Unit Ekstraksi Bergerak / Penyedot Debu Bergerak

ESTA WHISPERSOG 3.0 FM

Kondisi: bekas, Tahun pembuatan: 2021, berat keseluruhan: 200 kg, tegangan masuk: 400 V, lebar total: 800 mm, panjang total: 1.350 mm, tinggi total: 1.500 mm, laju aliran volumetrik: 216 m³/jam, kebutuhan tinggi: 1.500 mm, lebar yang dibutuhkan: 800 mm, persyaratan ruang panjang: 1.350 mm, luas filter: 2 m², tekanan negatif: 31.500 Pa, daya: 3 kW (4,08 hp), tinggi transportasi: 1.500 mm, panjang transportasi: 1.350 mm, lebar transportasi: 800 mm, kapasitas tangki: 80 l, 04520 Mobile Extraction Unit / Mobile Deduster ESTA WHISPERSOG 3.0 FM Unused, year of manufacture 2021, in mint condition Nsdpfxjylb Ixs Afvslf Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high-vacuum cleaners operate more quietly than conventional industrial vacuum cleaners while maintaining the same power. They are designed for continuous operation and can be used not only as industrial vacuums, but also as mobile dust extractors for direct connection to machines. By using long-life filter cartridges, operating costs can be significantly reduced compared to disposable filters. Dust can be easily disposed of via the patented tilting device. Areas of application: Removal of coarse, fine, and free-flowing dust during cleaning tasks / direct extraction at machines in continuous operation Drive power: 3 kW Electrical connection: 400 V Maximum vacuum: 31,500 Pa Maximum airflow: 216 m³/h Extraction connection diameter: 50 mm Filter surface: 2 m² Dust collection container: 80 liters Volt-free contact for automatic activation when machine starts Includes power cable with 16 A plug, cable for volt-free connection and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm (LxWxH) Weight approx. 200 kg To avoid possible misunderstandings, inspection on site is possible and recommended by appointment Sale takes place as is Technical information, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "bought as seen" Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex stock

Tahun pembuatan: 2024, Kondisi: baru, Profilwagen zur Beförderung und Lagerung von Profilen in vertikaler Position COMALL CARR 300 Q, neu Technische Daten: - 10 Fächer mit Arbeitsmaß 128 mm Nledjf Nk H Hopfx Afvsf - Kontaktflächen mit kratz- und stoßfester Kunststoffbeschichtung - 4 Lenkrollen Ø 125 mm, davon 2 mit Feststeller - Arme in 5 verschiedenen Positionen verstellbar - Auflagetisch mit Gummibeschichtung - Tragfähigkeit: 650 kg

Kondisi: baru, Tahun pembuatan: 2025, Modern, powerful & universal double miter saw for wood, aluminum, and plastic profiles. Warehouse machine: Subject to prior sale - Large cutting range (165 mm cutting depth at table level) - Double cuts possible - Intermediate angles can be continuously fixed - Pneumatic pivoting as standard - Hydropneumatic saw feed, infinitely adjustable - Torsion-resistant machine bed - Swivel range on both units: 22.5° inward, 90°, 135° outward Nlodpfx Afexta Tuovef - Precision-ground saw table / saw mounting plate - Direct measuring system (magnetic sensor) in all versions - JETTER drives and control system - 15" industrial touchscreen panel (IP65)

Kondisi: baru, Mesin pemasang paku rel kaca Ruchser "2 P Jumbo automatic E.C." - baru - Keunggulan Anda: - Sambungan sudut tertutup rapat - Tidak ada celah rel kaca yang terbuka - Tidak ada perbedaan warna saat pengecatan - Rangka rel kaca mudah diposisikan Mesin penyambung sudut dengan klip 2P Jumbo Automatic E.C. untuk memasang klip pada rangka rel kaca. Pilihan antara pengoperasian otomatis dan manual; Dilengkapi dengan penyangga sudut, mekanisme penjepit dari atas dan depan Tekanan dapat diatur secara terpisah. Pemasangan klip paralel dan bertumpuk dimungkinkan melalui kontrol pemrograman elektronik. Mesin pemasang klip dapat dipasang pada meja kerja yang sesuai, Pengoperasian melalui pedal kaki. ----- Harga untuk konfigurasi ini tersedia berdasarkan permintaan! Ditambah pajak pertambahan nilai (PPN) dan biaya pengemasan/pengiriman ----- Nsdpfxsvnh T Nj Afvolf Gambar menunjukkan mesin penyambung sudut dengan klip 2P dengan opsi meja kerja yang dapat digerakkan (lihat detail di bawah "Harga Tambahan") Harga Tambahan: ----- Meja kerja yang dapat digerakkan ketinggian dapat diatur dari 700 - 1000 mm, 2 buah penyangga yang dapat dipasang panjang 1000 mm, 2 buah penyangga yang dapat diputar dan digeser panjang 1000 mm, penyangga dilapisi dengan felt, 4 buah roda kemudi, 2 di antaranya dengan pengunci. ----- Harga Tambahan: 1.311,00 Euro (netto) Klip: Paket Klip 15 mm (paket berisi 2000 buah): Harga 22,00 Euro Klip 12 mm (paket berisi 3000 buah): Harga 32,00 Euro Klip 10 mm (paket berisi 3000 buah): Harga 32,00 Euro Dimensi dan Berat ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Meja kerja 32 kg Semua harga dalam bentuk netto. Ditambah PPN. Harga dari pabrik, ditambah biaya pengemasan dan pengiriman. (Data teknis sesuai dengan produsen - tanpa jaminan!)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Nsdpfx Afeuiy Ngevolf Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Jumlah mesin: 1 unit Panjang kerja: 2500 mm Pengendali: tidak ada Hecht ES 350, Mesin pemotong profil kaca satu sisi Nedsvpr N Ropfx Afvelf ----- Pemutar secara pneumatis terhadap penahan tetap. 45º/90º/135º dengan penggerak mata gergaji secara pneumatis pemutaran pneumatis melalui penahan pemutar manual dengan kaki mesin, penegangan pneumatis Mata gergaji HM 350 x 3,0/2,2/30 Z 100 Ukuran rangka gergaji: panjang 700 mm, lebar 1.600 mm, tinggi 1.500 mm Penahan pengukur 1,5 m Dudukan 1,5 m dengan penyangga Penahan pengukur 3 m Perpanjangan dudukan dari 1,5 m menjadi 3 m dengan penyangga Sisipan meja beralur untuk profil kaca yang telah diproses HECHT ASB, penahan panjang manual dengan tampilan digital, 2500 mm Dilengkapi dengan perangkat penyedot debu (spesifikasi teknis sesuai dengan produsen – tanpa jaminan!)

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding Nledpfxjfyadbs Afvef • Workpiece-protecting removable beechwood slatted top • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line consists of: Unirex 3000 machining centre Njdpfxeh H Iyxj Afvslf Univar 15 Unitex 15

Kondisi: bekas, Tahun pembuatan: 2005, daya: 7,5 kW (10,20 hp), ketinggian potong (maks.): 170 mm, lebar pemotongan (maks.): 1.100 mm, diameter mata gergaji: 500 mm, penyesuaian kemiringan mata gergaji: 46 °, jenis penyesuaian ketinggian: hidrolik, lubang pisau gergaji: 30 mm, kecepatan rotasi (maks.): 5.500 rpm, kecepatan rotasi (min.): 2.800 rpm, panjang total: 3.300 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, berat keseluruhan: 1.500 kg, Perlengkapan: Penandaan CE, Format Circular Saw Martin T 73 BASIC Used, Year of Manufacture: 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw fence can be lowered Pneumatic spindle locking Cross table with fixed angle setting Telescopic length stop up to 3300 mm Sliding table with stepless locking Integrated contact for extraction unit control Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (L x W x H) Weight approx. 1500 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Sale as is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale No warranty is provided for used machines; the following applies: “purchased as inspected.” Terms of payment: Prices plus statutory VAT, payment prior to collection or shipping Nlsdjyymtdspfx Afvsf Delivery terms: ex stock

Kondisi: baru, Tahun pembuatan: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1,760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Nlodpfxjhpmawj Afvsf Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1,340 mm Machine width: 900 mm Machine height: 2,170 mm Weight: 178 kg