Rak kantilever, satu sisi, tinggi 3m, 1,20m

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Tahun pembuatan: 2021, Kondisi: baru, The prices listed in this advertisement are as of mid-2021. Due to the current international situation, steel and transport prices are rising almost daily. The availability of raw steel is tight and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with an up-to-date quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW – : Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transport cost within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional frames you can build longer or shorter rack units (also by varying bay distances); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: - 4 double-sided rack uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - with 2 x 3 adjustable arms each 1.20m, 500kg load capacity per arm - with ties approx. 1.30m - Upright, double-sided approx. 4160mm high, hot-dip galvanized - Base and arm depth 1200mm, each with 3 height-adjustable cantilever arms - Load capacity at load centre 600mm: 500kg per arm / 2250kg per upright side - With longitudinal and diagonal bracing, spacing e = 1300mm, standard is 1.30m Other standard frame lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies in addition to the price stated! Special sizes (other bay distances) are also available on request, but likewise subject to a surcharge and with a longer delivery time, as they must be custom fabricated! If you do not specify another bay distance, we will deliver the rack with a bay distance of 1.30m. Ffjdpfx Adoddmr Nsgjt In this case, the length of a rack line with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors.

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Max. cutting depth: 80 mm, Cutting area: 5300 x 2200 mm, Length: 6665 mm, Width: 3015 mm, Height: 1810 mm, Weight: 840 kg, with documentation. Fodpfjpcgy Hox Adgeft

Tahun pembuatan: 2021, Kondisi: baru, en-Kragarm rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW - : Price ex works incl. loading! 1 racking unit with 4 uprights €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Ffjdpfx Adoddmqyeget Of course, you can create longer or shorter racking units by omitting or adding additional frames (or by varying the bay spacing); this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: • 4 double-sided uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 Each with 2 x 3 adjustable arms, 1.20 m, load capacity 860kg per arm With bracing approx. 1.30 m • Upright, double-sided approx. 5180mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable arms per side Load capacity at load center 600 mm: 860kg per arm / 2,600kg per upright side Including longitudinal and diagonal braces, bay spacing = 1,300mm, standard is 1.30m. • Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m, a small surcharge applies to the stated price! • Special sizes (other bay spacings) are also available on request, but are subject to an extra charge and longer delivery time as these are custom manufactured! If you do not specify a different bay spacing, we will deliver the racking with a bay spacing of 1.30m. In this case, the length with a racking row of 4 uprights (3 bays) is approx. 4m. • Supplied with all bolts and nuts (shipped within Germany as a parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types etc.) available! Please contact us! Photos shown are of a similar rack!

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 4.16m high, 1.20m arms, 750kg per arm – New –: Price ex works, including loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also create longer or shorter racking units by omitting or adding uprights, or by varying the bay spacing. The example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: Arms: IPE 100 Uprights: IPE 160 Single-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity with load centre 600 mm: 750 kg per arm / 2250 kg per upright For 4 uprights per arm level: 4 x 750 kg = 3,000 kg Ffedpeddmp Usfx Adget With longitudinal and diagonal braces e = 1300 mm, standard is 1.3m – unless otherwise specified, we will supply the racking with a bay spacing of 1.3m. Other spacings possible (e.g. 1m, 1.25m) also available at a small surcharge: 1.5m or custom dimensions! Standard delivery length for one row with 4 uprights is approx. 4000 mm. Supplied with all bolts and nuts, without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Fsdpsvgnb Rsfx Adgoft Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex works, including loading! 1 racking unit with 4 uprights: €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can of course build longer or shorter racking units by omitting or purchasing additional frames (or by using varying axle spacings). This example with 4 frames represents the most common racking solution! A hot-dip galvanized cantilever racking system comprising: - Single-sided racking uprights, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Ffedpeddmp Ajfx Adget - Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms - Load capacity per arm (load center 600 mm): 750 kg / per upright 2,250 kg - With 4 uprights per level: 4 x 750 kg = 3,000 kg; arms IPE 100 - Supplied with longitudinal and diagonal bracing, c/c spacing 1,300 mm (standard is 1.30 m); if no other specification is given, racks will be delivered with 1.30 m axle spacing. Other spacings possible, e.g., 1 m, 1.25 m, or 1.50 m for a small surcharge, or custom measurements. - Standard overall length for a single row with 4 uprights is approx. 4,000 mm. - Delivery includes all bolts and nuts, but excludes floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us for advice!

