Rak bergerak

EZ-Wheel ezSWDcore.14x/C

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Hfedpfx Ast Hw T Soanog Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: sangat baik (bekas), Sunnen GH210 Mesin Honing Horizontal Tahun 2010 Panjang Langkah Maks.: 8000 mm Kecepatan Spindel: 0 - 300 rpm Daya Maks Spindel: 40 Hp (29,83 kW) Hodpfsw U Uh Dox Aansfg Daya Maks Stroker: 18 Hp (13,42 kW) Rentang Kecepatan Langkah: 0 – 100 ft/menit (0 – 30,5 m/menit) Rentang Diameter Dalam: 2 – 24 inci (50,8 – 609,6 mm) Diameter Luar Standar: 26 inci (660,4 mm standar) Berat Maksimum Bagian: 8000 kg Perkiraan Berat Mesin: 12.066 kg 400 VAC 50 Hz, 3 Fasa (85 A) Kontrol Siemens Simatic,

Kondisi: bekas, Module milling cutter Module 8 20 degrees Length 1800 mm Hfodpfx Aaedklt Noneg Diameter 120 mm Bore 40 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. Hfedjh Ek Daopfx Aanog According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, TRANSLATION Hedevm Eixopfx Aansfg YEAR: 2008 MAXIMUM RAM PRESSURE: 2,000 tons RAM STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm UPPER BLANKHOLDER PRESSURE: 300 tons BLANKHOLDER STROKE (ram): 200 mm RAPID TRAVERSE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE: 400 mm OVERALL HEIGHT FROM FLOOR: 9,145 mm FRONT OPENING (between uprights): 5,000 mm TOTAL WEIGHT: n/a

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes - Load capacity: 8,000 kg - Equipped with hand and foot remote control Hfsdpfxsf Ezdno Aanog - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm Condition: Visually and technically excellent, runs very quietly

Kondisi: bekas, Tahun pembuatan: 2005, Distance between centers 3050 mm Hfodpfx Aaowz Rg Dsnsg Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outside diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Peripheral speed of grinding wheel 6-50 RPM Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force: 1,500 t Column gap: 5,050 mm Stroke: 1,100 mm Distance table/ram, stroke up: 2,300 mm Table size: 5,000 x 2,700 mm Cushion force in table: 320 t Cushion stroke in table: 300 mm Cushion area in table: 4,300 x 1,830 mm Hjdpfx Aovuucqeanefg Cushion force in ram: 120 t Cushion stroke in ram: 200 mm Cushion area in ram: 3,410 x 1,650 mm Ram area: 5,000 x 2,400 mm Speed downwards: from 360 mm/s Speed upwards: 168 - 505 mm/s Working speed: 19 - 86 mm/s Oil capacity: 10,500 l Drive power: 450.0 kW Weight: 400.0 t Space requirements (W x D x H): 3.47 x 6.95 x 12.21 m Height above floor level: 8.21 m Height below floor level: 4.0 m Year of manufacture: 1983 - Overhauled in 1993 with oil hydraulic drive, cushion in table, cushion in ram (cushion area approx. 3,410 x 1,650 mm), shearing shock absorption / punching stroke limitation (spindle travel approx. 500 mm, max. punching damping force approx. 750 t, max. punching damping stroke approx. 30 mm), pressure-/time- and stroke-dependent control as is and where is, WITHOUT disassembly, WITHOUT loading

Kondisi: baru, Table diameter 2000 mm Table load capacity 10,000 kg Swivel range 0 - 130 degrees Rotation speed 0.02 - 0.2 rpm Height adjustment 1450 - 2200 mm Torque at faceplate 20,000 Nm Motor power 1.5 / 2.0 kW Hjdpfx Ajfv Ay Isansfg Welding current 1000 amperes - Manual height adjustment. - Self-locking gearbox, resulting in minimal overrun or backlash under eccentric loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, stepless rotation speed of the turntable. - High stability due to robust construction. - CE certificate. The D-HBE series is supplied as standard with a cable remote control and a foot switch.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Machining Center CWK 400 Year of Manufacture: 2005 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Rotary Table (4th Axis) Hedpfx Aaewpciaenefg CNC Control: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer: Chain magazine for 80 tools, HSK 63 2-station pallet pool Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools