Mesin pengikat tepi

Felder G 480

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg Cpodpfexl Ha Sex Aa Tew To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Processing center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-position tool changer. The NC410 control featured a floppy disk drive and a color monitor, as well as basic, graphically assisted programming options. Additionally, the Rover 20 already enabled pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Cjdpfx Aaelc Dwno Tspw Control cabinet: 950 x 700 x 1,300 mm Ex site

Kondisi: baik (bekas), Tahun pembuatan: 2002, Edge banding machine with jointing milling, otherwise fully equipped, PU adhesive can be used. Cedpjgmn H Asfx Aa Topw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, lebar benda kerja (maks.): 40 mm, tinggi total: 950 mm, panjang produk (maks.): 3.672 mm, This BRANDT edge banding machine, model Ambition 1110 KDF 110, was manufactured in 2016. It is a single-sided edge bander designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses ranging from 8 to 40 mm. Check the availability of this BRANDT edge bander Ambition 1110 KDF 110 for purchase. Contact us for further details. • Machine type: Single-sided edge bander for straight panel edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge material parameters • Workpiece thickness: 8–40 mm • Workpiece width: min. 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) • Edging material (coils): 0.4–3 mm • Edging material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one clockwise, one counter-clockwise) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable for flush, radius, or chamfer trimming • Profile scraper: For rounding or chamfering prefabricated PVC edges (max. 3 mm) • Glue joint scraper: Removes residual glue in the glue joint area • Control and electrics • Control system: EASY CONTROL EC 10+ with 7” widescreen touchscreen • Program memory: Up to 20 processing programs Cedpfx Ajyir S Nja Tspw • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for transport chain (standard) • Safety: CE compliant; dust tested (TRK max. 2 mg/m³) Technical Specification Feed speed 8 m/min

Kondisi: baik (bekas), Tahun pembuatan: 2011, Mesin Gergaji Panel HOLZ-HER Tipe: 1255 Kondisi: bekas Tahun produksi: 2011 Panjang potong: 6300 mm (maksimal) Tinggi potong vertikal: 2200 mm (maksimal) Tinggi pemangkasan horizontal: 2200 mm (maksimal) Ketebalan benda kerja: 60 mm (maksimal) Tinggi scoring horizontal: tinggi pemangkasan Tinggi scoring horizontal: 2040 mm (maksimal) Tegangan: 400V 50 Hz Berat: 920 kg Perlengkapan: - Manual operasi - Pemeriksaan UVV berikutnya: 05/2026 Codsx Hyr Hspfx Aa Topw

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit - Milling unit - Fine milling unit - Scraper Cpsdpfxjd Inkts Aa Tsw - Buffing unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 144 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 694355, berat keseluruhan: 235 kg, kapasitas angkut: 16 kg, jangkauan lengan: 1.610 mm, This is a KUKA KR 16-2 R1610 industrial robot, year of manufacture: 2017. We are pleased to offer you this robot also as a fully refurbished unit! Cpodpfx Aot N Szpsa Tew The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation - UserTech

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Cpedpfx Aaswka N Tj Tow Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: baik (bekas), Robot industri Produsen: Kuka Tipe: KR6, KR6-2, KR6arc Tipe: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Semua tipe dengan kontrol KRC2ed05 Cpodstuc U Rjpfx Aa Tsw Kuka KR6 KRC2ed05 Tahun pembuatan: 2006 Kuka KR6-2 KRC2ed05 Tahun pembuatan: 2011 Kuka KR6arc KRC2ed05 Tahun pembuatan: 2006-2007 = beberapa unit tersedia Kuka KR16L6 KRC2ed05 Tahun pembuatan: 2009 Kuka KR16L6-2 KRC2ed05 Tahun pembuatan: 2011 Kuka KR16 KRC2ed05 Tahun pembuatan: 2007-2009 = beberapa unit tersedia Kuka KR16-2 KRC2ed05 Tahun pembuatan: 2010-2012 = beberapa unit tersedia Kuka KR16-2 Speed KRC2ed05 Tahun pembuatan: 2012 = beberapa unit tersedia Kuka KR16-2 Foundry KRC2ed05 Tahun pembuatan: 2012

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 25167180701, Fungsionalitas: berfungsi sepenuhnya, daya: 4,5 kW (6,12 hp), tinggi benda kerja (maks.): 60 mm, tinggi total: 60 mm, lebar total: 1.000 mm, kebutuhan udara: 2.000 m³/jam, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 20 m/menit, kecepatan rotasi (min.): 4.000 rpm, CNC machining center Brand: Masterwood Model: Project TF 100 2.0 Technical Data: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Max. workpiece width: 1,000 mm (for all units) Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min Minimum and maximum workpiece sizes depend on weight and the length-to-width ratio. - Air tables in the working area - Roller support at both infeed and outfeed - Plate measurement sensor - Ball screw spindle and linear guides - Rack and pinion drive - Central lubrication system - DXF file import Milling Unit Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Including integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond cutters, 1 WPL finish cutter Prepped for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit configured for door processing, for machines with tool changers, fully equipped including special tool change position in the tool changer, angle gearbox for accommodating a lock case milling cutter, and a macro for lock cases Automatic, program-controlled central lubrication Cedpfx Aajxz Hgdo Tjpw Monitoring camera