Oven udara panas, oven bengkel, pemanas ruang

Fabbri F85 c.v.

Kondisi: baru, Dimensions (L x W x H): 960 x 460 x 860 mm Weight: 75 kg Pedpfx Anszdk E Ns Iera Number of drawers: 8 pcs Tool trolley, filled Contents and equipment as shown in the pictures

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa Prsdpfxsvz Hq Ho An Ija - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Tahun pembuatan: 2022, Kondisi: baru, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredder material, granulate, etc. Aluminum angled conveyor belt incl. subframe Horizontal section: 2,500 mm (adjustable) Inclined section: 4,000 mm (adjustable) Angle at the bend continuously and freely adjustable Prodpfjilg U Eex An Ioa Feed height: horizontal (customizable) Discharge height individually adjustable Construction: height-adjustable (mobile) Conveyor belt width: 600 mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and wave edge Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection 220/240V, 50Hz, protection class IP54 Drive and accessories ready for connection, motor control optional 8x adjustable machine feet for alignment Wave edge: 50 x 30 mm T-40 cleats - 300 mm pitch 2-ply, especially dimensionally stable across the belt We always have several such systems in stock. The delivery time for a customized system currently amounts to approximately 2–3 weeks, depending on manufacturing effort. Our core competence lies in providing customers exactly with the solution they truly need. We work together with our customers to develop custom, tailored solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well, so we can find the right solution for your application. Conveyor, conveyor system, discharge belt, belt conveyor, magnetic separator, crossbelt magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Kondisi: baru, Tahun pembuatan: 2026, Size: 3 Predpfx Asdlhbpon Ioa Nominal heat output: 87 kW -- Compliant with BImSchV Stage 2 and CE certified -- Combustion chamber fully lined with fireclay Suitable for rooms up to: 2,200 m³ (according to DIN) Fuel types: firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 25 - 30 kg/h Fan air capacity (free-blowing): 6,000 m³/h Outlet opening: Ø 500 mm Flue pipe connection: Ø 200 mm Weight: 1,250 kg PLC control cabinet: 380 Volt

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, A used briquetting press C.F. Nielsen BP 5000 in very good condition Podpfxowiw Rxj An Ijra

Kondisi: baru, Tahun pembuatan: 2026, Build size: 4 Nominal heat output: 116 kW -- BImSchV Stage 2 and CE compliant -- Combustion chamber fully lined with fireclay Suitable for rooms up to: 2,900 m³ (according to DIN) Fuel: firewood, chipboard, wood chips, briquettes Fuel consumption: 30 - 35 kg/h Fan air output, free-blowing: 7,500 m³/h Air outlet opening: Ø 600 mm Prodpfx Aodlhcdon Isa Flue connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 Volt

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2016, jam operasional: 90 h, Fungsionalitas: fungsi terbatas, jenis bahan bakar: diesel, daya: 44 kW (59,82 hp), daya nominal: 44 kW (59,82 hp), daya kontinu: 44 kW (59,82 hp), daya semu kontinu: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not functioning; oil is entering the engine and the oil pump needs replacement. Otherwise, technically in good condition. Start-up is possible. New fuel pump included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous operation in industrial or construction environments. Technical specifications: Model: ETT-55E Operating hours: 90 h Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Generator (alternator): WHI224D, brushless, with automatic voltage regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control and equipment: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switchboard – for mains/generator control Protection against overvoltage, overload, and low oil pressure Soundproof enclosure – reduced noise level Manual or automatic operation modes Application: The generator is suitable for: • Industrial enterprises, warehouses, and production facilities • Construction sites and mobile workstations • Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution when a stable, uninterrupted power supply is required. Predoxlngaopfx An Iea If you have any further questions, we will be happy to assist.

Kondisi: hampir baru (bekas), For sale is a used Felder AD7-41 jointer thickness planer with a planing height of up to 230 mm. The machine is currently used as a showroom model in our display area and is therefore in like-new condition. Pedpfx Answ Hckrs Iera Technical specifications: - 4-knife cutterhead system - Planing width: 410 mm - Jointer table length: 2,000 mm - Max. material thickness: 230 mm - Electric thickness adjustment PowerDrive - Dust extraction connection Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For further information, please call 06244-20299. Related terms: jointer, thickness planer, planing machine, jointer planer, thicknessing machine Reference: R-A0117

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm Predpfsvz Hq Tox An Isa - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Tahun pembuatan: 2024, Kondisi: baru, oven-technical-specifications-en Pedpopm Ex Hsfx An Isra