Tahun pembuatan: 2017, Kondisi: baru, Cantilever racking, double-sided, 3.50 m height, 1.20 m arms, 750 kg per arm – NEW: Price ex location, loading included! 1 racking unit with 4 uprights €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50 m high, hot-dip galvanized - IPE 160 / 100 - Each upright equipped with 2 x 3 adjustable arms, 1.20 m long, load capacity 750 kg per arm - With braces approx. 1.30 m Fododdmtqjpfx Adgsft - Double-sided uprights, approx. 3500 mm high, galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at 600 mm load center: 750 kg per arm / 2250 kg per upright - With longitudinal and diagonal bracing, c/c = 1300 mm, standard 1.30 m - Other standard bay lengths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m - For lengths from 1.50 m, a small surcharge applies to the stated price - Custom dimensions (different bay distances) available on request, surcharges apply and lead time is longer as they are custom-made Unless you specify otherwise, racks are supplied with a bay distance of 1.30 m. With 4 uprights (3 bays) per racking row, total length is approx. 4 m. Supplied including all bolts and nuts (delivered within Germany directly from Würth by parcel service), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: bekas, Tahun pembuatan: 2007, RA1784 Ffsdpfx Ajk Abbbedgjt Galler OMEGA pallet racking system, used, 16,600 x 5,400 x 1,350 mm Set up inside a hall Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with stored goods Depth storage: 1,350 mm Storage configuration: 1. Stored goods on the floor 2nd to 5th stored goods on beam pairs, Beam pair shelf load at a clear bay width of 3,200 mm and shelf height of 1,500 mm: 2,100 kg Bay load: 8.4 t at 1,500 mm buckling length (min. 4 bays) →All load ratings apply for evenly distributed load. Finish: Upright frames: Sendzimir galvanized Load beams: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. single-sided racking bay, placed against a hall wall 5 x 3,300 + 100 = Total length 16,600 mm Consisting of: 6 pc. Galler Omega upright frames, bolted 5,400 x 1,350 mm 40 pc. Galler Sigma beams 3,200 mm 80 pc. safety pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optionally available if required: 2 pc. used corner rack protectors At the beginning/end and at entrances for rack upright protection For individual and professional advice, simply contact us. You can reach us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Tahun pembuatan: 2021, Kondisi: baru, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 500kg per arm – NEW: Price ex location, including loading! 1 racking unit with 4 uprights: €2,899 (net)! Shipping within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by using different bay widths); this 4-frame example is simply the most common solution! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 80 - each with 2x3 adjustable arms, 1.20m long, 500kg load capacity per arm - with cross bracing approx. 1.30m - Uprights double-sided, approx. 3500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm; standard is 1.30m. Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From bay width 1.50m an additional charge applies. Custom sizes (different bay widths) are available on request, also at an additional charge and with longer delivery times as they must be specially manufactured! If you do not specify a different bay width, we will deliver the racking with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us for options! Fsdjddmtcjpfx Adgjft

Tahun pembuatan: 2021, Kondisi: baru, 1 racking unit with 4 uprights €2,120 (net)! Surcharge for cantilever arms with guardrails for this rack: €40 Transport price within Germany (excluding islands): €490 (net)! Of course, you can also create longer or shorter rack units by omitting or purchasing additional frames (or by using different bay widths), this example with 4 frames is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided upright, approx. 3,500 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable arms Load capacity with a load center of 600 mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per storage level: 4 x 750 kg = 3,000 kg With horizontal and diagonal bracing, center distance = 1,300 mm; standard is 1.30 m. Fodpfx Adeddmqnegjft Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a length of 1.50 m onwards, a small surcharge applies to the stated price! Special dimensions (other bay widths) are available on request, but will also incur a surcharge and have a longer delivery time as they must be made to order! If you do not specify a different bay width, we will deliver the rack with a bay width of 1.30 m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany via parcel service directly from Würth), excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) are available! Please contact us!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized Ffsdjh Ek Daopfx Adget - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Tahun pembuatan: 2021, Kondisi: baru, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price ex works incl. loading! Ffodpfjddmq Tjx Adgjt 1 racking unit with 4 uprights €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different bay spacing); this example with 4 uprights is simply the most common racking solution!! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided racking uprights approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 adjustable arms each, 1.20 m, 500 kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 5,180 mm high, hot-dip galvanized Foot and arm depth 1,200 mm with 3 height-adjustable storage arms each Load capacity at load center 600 mm: 500 kg per arm / 2,600 kg per upright side With longitudinal and diagonal bracing, c/c = 1,300 mm; standard is 1.30 m Other standard bay lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From bay length 1.50 m a small surcharge applies to the stated price! Special dimensions (different bay spacings) are available on request, but also incur a surcharge and have a longer delivery time as they must be custom-made! If you do not specify other bay spacings, we will supply the rack with a bay spacing of 1.30 m. In this case, the length of a racking run with 4 uprights (3 bays) is approx. 4 m. Supplied with all bolts and nuts (dispatched within Germany in a package directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!