Band Saw Horizontal Band Saw Semi Otomatis

Fastech BMSY 320 DGH

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Itodeg U Uv Rspfx Akpeh Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 2011, Mesin dalam kondisi kerja yang sangat baik. Deskripsi dan detail teknis tersedia pada foto-foto. Itodpfox I Rkpex Akpjh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, berat keseluruhan: 41 kg, produsen pengendali: FANUC, jumlah sumbu: 6, en Itjdpfox D Ezlox Akpeh

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Itedpfx Ajfpb Nmokpeh Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: bekas, Tahun pembuatan: 2000, Diameter potong 280 mm Ijdjw En Efepfx Akpsth Panjang pita gergaji 4930 mm Area potong pada 90 derajat: persegi 280 x 280 mm Area potong pada 45 derajat: bulat 280 mm Area potong pada 45 derajat: persegi 280 x 280 mm Area potong pada 60 derajat: bulat 220 mm Area potong pada 60 derajat: persegi 200 x 200 mm Panjang pengumpanan 600 mm Panjang pengumpanan berulang 5400 mm Kecepatan pemotongan 17 - 90 m/menit Panjang sisa minimum/maksimum min. 30 mm Diameter potong minimum 10 mm Kontrol KASTO, Compact Control Kebutuhan daya total 5 kW Berat mesin sekitar 1,75 t Dimensi mesin P x L x T 2,68 x 2,54 x 1,59 m Aksesori: sistem pendingin, roller conveyor panjang 3300 mm, lebar 300 mm; roller conveyor panjang 1350 mm, lebar 300 mm

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Itedjlz Rvljpfx Akpjh Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2006, The Kahl twin-screw extruder is a machine manufactured by Kahl in 2006. It is currently stored in Germany and comes equipped with a fine material hopper, fine material discharge, fine material sack, a belt unit (type: BTK 1510-0), water dosing unit, extruder, and intake blower. The machine underwent a comprehensive overhaul in 2016. Additional features include dust removal, tumbling sieve, dedusting unit, final packaging, belt dryer, product hopper, tube chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust blower, airflow rotary dryer, feed table, mixer, as well as an additional intake blower and belt dryer. Delivery terms are FCA. Equipment: - 1 x Feed table - 1 x Tube chain conveyor - 1 x Mixer - 1 x Water dosing unit Itsdpfovfxqyjx Akpoh - 1 x Extruder - 1 x Intake blower - 1 x Cyclone - 1 x Rotary valve - 1 x Distributor - 1 x Belt dryer - 1 x Product hopper - 1 x Tube chain conveyor - 1 x Fine material hopper - 1 x Fine material discharge - 1 x Fine material sack - 1 x Intake blower - 1 x Belt dryer - 1 x Rotary valve - 1 x Dust sack - 1 x Exhaust blower - 1 x Airflow rotary dryer - 1 x Dedusting unit - 1 x Tumbling sieve - 1 x De-dusting unit - 1 x Final packaging - 1 x Belt unit, type: BTK 1510-0 Comprehensively overhauled in 2016

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 29-0288, Offer 04612 Technical Specifications: - Cutting range at 90°: round 260 mm - flat 450 x 240 mm - Cutting range at 45°: round 230 mm Itodjgin Ndepfx Akpsh - flat 240 x 200 mm - Machine is mounted on original rotary base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant device - Required space (approx.): W 2100 x H 1200 x D 1000 mm - Weight (approx.): 500 kg

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 4.9 kW - Spindle speed: 16,000 rpm LINEAR AXES - Travel X/Y/Z axis: 700 x 400 x 300 mm - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 m/min - Feed rate (X/Y/Z): 1 - 30,000 mm/min - Distance from table to spindle nose: 330 - 630 mm TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 - Tool change time: 0.8 sec TABLE - Table size: 800 x 400 mm - Max. table load: 250 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total connected load: 9.5 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,050 x 2,220 mm - Machine height: 2,497 mm - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 23,456 h - Operating hours: 16,703 h EQUIPMENT - Control: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Option: Extended memory 500 MB - Option: High Accuracy Mode BⅡ - Rotary table type: 4th axis CNC integrated * Manufacturer: YUKIWA * Model: DRC170-EU * 4th axis travel: 360° * Minimum 4th axis resolution: 0.001° * Clamping diameter: 140 mm * Center height: 135 mm * With tailstock * Coolant tank: 150 l * With high-pressure pump: 15 bar * With enclosure washing - Through-spindle coolant (TSC) - Tool measuring probe Isdpfx Akoxzu T Sepeth - Electrical transformer

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Control cabinet on the left X1 + R / X2 + R axes on linear guide Y1 + Y2 axis Iodpfxed Egc Aj Akpeth Hydraulic upper tool clamping Pneumatic sheet following device + front stops on linear guide Second two-hand operation Universal die 100 x 100 x 5,100 mm Gooseneck blade 280 x 5,100 mm Die centering plate, width = 111 mm