Unit pengelasan
EWM AG Tetrix 300 Comfort Puls

Name: EWM AG Tetrix 300 Comfort Puls
Brand: EWM AG
Availability: InStock

Tahun pembuatan

2021

Kondisi

Bekas

Lokasi

Jerman

Unit pengelasan EWM AG Tetrix 300 Comfort Puls

Tampilkan peta

Data mesin

Nama mesin:: Unit pengelasan

Pabrikan:: EWM AG

Model:: Tetrix 300 Comfort Puls

Tahun pembuatan:: 2021

Kondisi:: siap digunakan (bekas)

Harga & Lokasi

Lokasi:: Deutschland

Hubungi

Rincian penawaran

ID iklan:: A20024300

Nomor referensi:: INNO29928

Pembaruan:: terakhir pada 18.09.2025

Deskripsi

20 identical welding machines available. Model: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power input P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control system: Comfort 2.0 with intuitive operation via click-wheel. Pulse, spot, and normal modes continuously adjustable (especially for TIG welding), adjustable pulse pause ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approximately 15 kHz. ActivArc technology: dynamic arc control ensures consistent performance even with variations in torch distance and prevents electrode sticking, improved root and penetration quality. spotArc/Spotmatic functions for spot welding/tacking. 2-stroke/4-stroke modes selectable via torch trigger. Integrated manual electrode welding (often with stick pulse automation). Adjustable pre-flow and post-flow gas times; upslope/downslope time also controllable; torch modes accessible via torch button (e.g. reduced secondary current, etc.). Memory/JOB storage: Recurring welding tasks can be stored (depending on version, approx. 8-100 JOBs). Energy efficiency: high efficiency, standby function included. Remote control & interfaces: foot pedals, function torches connectable, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, on-site inspection possible.
Dkjdpfx Adjxdc Upjgjg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2017

1.989 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 30 58... iklan

+49 30 79... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Hürth

11.272 km

ROMER, lapisan bubuk
RomerKPZ-4P

Tahun pembuatan: 2019, Kondisi: baru, Model: KPZ-4P Type: Enclosed Working dimensions: 3500 W x 1800 H x 1000 D mm External dimensions: 3300 W x 2300 H x 1800 D mm Operation: Electric Power: 2.75 kW Voltage: 380 V Frequency: 50-60 Hz Filters: 6 pcs Filter type: Polyester Filter cleaning: Jet Venturi Filter area: 22.5 m² Fan material: Aluminium Fan noise level: 74 dBa Dedpfx Adjbxmfnogjkg Air consumption: 20,400 m³/h Warranty: 12 months

Lihat detail

Iklan kecil

Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 305 AutoCut

Hubungi

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version. Dodpfxefd Abas Adgekg

Lihat detail

Iklan kecil

Reiden

11.281 km

Fmb
FMBCalipso

Hubungi

Iklan kecil

4 gulungan lentur hidrolik DURMA HRB-4 3008

Austria

10.686 km

4 gulungan lentur hidrolik
DURMAHRB-4 3008

Hubungi

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions Dedsd Ab H Hepfx Adgskg • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Lihat detail

Iklan kecil

Meja putar pengelasan, manipulator, meja putar Protec KT 50

Hergensweiler

11.140 km

Meja putar pengelasan, manipulator, meja putar
ProtecKT 50

€1.250

VB ditambah PPN

Hubungi

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Dsdebambropfx Adgskg Packaging and shipping within Germany: approx. €80

Lihat detail

Iklan kecil

KELOMPOK PRODUKSI KEPALA TUNGGAL PVC PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ PVC TEK KAFALI ÜRETİM MAKİNE SETİ

Minareliçavuş

9.649 km

KELOMPOK PRODUKSI KEPALA TUNGGAL PVC
PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİPVC TEK KAFALI ÜRETİM MAKİNE SETİ

Hubungi

Iklan kecil

Ahaus

11.239 km

Mesin bor tegak
AlzmetallAlzstar 40 SV

€7.980

harga tetap ditambah PPN

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Dksdpfxod Hy Ele Adgsg Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Lihat detail

Iklan kecil