EUROPA otomatis dengan 4 rol penekan

EUROPA

Kondisi: baru, Pressure: 150 Motor: 15 Mounting height: 500 Max. stroke length: 400 Table size: 900 x 600 Ram surface: 900 x 600 Table height: 850 Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200 Weight approx.: 8000 Oil filling: 400 Hydraulic C-Frame Press General information: Construction type: C-frame design, hydraulic Press force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Painting: RAL 7035 – Light Grey Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control system: Mode 1: Setup mode without light sensor Mode 2: Automatic mode (single stroke) with light sensor PLC Control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft start Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measurement system: Linear scale (500 mm) Touchscreen: 9“ Siemens, storage for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external integration (e.g. robot, coil line) Work area lighting (dual) Hydraulic system: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 ccm, 65 l/min – REXROTH Auxiliary pump: available Tank volume: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram safety lock (top dead center position) Pressure & speed adjustable via PLC Mechanical data: Mounting height: 500 mm (distance ram – table plate) Stroke length: 400 mm Mounting depth: 650 mm Throat: 350 mm Table height: 850 mm (floor to top of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Speeds (adjustable via PLC): Approach: 120 mm/s Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & electronics: Main control cabinet Pressure & speed setting via PLC Swiveling operator panel Mobile two-hand control Light sensors SICK Stroke measurement system Screen: 9“ Siemens touchscreen Remote maintenance via Secomea module Hedpfswzzzfox Ahvsh Safety & operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding backwards) Operating manual & parts list (German), including maintenance schedule

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0153, de Hjdpfsnxi H Uex Ahvjh

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Feed volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic diagrams Comments: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantled press ram, disassembled into individual parts, overhauled the mechanics • Replaced the front two main running rollers • Replaced the knives on the press ram • Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals • Counter-blade in the frame replaced • Knife clearance adjusted to approx. 3 mm • Upper steel guide rails on the left and right in the frame replaced • Removed worn press floor, replaced base plate with wear-resistant HARDOX steel Hsdpfxjx Dnb Us Ahvjh • Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings • Replaced all wire spools in the needle heads • Cleaned and readjusted wire cutters, lubricated and tensioned chains • All wire guide rollers refurbished • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test. Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, de Hedpfx Ahsvm Abrevsh

Kondisi: baik (bekas), D&K Europa System B2 Laminator Hodpfx Ahox N I Tqsvoh Mesin berfungsi 100% dan siap digunakan. Mesin canggih dengan performa tinggi ini sangat ideal untuk laminasi komersial. Spesifikasi teknis: Ukuran maksimal lembar: 540 mm x 740 mm Ukuran minimal lembar: 210 mm x 220 mm Berat minimal: 115 gsm Berat maksimal: 400 gsm Suhu operasi: 80-145°C Berat: 750 kg Sumber daya: 380V Silinder baja berlapis krom Pengencangan, pemisahan, dan pengumpanan otomatis bertumpuk tinggi secara pneumatik. Akurasi pemberian lembar: ±2,0 mm Panel sentuh untuk pengoperasian mudah. Modul perata lembar. Jogger pengeluaran lembar.

Kondisi: baru, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram surface: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil capacity: 200Control / key switch: Hsdom Nntyspfx Ahvsh 1. Set-up mode: Manual without light sensor (max. 10mm/sec. speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guides: 2 pcs. Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110 mm/sec – Retract 200 mm/sec – Pressure: 9 mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design possible) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator's console Safety PLC – SICK Light sensors SICK 700 + 150mm Linear measuring scale for setting stroke length 9” PLC screen – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm indicator for malfunctions (light & sound) Dual work area lighting 8 free I/O on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: baru, Pressure: 60Motor: 11Mounting height: 450Stroke length (max.): 400Table size: 600 x 500 x 80Ram surface: 600 x 500 x 90Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,700Weight approx.: 4,000Oil capacity: 200Control / Key switch: 1. Setup mode manual without light sensor (max. 10 mm/sec speed) 2. Automatic mode (with full speed) with light sensor Main cylinder: Ø 150 mm Auxiliary cylinders: 2 pcs Ø 60 x 40 mm Auxiliary guides: 2 pcs Ø 40 mm Motor: 7.5 kW – 11 hp (IE-3) Pump: 18 cc – 26 liters / ASC Speed: Advance 110 mm/sec – Return 120 mm/sec – Pressure: 11 mm – 5/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 600 x 500 x 80 mm (with T-slots) Ram plate: 600 x 500 x 90 mm (with T-slots) Table height: 850 mm (floor to top edge of table plate) ----- Hydraulic accessories: Hsdpfx Aommuq Iehveh Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (10 – 60 tons) Speed adjustable via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control panel Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear encoder for stroke adjustment 7” PLC display – Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) Double work area lighting 8 free I/O channels on the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors can be moved to the rear)

