GARIS SENDI JARI MANUAL

EUROTECK ITALIA FJ-2000

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Bljdpfx Asw Sy T Hea Ujd Location: Nattheim

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Bsdowunwyjpfx Aa Usld Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: sangat baik (bekas), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) composed of: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - Left side cut 45° - Drilling Blsdpfx Aaoqwycls Uod - Cut 90° - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Model Teknomat 3000

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor Bjdpfxswclkyo Aa Uold The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: bekas, Tahun pembuatan: 2021, diameter mata gergaji: 800 mm, kecepatan rotasi (min.): 1.450 rpm, daya: 5,5 kW (7,48 hp), Cross-cut saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Robust steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety operation Coolant system Protective cover Optionally available with length measuring system or automatic positioning system Also available as saw-drilling or saw-punching automatic machine upon request. Bsdped Szf Nofx Aa Uold

Kondisi: bekas, Tahun pembuatan: 2001, Spindle tiltable: Yes, -25 to +45° Height adjustment: electric Bjdpfxswx Nnbj Aa Ujld Tilting adjustment: electric Spindle fence jaw adjustment: manual Spindle fence jaws: Aigner Integral 600mm Height display: digital Tilting angle display: digital Spindle fence position indicator: Siko counter Spindle diameter: 30 mm Pre-selectable spindle speeds: 1,500 / 3,000 / 4,000 / 4,500 / 5,000 / 6,000 / 8,000 / 9,000 / 10,000 rpm Motor power: 7.5 kW Motor brake: Yes, automatic Power feed unit: Wegoma, 4 rollers Extraction connection: 2 x 120mm Machine length: 1,900 mm Machine depth: 1,400 mm Weight: 1,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1996, Four-sided planer Weinig Unimat 23 – German made – Ribbed cast iron table – Year of manufacture: 1996 – Feed rollers integrated in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Ribbed table Spindle diameter: 40 mm 1st (bottom) spindle: 7.5 kW 2nd (right) spindle: 7.5 kW 3rd (left) spindle: 7.5 kW 4th (top) spindle: 11 kW 5th (bottom) spindle: 7.5 kW Feed speed, steplessly adjustable: 6–36 m/min Feed motor power: 5.5 kW Bljdpfxoh Dwl Do Aa Ujd Six steel top feed rollers Two rubber top feed rollers Three in-table feed rollers Pneumatic feed pressure Pneumatic shoe pressure Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Central (divided) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Kondisi: diremajakan ulang (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pelletpresse Bsdpfxjvdrtxo Aa Usld Hersteller – TEKNO UNO Modell – TK 304 Baujahr – 2014 Motorleistung – 50 kW Kapazität – 450 kg/h

Kondisi: bekas, Mechanical nailer by Wursten & Dietz. Prepared for nailing ice skates. The machine is sold as is. Bljdpfxelvripe Aa Usd