 100 % ED: 10 kW Torsi pada 60 % ED: 4,25 Nm Torsi pada 100 % ED: 3,2 Nm Pelumasan: oli/udara Kecepatan makan Kecepatan travers cepat: Maks. 40 m/menit Sumbu B: 150 rpm Sumbu C: 250 rpm Akselerasi sumbu XYZ: Maks. 1g (10 m/s2) Sumbu B: 100 rad/s2 Sumbu C: 300 rad/s2 Penukar alat: 68 posisi Waktu dari chip ke chip: 12,5 dtk Waktu pergantian alat: 10,0 dtk Kdedpfx Akex H Ntas Hsl Meja kerja: 120 mm Diameter benda kerja maksimum yang dapat diputar 360°: 230 mm Tinggi benda kerja maksimum: 350 mm Berat benda kerja maksimum: 25 kg Kontrol: Heidenhain iTNC 530 Bobot: 5.500 kg

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), MIKRON HSM 400 U High-Speed Machining Centre The exact scope of delivery is shown in the photo series. Included, among others: probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Working Area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool interface: HSK E 40 Spindle power at 40 % duty cycle: 13 kW Spindle power at 100 % duty cycle: 10 kW Torque at 60 % duty cycle: 4.25 Nm Torque at 100 % duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter for 360° rotation: 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Kdsdpfeigrf Ijx Ak Hjl Control: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Kondisi: bekas, mash-001 Kdsdpfx Asyzt A Ujk Hsl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, model controller: iTNC Heidenhain 530, kecepatan spindel (maks.): 42.000 rpm, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, No reserve price – guaranteed sale to the highest bidder! The offer comprises 2x 5-axis HSC machining centres + pallet system with robot MIKRON HSM 600 U (Serial No.: 217.88.00.070) TECHNICAL DETAILS Kdodpfx Aox Hx T Aok Hel Travels X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / −110° C-axis rotation range: 360° C-Axis Rotary table rotation range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): max. 217 Nm Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / −110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load: max. 120 kg Tool magazine: 68 stations Control: iTNC Heidenhain 530 Workpiece weight: max. 120 kg EQUIPMENT Swivelling rotary table with Erowa UCP MIKRON HSM 400 U (Serial No.: 217.87.00.178) TECHNICAL DETAILS Travels X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Rotary table rotation range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): max. 217 Nm Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): max. 686 Nm Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load: max. 25 kg Tool magazine: 36 stations Control: iTNC Heidenhain 530 EQUIPMENT Swivelling rotary table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary store: 5 levels Storage allocation: Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Linear scales on all axes Infrared measuring probe LASER Setup mode with electronic handwheel Graphite extraction 2x BURN WK 5806 Rotary pallet magazine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, kecepatan rotasi (maks.): 42.000 rpm, kecepatan spindel (maks.): 42.000 rpm, daya motor spindle: 12.000 W, Perlengkapan: dokumentasi / manual, 1168195 Ksdpfxey Tvzqe Ak Hedl

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, torsi: 46 Nm, produsen pengendali: HEIDENHAIN, model controller: 530, hidung spindel: HSK A 63, jumlah slot dalam magazin alat: 170, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, cnc-itnc530-en Kodpfsy Tam Rox Ak Hedl

Kondisi: bekas, Tahun pembuatan: 2017, fräszmasch-001 Kodpfxjym Rr Ao Ak Hjdl

Kondisi: sangat baik (bekas), Number of pallets: 18 Kjdpfx Akeilp Eue Hsdl Load capacity: 25 kg Maximum workpiece height: 350 mm Maximum workpiece diameter: 230 mm Various accessories MARCELS MASCHINEN AG

Kondisi: bekas, Tahun pembuatan: 2001, tinggi total: 2.800 mm, panjang total: 2.300 mm, lebar total: 2.400 mm, berat keseluruhan: 6.500 kg, The Mikron HSM 400 is a high-precision high-speed machining center featuring a STEP-TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40. Spindle Hours: 26,897 h Manufacturer: Step-Tec AG (Switzerland) Spindle Type: HVC140-SB-10-15/42-3F-HSK-E40 Tool Interface: HSK-E40 Maximum Speed: 42,000 rpm Power Output: 13 kW (40% duty cycle), 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle), 3.2 Nm (100% duty cycle) Lubrication: Oil-air lubrication system Axis Drives and Dynamics Drive System: AC servomotors with ball screw drives Feed Rate (X/Y/Z): 0–40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Rotary Axis Performance Data B-Axis: up to 54,000 °/min C-Axis: up to 90,000 °/min Tool System Tool Holder: HSK-E40 Tool Magazine: 18 / 36 / 68 tools depending on configuration Kdodpfxsy Tkdys Ak Hol Tool Change Time: approx. 10 s Chip-to-Chip Time: approx. 12.5 s Pallet and Clamping System Erowa UPC pallet system: 320 × 320 mm Workpiece Data Maximum Workpiece Weight: up to 200 kg Machine Application The Mikron HSM 400 is designed for ultra-precise machining of complex parts and is commonly used in mould and die making, medical technology, micro-machining, and precision manufacturing where the highest standards for surface quality and dimensional accuracy are required. Weight approx.: 6,500 kg CNC Control: Heidenhain TNC 430 M Dimensions (LxWxH) approx.: 2300 x 2400 x 2800 mm Travel – Y-Axis: 240 mm Travel – Z-Axis: 350 mm Travel – X-Axis: 400 mm Year of Manufacture: 2001 Condition: Fully functional Payment Terms: 100% advance payment before pickup Delivery Terms: Loaded free on truck Under Power: No

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 22.032 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 910 kg, jumlah sumbu: 5, This 5-axis MIKRON HSM600U was manufactured in 2004. It features an impressive X-axis travel of 800 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 500 mm. The machine is equipped with a high-speed spindle capable of reaching up to 36,000 revolutions per minute, and a tool magazine with a capacity of 60 positions. If you are looking for high-quality machining capabilities, you should consider the vertical machining center MIKRON HSM600U that we offer for sale. It is fitted with a pallet changer. Contact us for further details. • Tool magazine capacity: 60 positions • Coolant system: Coolant through spindle (IKZ) • Lubrication: Minimum quantity lubrication (MQL) • Electrical: 400 V, 50/60 Hz, 4 kVA, 5.7 A (full load) • Condition note: Delivered without tools, pallets, and vises (available separately) • Program run time: 35,982 h • Spindle hours: 22,032 h Additional Equipment • 6-position pallet changer • Table system: Delphin system (System 3R) • The following materials have been machined on this unit: • Aluminum • Steel • Non-ferrous metals • Plastics • Hardened steel • The following components have been replaced/repaired: • Several power components, up to the throttle valve replacement • Y-axis cover (2x) Kdjdpfsyly Scox Ak Hjl • X-axis cover • X-axis ball screw bearing • Coolant pump motor • Several proximity sensors • 2x hydraulic pressure sensors • 1x hydraulic hose • As this unit was a serial version, it was retrofitted with central lubrication • 2x 3R clamping system maintenance kits • Including clamping tables Technical Specification Taper size: HSK 50

Kondisi: bekas, Tahun pembuatan: 2010, x-Weg 800 mm y-Weg 600 mm z-Weg 500 mm Steuerung Heidenhain iTNC 530 Ksdpjy Ay Itjfx Ak Hedl Maschinengewicht ca. 8300 kg

Kondisi: bekas, Tahun pembuatan: 2007, tinggi total: 2.800 mm, panjang total: 3.000 mm, lebar total: 2.500 mm, berat keseluruhan: 8.300 kg, Mikron HSM 800 – High-Speed Machining Center Year of manufacture 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-fold pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, engineered for demanding HSC machining in tool and mold making, graphite and electrode applications as well as flexible serial production. Travel distances of X 800 mm / Y 600 mm / Z 500 mm with a pallet size of 800 x 600 mm. Equipped with a 3-fold pallet changer for efficient production processes. The machine features a high-speed spindle up to 24,000 rpm, HSK-A63 spindle interface, and a 50-tool changer. Comprehensive equipment including high-pressure through-spindle coolant system (18–70 bar) with belt filter, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating inspection window and measuring system (M&H). Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) to maximize process reliability and thermal stability. Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Z-axis travel: 500 mm X-axis travel: 800 mm Weight approx.: 8,300 kg Control: Heidenhain iTNC 530 Clamping area dimensions: 900 x 600 mm Kodpfx Ajy Tkc Ajk Hjdl Y-axis travel: 600 mm Year of manufacture: 2007 Condition: fully functional Payment terms: 100% payment in advance prior to collection Delivery terms: from foundation Under power: Yes

Kondisi: bekas, Tahun pembuatan: 2017, fräsmaschinen-parameter-2024 Kodpfx Akjym Rrvo Hodl

Kondisi: sangat baik (bekas), MIKRON HPM 800 U ist ein 5‑Achsen Bearbeitungszenter für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 630×440 mm, 5 T‑Nuten, Last 800 kg; Verfahrwege X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, Abstand 600 mm; 115 Werkzeuge, Ø max 80 mm (160 frei), L 350 mm. 0–20000 t/min; Vorschub 0–20000 mm/min; Eilgang 45 m/min; Beschl. 6 m/s; Vorschubkraft 6000 N; 3×400V 50Hz; 55 kW; Gewicht ~15000 kg; Abm. 3505×3100×2980 mm. Zubehör: Hochdruckkühlung, Papierfilter, 2 Paletten, Werkstücktaster, Laser Werkzeugkontrolle, Späneförderer. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau Kdjdpfjyxn E Sjx Ak Hsl

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, kecepatan spindel (maks.): 36.000 rpm, jam operasional spindle: 4.651 h, hidung spindel: HSK 50, jumlah spindel: 15, Perlengkapan: Penandaan CE, dokumentasi / manual, PUSAT MESIN VERTIKAL MIKRON MODEL HSM 800 PERGERAKAN SUMBU X 800 PERGERAKAN SUMBU Y 600 PERGERAKAN SUMBU Z 500 SPINDEL HSK E 50 KECEPATAN PUTAR SPINDEL 36.000 RPM PROBE PEKERJAAN PENGUKUR LASER MANUAL PENGOPERASIAN DAN PERAWATAN SERTIFIKASI CE CNC HEIDENHAIN iTNC 530 HANDWHEEL REMOTE MOTOR DAN PENGGERAK SIEMENS SISTEM PENGUKURAN GARIS OPTIK HEIDENHAIN Kjdpfxjw U T Sze Ak Hedl TOTAL JAM OPERASI 6447 JAM SPINDEL 4651

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 Mikron HSM 800 CNC machining center with 4-position pallet pool Year of manufacture: 2007 Travel X/Y/Z: 800 mm x 600 mm x 500 mm Control: Heidenhain iTNC 530 60-position tool changer Spindle: HSK 50 E, 36,000 rpm 4-position pallet changer, pallets: 800 mm x 400 mm Table chuck Infrared measuring probe PS 32 electronic handwheel chip conveyor coolant supply Kodpfxsvup Sgj Ak Hodl laser tool measurement system spindle cooling unit

Kondisi: belum diuji (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: UCP 1000, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: Siemens 828D, de-01 Ksdpfx Akjyz Tnwo Hodl

Kondisi: baik (bekas), tsf-3ur5-romarsh-10kva Ksdjy Tv Svjpfx Ak Hsdl

Kondisi: baik (bekas), tsc1 Kdjdpfsy Tvttsx Ak Hel

Kondisi: bekas, Tahun pembuatan: 1998, X-axis travel 710 mm y-axis travel 630 mm z-axis travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 - 6300 rpm Spindle power 11 kW Number of tool magazine positions 2 x 22 Control HEIDENHAIN, TNC 426 Total connected load 20 kW Machine weight approx. 5.8 t Kdsdpfx Akstz Sqhj Hol Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 107.32.99.158, de-to-hu-it-lt Kedpoy Tnhpefx Ak Hsdl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WPC YEAR OF MANUFACTURE 2012 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVELS X 600 Y 450 Z 450 B +45º/-120º C n x 360º SPINDLE 20,000 RPM 36 KW HSK-A63 (NEW) LINEAR SCALES IN X,Y,Z 220-TOOL TOOL CHANGER 7-PALETTE DYNAFIX PALLET CHANGER 280 x 280 MM TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT Kedpfjy Twccex Ak Hodl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, mikron-hpm-450u-5-ejes-2014 Ksdpfx Akey Twa Us Hjdl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, centro-de-mecanizado-a-5-ejes-mikronhpm-1350u-tripalet-ano-de-fa bricacion-2011 Kjdpfxsy Tv Nbo Ak Hedl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Heidenhain TNC 407 SK 40 air/water cooling Tool changer with 22 positions Travel paths 600x500x450 mm Spindle speeds 5–5000 rpm Feed rate 0–10000 mm/min Kdedogydn Iopfx Ak Hel Main spindle drive power 6 kW