Kondisi: baru, Pressure: 100 Motor: 11 Installation height: 500 Max. stroke length: 400 Hodpfx Aewrkctehvjh Ram adjustment: 790 x 600 Table height: Floor to top edge of table – 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 Weight approx.: 5,500 kg Oil fill: 200 DEMONSTRATION MACHINE Year of manufacture: 2023 Type: Hydraulic C-frame press Capacity: 100 tons at 230 bar Control / Key switch modes: - Setup mode – Manual, without light curtain - Automatic mode – At full speed and with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 units, Ø 50 x 30 mm - Auxiliary guides: 2 units, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 liters/min, helical gear pump Speeds: - Approach: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components from REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Speed adjustable via PLC - Air cooler - Pre-fill valve - Pressure holding valve Control accessories: - Siemens S7-1200 control - Main control cabinet - Safety PLC from SICK - Light curtains from SICK (700 mm) - Linear scale for stroke adjustment - 10" touchscreen from BEIJER (German & English) - Movable two-hand operation - Ethernet port for remote maintenance - Fault indicator with light and sound signal - Dual workspace lighting - Side safety doors (fold-out) - Hydraulic proportional valves - Dual-channel safety control - User manual & parts list (German) - Complies with current machinery directive EN 693 Oil volume: 220 liters (tank capacity: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1300 x 2000 x 2750 mm Paintwork: RAL 7035 Light grey & RAL 7016 Anthracite grey Machine inspection with power-on possible at our location in Böheimkirchen 3071 (Neustiftgasse 34).

Kondisi: baru, Pressure: 125Motor: 22Mounting height: 500Stroke length (max.): 400Table size: 800 x 600 x 120Ram area: 800 x 600 x 300Table height: 850Dimensions (LxWxH): 1,600 x 2,000 x 3,200Weight approx.: 7,000Oil fill: 400Control / Key switch: 1. Setup mode manual without light sensor (max. 10mm/sec travel speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 220 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Auxiliary guide: 2 pcs Ø 50 mm Motor: 15 kW – 22 hp (IE-3) Pump: 48 liters / ASC Speed: Advance 120 mm/sec – Return 140 mm/sec – Pressure: 13 mm - 5 mm/sec Mounting height: 500 mm Stroke length: 400 mm Table plate: 800 x 600 x 120 mm (with T-slots) (custom design possible) Ram plate: 800 x 600 x 300 mm (with T-slots & ribbed weld) Table height: 850 mm (floor to upper table edge) ----- Hydraulics accessories: Hydraulic control block & accessories: REXROTH Pressure setting via PLC (10 – 125 tons) Adjustable speed via PLC Air cooler Pre-fill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling control console Hodsmr Hpcjpfx Ahvjh Safety PLC – SICK Light sensors SICK 700 + 150 mm Linear scale for setting stroke length 9” PLC display – Siemens (German & English) Movable two-hand operation Ethernet connection for remote maintenance Alarm system for faults (light & sound) Double workspace lighting 8 free I/Os at the PLC for external connections The press complies with Machinery Directive Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With side safety door (doors are retractable to the rear)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2024, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Hsdeu Th D Rspfx Ahveh Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams