Pusat mesin

FAMUP MCP 45

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: FANUC, model controller: 21i-MB, tinggi total: 2.515 mm, lebar total: 2.800 mm, beban meja: 100 kg, berat keseluruhan: 3.100 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 5.000 W, jumlah slot dalam magazin alat: 16, berat alat: 4.000 g, panjang produk (maks.): 3.130 mm, jumlah sumbu: 3, This 3-axis vertical machining center, FAMUP MCP 45 E, was manufactured in 2004. It features an X-axis travel of 450 mm, a Y-axis travel of 300 mm, and a Z-axis travel of 400 mm. The machine is equipped with a spindle speed range of 50 to 10,000 rpm and a maximum table load capacity of 100 kg. If you are seeking high-quality machining capabilities, you should consider the FAMUP MCP 45 E that we are offering for sale. Contact us for further details. Pallet / Table: • Table size: 400 x 300 mm • T-slots: 2 x 14 x 80 mm • Central bore: Ø50 H6 • Pallet change time: 8 s Spindle: • Motor power S6 40%: 5 kW • Continuous power S1: 3.7 kW Kedoy Tl A Dopfx Ai Isnb Axis Performance: • Working feedrate X/Y/Z: 10,000 mm/min • Rapid traverse X/Y/Z: 30,000 mm/min • Working thrust S1 X/Y: 2,000 N • Working thrust S1 Z: 3,300 N Measuring System: • Indirect measuring system Accuracy: • Positioning accuracy X/Y/Z: ±5 µm • Repeatability X/Y/Z: ±1.5 µm • Reversal accuracy: 3 µm Tool Changer: • Tool selection: Random • Max. tool diameter: Ø63 mm • Max. tool length: 150 mm • Tool change time: 1.7 s • Chip-to-chip time: 2.5 s General Data: • Total installed power: 10 kW Technical Specification Taper size: ISO 30

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Ayunan di atas dudukan melintang 360mm, Diameter pemotongan maksimum 366mm, Panjang pemotongan maksimum 705mm, Kapasitas batang 80mm, Kecepatan spindle 4.000 rpm, Kecepatan milling 10.000 rpm, Daya spindle utama 18,5 kW, Sumbu C 0,001 derajat, Ksdpfxex Eitue Ai Ienb Sumbu Y -/+ 50mm, Turret 12 posisi. Mori Control M730BM, dilengkapi dengan Toolsetter, konveyor serbuk, chuck rahang 3, penangkap benda kerja, unit barfeed.

Kondisi: sangat baik (bekas), Boring depth 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors, the following from stock, non-binding: DEGEN Universal Deep Hole Drilling Machine Model UTB 500-2 Year of manufacture - _____ Boring depth 650 mm Drilling diameter with twist drill 16 mm Drilling diameter with single-lip drill 25 mm Spindle taper SK40 Stepless feed rate 0-120 mm Rapid traverse rpm Drilling unit vertically adjustable 250 mm Kodpfx Aisxx A D Te Ijnb Table size 570x1000 mm 4 T-slots 14 mm T-slot spacing 90 mm Table load capacity 1000 kg Table transverse travel 460 mm Table swivels through 360° Weight approx. 1,600 kg Accessories / Special equipment: • Compact freestanding design on a robust base • Deep drilling up to 500 mm length possible — ideal for longer drilling operations in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • The machine features digital readouts for X and Y axes (RSF Elektronik type Z 502, 0.01 mm display resolution) • A solid solution for workshops with the need for deep, straight drilling, as long as very large diameters or complex operations are not required • The Degen UTB 500 has been extensively modernized – now with Lenze feed drive, overhauled Y-axis, new glass scale encoder, new spindle bearings and new gas strut – delivering reliable precision and high performance Condition: good to very good – under power and ready for demonstration A video of the machine can be found here (please click the link): UTB 500/4 Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. More tool grinding machines in stock – please enquire!

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Knjdpfxelz Rvlo Ai Ieb Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: PM_1000, Used polishing machine for manual processing. Drive power: 5.5 kW Kodpfx Aiefiuguo Ionb Polishing discs diameter: 1000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 325 mm, lebar total: 185 mm, panjang total: 483 mm, berat keseluruhan: 16 kg, jenis pendinginan: air, sekring listrik: 16 A, arus pengelasan pada siklus tugas 100%: 175 A, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 250 A, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Set lengkap: Mesin las WIG LORCH T 250 DC Basic Plus dengan pendingin air WUK 7 dan aksesori Dijual sebuah mesin las industri profesional dari merek premium LORCH, tipe T 250 DC Basic Plus, yang dikombinasikan dengan unit pendingin sirkulasi air inovatif WUK 7. Sistem ini dirancang sebagai perangkat portabel serbaguna serta perangkat bengkel yang lengkap dan unggul dengan teknologi inverter mutakhir. Produsen: LORCH (Dibuat di Jerman) Model: T250 DC Basic Plus termasuk pendingin air WUK 7 opsional Kondisi: sangat baik, berfungsi penuh Lokasi penyimpanan: Graz _____ Isi pengiriman (Set Lengkap): • Mesin las inverter WIG LORCH T 250 DC Basic Plus Knodpfx Aieyxvwio Ieb • Unit pendingin sirkulasi air LORCH WUK 7 (koneksi langsung LorchNET) • Obor las WIG termasuk paket selang • Kabel arde • Unit perawatan untuk gas / regulator tekanan Harga baru sekitar 6000 € _____ Sorotan: • Solusi satu kabel inovatif: Berkat koneksi unit pendingin modern, seluruh sistem (inverter + pendingin air) hanya membutuhkan satu kabel daya. Catu daya dan kontrol cerdas yang disesuaikan untuk WUK 7 dilakukan langsung melalui bagian belakang sumber daya las. Tidak ada kabel yang berantakan saat pemasangan! • Teknologi inverter kelas atas: Kapasitas las penuh 250 A dengan desain yang ringkas. • Fungsi FastPuls (hingga 2 kHz): Sempurna untuk pengelasan lembaran tipis tanpa distorsi. • Mobilitas yang kuat: Unit dasar yang sangat ringan (hanya 16 kg), ideal untuk penggunaan berat dalam pembuatan kendaraan, bengkel, serta pembuatan tangki dan pipa. _____ Data teknis: • Rentang daya: 5 – 250 A • Siklus kerja (ED) pada 40°C: 60% = 200 A / 100% = 175 A • Tegangan jaringan: 400 V (sekring jaringan 16 A) • Kapasitas pendinginan (WUK 7): 0,53 kW • Berat: sekitar 16 kg • Dimensi inverter las Lorch T 250 DC: 483 x 185 x 325 mm (P x L x T) • Dimensi unit pendingin sirkulasi air Lorch WUK 7: 547 x 212 x 265 mm (P x L x T) _____ Perangkat ini dalam kondisi siap digunakan. Pemeriksaan dan uji coba dapat dilakukan setelah perjanjian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Knedpfeu Tuk Hox Ai Ijb

Kondisi: baru, Tahun pembuatan: 2023, CGM e41 generator set Continuous output (three-phase): 41.0 kVA / 32.8 kW Maximum output (three-phase): 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA – Approved for stationary use only Cooling system: Water-cooled Fuel: Diesel Cylinders: 4 Displacement: 3319 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Fuel consumption at 3/4 load (L/h): 8.5 Generator: MECC ALTE Type: Brushless AVR regulation Kjdpfoq A U Aijx Ai Ijnb Digital control unit: ComAp AMF Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Dry weight: 880 kg Fuel tank capacity: 200 l Features: Oil drip tray Coolant pre-heating Battery trickle charger 3-way valve Soundproof enclosure: RAL 5015 Sky Blue Base frame: Black

Kondisi: baik (bekas), Tahun pembuatan: 2008, used-6m-cnc-bending-press-amada Kjdpfx Aisy T Hlte Ijnb

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] Kodpjuhb Uhofx Ai Ijnb - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]