Pers pengosongan halus

FEINTOOL HFA 6300

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, en-de Kfjdpfxehh Hwlj Aahea

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Kfodpfxerdi Dlo Aahoa Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Kfjdjr D N Eqspfx Aahea Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Kedehigmbjpfx Aahefa Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 95 mm, diameter pembubutan: 930 mm, diameter pembubutan di atas alas geser: 930 mm, diameter pembubutan di atas carriage atas: 650 mm, panjang pembubutan: 5.000 mm, panjang total: 8.500 mm, lebar total: 1.800 mm, tinggi total: 1.800 mm, kecepatan spindel (maks.): 800 rpm, kecepatan spindel (min.): 8 rpm, berat keseluruhan: 8.000 kg, penjepit spindle: MK 6, en-001 Kodswk Iq Eopfx Aahofa

Kondisi: siap digunakan (bekas), diameter luar chuck: 6.000 mm, model controller: Siemens/Heidenhain, berat kosong: 220.000 kg, Tipe: SD 600/6500 4 sumbu terarah, spindle dengan alur bola Jarak antara kolom: 6500 mm Tinggi maksimum di bawah balok melintang: 4270 mm Gerakan vertikal balok melintang: 2500 mm Berat maksimum di meja: 160 ton Torsi meja: 30.000 Nm, 200 HP Gerakan vertikal Z1 Z2: 1750 mm Dua lift gunting independen di setiap sisi mesin bubut, dengan unit kontrol Diameter putar maksimum — bukaan: 6500 mm Daya pada spindle: 200 HP Tinggi maksimum benda kerja (sumbu Z): 4270 mm Jumlah kecepatan: 1 > 40 rpm Panjang: 20.500 mm Lebar: 8500 mm Kfedpfx Aowaiuqjahsa Tinggi: 6290 mm (di atas permukaan tanah)

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Kfsdpfx Aajhcnxrjhea Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Presskraft: 500 Tonnen Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Tahun pembuatan: 1992, Kondisi: sangat baik (bekas), Gebrauchte 700-Tonnen-H-Rahmen-Hydraulikpresse zu verkaufen Hersteller: Müller Presskraft (t): 700 Anzahl der Zylinder: 2 Kjdpfshcfzkjx Aahefa Tischabmessungen (X-Y/mm): 4000×2200 Stößelabmessungen (X-Y/mm): 4000×2200 Hub (mm): 1400 Durchgangshöhe bei O.T. (mm): 1920 Zugkissendruck (t): 400 Zugkissenhub (mm): 500

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: Ksdpfxed Nb A Ns Aahefa The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, 4-axis CNC vertical lathe Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofit) CNC: FANUC 0i Specifications: Turning capacity: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Turning speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Rams on crossrail: Vertical travel of right ram: 760 mm Vertical travel of left ram: 1200 mm Crossrail: Vertical travel: 1600 mm Kedpew Add Eefx Aahefa Dimensions (W x D x H, fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left ram Set of 4 jaws